Stoichiometric dye-binding procedure for the determination of the reactive lysine content of soya bean protein

A new analytical method has been developed for the determination of the reactive lysine content of soya bean protein. The method is based on the reaction of the free basic groups of the protein with 1-phenylazo-2 naphthol-6,8 disulphonic acid. With regard to the stoichiometry of the procedure, it has been proved, contrary to earlier reports, that the basic amino acids, histidine, arginine and lysine, each combine with one mole of the dye. After acylation with propionic anhydride lysine alone loses its dye reactivity. The usefulness of the proposed method has been demonstrated by the determination of the reactive lysine content of several untreated, heat-treated and acid-treated soya bean samples. The results show that heat damage of about 5% in reactive lysine content can be measured in 1·5 h with good reproducibility.     

Effect of Methionine Supplementation on Nitrogen Balance in Infants Fed a Low-Cost Soy-Oats Formula

A nitrogen balance study, comparing a low-cost soy-oats infant formula with and without supplemental methionine, was carried out with infants of ages 3 - 26 months at a single equivalent level of nitrogen intake (approximately 850 mg/kg/day). Nitrogen retention was found to be unaffected by methionine supplementation. Com- parison of data obtained in this study with previous research re- vealed that a critical value for intake of total L-sulfur amino acids apparently exists in infants 3 - 26 months of age, below which methionine supplementation will increase nitrogen retention, but above which it will not. This value appears to coincide with that of 49 mg/kg/day recommended for infants by the FNB.     

Influence of weld misalignment and weld metal overmatch on the prediction of fracture in pipeline girth welds

$\text{J-}\text{integral}$ estimates using elastic-plastic finite element calculations, are shown to compare well with experimental results from single edge-notch bend (SENB) specimens made of X483 grade line pipe steel.The influence of weld misalignment and weld metal overmatch on fracture of cracked girth welds is predicted, also using elastic-plastic finite element calculations. Weld metal overmatch reduces plastic strain levels in the weld and appears beneficial in reducing $\text{J-}\text{integral}$ magnitudes. Predicted values of $\text{J-}\text{integral}$ are shown to increase with weld misalignment. However, $\text{J-}\text{integral}$ magnitudes near the critical value for crack growth initiation were only attained after considerable plastic straining at or near limit load. This result suggests that limit load calculations may be more appropriate for prediction of failure of cracked girth welds than conventional fracture techniques.     

Interconnection of Subsystem Reduced-Order Models in the Electrothermal Analysis of Large Systems

Heat conduction in an electronic device is commonly modeled as a discretized thermal system (e.g., finite element or finite difference models) that typically uses large matrices for solving complex problems. The large size of electronic-system heat transfer models can be reduced using model reduction methods and the resulting reduced-order models can yield accurate results with far less computational costs. Electronic devices are typically composed of components, like chips, printed circuit boards, and heat sinks that are coupled together. There are two ways of creating reduced-order models for devices that have many coupled components. The first way is to create a single reduced-order model of the entire device. The second way is to interconnect reduced-order models of the components that constitute the device. The second choice (which we call the "reduce then interconnect" approach) allows the heat transfer specialist to perform quick simulations of different architectures of the device by using a library of reduced-order models of the different components that make up the device. However, interconnecting reduced-order models in a straightforward manner can result in unstable behavior. The purpose of this paper is two-fold: creating reduced-order models of the components using a Krylov subspace algorithm and interconnecting the reduced-order models in a stable manner using concepts from control theory. In this paper, we explain the logic behind the "reduce then interconnect" approach, formulate a control-theoretic method for it, and finally exhibit the whole process numerically, by applying it to an example heat conduction problem     

Ochratoxin A in pork kidneys--description of a method

A rapid procedure for the isolation and clean-up on a silica gel column is described for the determination of Ochratoxin A from pork kidneys. The detection limit is 0.3 microgram/kg.     

Microstructure of Selected Binary Food Powder Mixtures

Binary mixtures of sugar, citric acid, malic acid, soy protein and starch, after exposure to various relative humidities, were analyzed by Scanning Electron Microscopy (SEM). It is shown that depending on interparticle surfaceaffinity, concentration and relative humidity, the mixtures could be random, partially random, ordered or partially ordered. The type of bridging, between the aggregated particles depended on their chemical species and the availability of surface moisture.     

Development of a simple low-cost solar simulator for indoor collector testing

Indoor test methods for solar collectors are widely accepted and recommended by ASHRAE. The development of a solar simulator for indoor testing and the certification procedure for photo-thermal solar devices is discussed in this paper. The system consists of 14 quartz halogen lamps and provides a testing area of about 1 × 1 m. The irradiance can be varied from 400 to 1500 W/m². This is achieved by varying the input power supplied to individual lamps. The radiation output characteristics of a single lamp have been studied. The distribution of intensity over the covered area of 1·20 × 1·20 m has been recorded using a precision Eppley pyranometer.A variety of collectors—evacuated tubular collectors and flat-plate collectors of both liquid and air heating types—has been tested under sufficiently stable insolation conditions. Results for a conventional solar air heater are presented together with suggestions for further improvements.     

Special finite elements with holes and internal cracks

For the numerical treatment of stress concentration problems in plane elasticity, special finite elements with circular and elliptic holes and internal cracks have been developed. Two different variational formulations have been used to construct elements, which may be combined with conventional displacement elements. Using complex functions and conformal mapping techniques the systematic construction of trial functions is shown which not only satisfy a priori the governing differential equations but also the boundary conditions on such influential boundary portions as hole or crack surfaces. For the evaluation of the stiffness matrices of the special elements, only boundary integral computations arc necessary. The numerical results of various examples are very accurate for both functionals.