An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

Considerations for polarization insensitive optical switching and modulation using strained InGaAs/InAlAs quantum well structure

It is shown that In/sub 1-x/Ga/sub x/As/In/sub 0.52/Al/sub 0.48/As MQW structures with the wells under tensile strain obtained by the appropriate selection of the Ga mole fraction and well size can achieve polarization-insensitive optical switching and modulation for a wide range of wavelengths between 1.0 and 1.6 mu m. For example, a change in refractive index of -0.5% at about 1.55 mu m will facilitate an intersectional angle of more than 10 degrees in a total internal reflection switch which can be readily fabricated. Hence, this material system is promising for long-wavelength polarization-insensitive semiconductor optoelectronic devices.<>     

穿壁焊极柱合金探索

本文对起动用铅酸蓄电池穿壁焊极柱用合金配方进行了探索 ,并得到了良好的应用效果     

山西铝厂锅炉水冷壁膨胀异常原因分析及对策

针对山西铝厂160t／h锅炉在实际运行中膨胀异常的问题，对不同的施工方法下，水冷壁膨胀量是否正常这一问题进行分析，找出了水冷壁膨胀异常的原因，并提出了解决对策。     

铜在高纯净钢中析出过程的观察

利用透射电子显微镜观察了铜在高纯净钢中的析出过程，发现早期析出阶段有类B2结构的亚稳相出现，分析了铜在高纯净钢中的析出贯序，研究结果对分析铜在高纯净钢中的时效强化机理具有重要意义。     

纳米β-Ni(OH)2与球型Ni(OH)2的热性能比较研究

用配位沉淀法合成出纳米级Ni（OH）2，并对其进行XRD，TEM，DSC分析，分析结果表明，所得纳米β-Ni（OH）2为可用作电极材料的β-Ni（OH）2，粒径为30－40nm，且热分解温度比普通球镍低10℃左右，摩尔分解热比普通球镍低4－7kJ，从理论上分析了产生此现象的原因。     

螺旋翅片管的换热计算

本文引入区域平均表面传热系数的概念。在实验研究的基础上进行了肋基和肋端温度分布预测及肋片换热数值计算。     

采用活性非均匀分布催化剂中变反应器的模拟计算

模拟计算表明:采用活性趋于表层的分布,可以较明显地提高国产中温变换催化剂的内表面利用率,有效地节省催化剂用量,而对“热点”温度没有多大影响。