Analysis of viscoelastic Bernoulli–Euler nanobeams incorporating nonlocal and microstructure effects

The present study introduces an analytical–computational model to simulate the effects of different simultaneous aspects on the behavior of nanobeams. The first one deals with the space nonlocality interaction and taking into account the microstructure effects, which has been formulated by using the nonlocal couple-stress elasticity. The second factor deals with the memory-dependent effect and has been investigated in the framework of linear viscoelasticity theory. It is the first time to apply the coupled effects of the microstructure and long-range interactions between the particles, to reflect the size-dependency of viscoelastic structures. Bernoulli–Euler nanobeam is taken as a vehicle to present the details of the proposed model. Eringen nonlocal elasticity and the modified couple-stress theory are used to formulate the two phenomena of long-range cohesive interaction and the microstructure local rotation effects, respectively. Boltzmann superposition viscoelastic model, endowed by Wiechert series, is used to simulate the linear behavior of isotropic, homogeneous and non-aging viscoelastic materials. The extended Hamilton’s principle is applied to formulate the analytical model of mechanical behavior of the nonlocal couple-stress nanobeam. The model has been verified and some results are compared with those published in the literature and a good agreement has been obtained. It is shown that the material-length scale parameter, nonlocal parameter, viscoelastic relaxation time and length-to-thickness ratio have a significant effect on the bending response of viscoelastic nanobeams with various boundary conditions.     

An Evaluation of the Crosier's CUSUM Control Chart with Estimated Parameters

We evaluate the performance of the Crosier's cumulative sum (C‐CUSUM) control chart when the probability distribution parameters of the underlying quality characteristic are estimated from Phase I data. Because the average run length (ARL) under estimated parameters is a random variable, we study the estimation effect on the chart performance in terms of the expected value of the average run length (AARL) and the standard deviation of the average run length (SDARL). Previous evaluations of this control chart were conducted while assuming known process parameters. Using the Markov chain and simulation approaches, we evaluate the in‐control performance of the chart and provide some quantiles for its in‐control ARL distribution under estimated parameters. We also compare the performance of the C‐CUSUM chart to that of the ordinary CUSUM (O‐CUSUM) chart when the process parameters are unknown. Our results show that large number of Phase I samples are required to achieve a quite reasonable performance. Additionally, the performance of the C‐CUSUM chart is found to be superior to that of the O‐CUSUM chart. Finally, we recommend the use of a recently proposed bootstrap procedure in designing the C‐CUSUM chart to guarantee, at a certain probability, that the in‐control ARL will be of at least the desired value using the available amount of Phase I data. Copyright © 2015 John Wiley & Sons, Ltd.     

Intelligent Firefly Algorithm Deep Transfer Learning Based COVID-19 Monitoring System

With the increasing and rapid growth rate of COVID-19 cases, the healthcare scheme of several developed countries have reached the point of collapse. An important and critical steps in fighting against COVID-19 is powerful screening of diseased patients, in such a way that positive patient can be treated and isolated. A chest radiology image-based diagnosis scheme might have several benefits over traditional approach. The accomplishment of artificial intelligence (AI) based techniques in automated diagnoses in the healthcare sector and rapid increase in COVID-19 cases have demanded the requirement of AI based automated diagnosis and recognition systems. This study develops an Intelligent Firefly Algorithm Deep Transfer Learning Based COVID-19 Monitoring System (IFFA-DTLMS). The proposed IFFA-DTLMS model majorly aims at identifying and categorizing the occurrence of COVID19 on chest radiographs. To attain this, the presented IFFA-DTLMS model primarily applies densely connected networks (DenseNet121) model to generate a collection of feature vectors. In addition, the firefly algorithm (FFA) is applied for the hyper parameter optimization of DenseNet121 model. Moreover, autoencoder-long short term memory (AE-LSTM) model is exploited for the classification and identification of COVID19. For ensuring the enhanced performance of the IFFA-DTLMS model, a wide-ranging experiments were performed and the results are reviewed under distinctive aspects. The experimental value reports the betterment of IFFA-DTLMS model over recent approaches.     

The performance of multiwavelets based OFDM system under different channel conditions

In wireless communication reception, the reliability of orthogonal frequency division multiplexing (OFDM) is limited because of the time-varying nature of the channel. This causes inter-carrier interference (ICI) and increases inaccuracies in channel tracking. This can effectively be avoided at the cost of power loss and bandwidth expansion by inserting a cyclic prefix guard interval before each block of parallel data symbols. However, this guard interval decreases the spectral efficiency of the OFDM system as the corresponding amount. Recently, it was found that based on Haar-orthonormal wavelets, discrete wavelet-based OFDM (DWT-OFDM) is capable of reducing the inter symbol interference (ISI) and ICI, which are caused by the loss in orthogonality between the carriers. DWT-OFDM can also support much higher spectrum efficiency than discrete Fourier-based OFDM (DFT-OFDM). In this paper the DFT-OFDM is replaced by Multiwavelets OFDM (DMWT-OFDM) in order to further reduce the level of interference and increase spectral efficiency. It is found that proposed Multiwavelet design achieves much lower bit error rates, increases signal to noise power ratio (SNR), and can be used as an alternative to the conventional OFDM. The proposed OFDM system was modeled tested, and its performance was found under different channel conditions.     

Analysis,modeling, and design of cascaded defected microstrip structure for planar circuits

In this article, two cascaded defected microstrip structures (CDMSs) are proposed to increase the effective inductance. So the cutoff frequencies of filters made by CDMSs can be controlled. The proposed CDMSs have wider stopband characteristic and sharper transition from passband to stopband than defected microstrip structure (DMS). To show the behavior variations of the effective inductance, the DMS and CDMSs have been analyzed, compared, and their design parameters are formulated. These parameters are necessary for a fast filter design procedure. Also, the models of DMS and CDMSs using the very simple lumped element forms are presented according to the physical parameters. The results of the proposed models have been compared with those obtained by full wave analysis. To verify the proposed DMS model, the comparison in response not only has been considered in amplitude but also in phase of all S‐parameters of proposed model and full wave analysis. It is obvious that the stopband is enhanced by periodically cascading the DMS. Surviving of EMC aspects between DMS, DGS, and CDMS is considered and compared. Finally, the theoretical results are validated by comparison with simulations of the structures and experimental results. The simulations from modeling results are found to be in good agreement with the full wave analysis and measurement results in the range of 0.5–35 GHz. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

MobiEureka: an approach for enhancing the discovery of mobile web services

While several service discovery protocols and standards have been proposed for supporting service discovery from mobile devices, this remains a challenging problem. In many cases, mobile clients may discover services which they consider relevant but soon realize that such services are not completely usable on their mobile devices due to compatibility and interoperability issues. Without integrating device capabilities into the discovery process, or a device-aware mobile service discovery, it becomes extremely difficult to determine whether discovered services may or may not function properly within the device’s constraints. This paper introduces a solution known as MobiEureka, a mobile device-aware system for enhancing the discovery of mobile web services from mobile devices. Experimental validation, results, and analysis of the introduced ideas are discussed.     

Empirical comparison of three metrics suites for fault prediction in packages of object-oriented systems: A case study of Eclipse

Packages are important high-level organizational units for large object-oriented systems. Package-level metrics characterize the attributes of packages such as size, complexity, and coupling. There is a need for empirical evidence to support the collection of these metrics and using them as early indicators of some important external software quality attributes. In this paper, three suites of package-level metrics (Martin, MOOD and CK) are evaluated and compared empirically in predicting the number of pre-release faults and the number of post-release faults in packages. Eclipse, one of the largest open source systems, is used as a case study. The results indicate that the prediction models that are based on Martin suite are more accurate than those that are based on MOOD and CK suites across releases of Eclipse.     

Recognition of Arabic (Indian) bank check digits using log-gabor filters

In this paper we present a technique for the automatic recognition of Arabic (Indian) bank check digits based on features extracted by using the Log Gabor filters. The digits are classified by using the K-Nearest Neighbor (K-NN), Hidden Markov Models (HMM) and Support Vector Machines (SVM) classifiers. An extensive experimentation is conducted on the CENPARMI data, a database consisting of 7390 samples of Arabic (Indian) digits for training and 3035 samples for testing extracted from real bank checks. The data is normalized to a height of 64 pixels, maintaining the aspect ratio. Log Gabor filters with several scales and orientations are used. In addition, the filtered images are segmented into different region sizes for feature extraction. Recognition rates of 98.95%, 98.75%, 98.62%, 97.21% and 94.43% are achieved with SVM, 1-NN, 3-NN, HMM and NM classifiers, respectively. These results significantly outperform published work using the same database. The misclassified digits are evaluated subjectively and results indicate that human subjects misclassified 1/3 of these digits. The experimental results, including the subjective evaluation of misclassified digits, indicate the effectiveness of the selected Log Gabor filters parameters, the implemented image segmentation technique, and extracted features for practical recognition of Arabic (Indian) digits.