Non-uniform Euler-Bernoulli beams under a single moving oscillator: An approximate analytical solution in time domain

Dynamic responses of simply supported non-uniform beams traversed by a moving oscillator are analysed in this paper. An approximate analytical method based on Rayleigh-Ritz (R-R) formulation is developed. The fundamental approximate mode obtained from R-R method is used in the present formulation to determine the responses of the beam and the oscillator. Effects of surface irregularities on the displacement and acceleration responses of the beam and the vehicle are also analysed. The results are compared with those obtained using Finite element method (FEM). A numerical example is provided to illustrate the validity of the present method which shows that the proposed method is simple, computationally more efficient compared to FEM and gives fairly good results. Though the single-mode approach used in the present paper is a classical one and numerous studies on the responses of uniform beams under moving loads have been reported in the past, its application to non-uniform beams (for which there does not exist any closed form expression for mode shapes) under a moving load, especially a moving oscillator, is presented for the first time.     

Water generation from atmospheric air by using different composite desiccant materials

In this communication, new composite desiccant materials having 37% concentration of CaCl₂ have been compared for water production from atmospheric air. The vermiculite–saw wood, jute and burnt-clay have been used as host materials and CaCl₂ as a hygroscopic salt. All the desiccant materials have been tested with the solar glass desiccant box type system (SGDBS) with a collector area of 0.36?m². Design parameters for water production are: height of the glass from the desiccant bed to be 0.22?m, an inclination angle of 30°, the effective thickness of the glass as 3?mm and the number of glazing is single. It has been found that on the experimental day, the maximum amount of fresh water generated by the vermiculite–saw wood/CaCl₂ is 130?ml/kg/day.     

Experimental analysis of the effects of cerium oxide nanoparticles on a single-cylinder diesel engine using biofuel blended with diesel as fuel

Energy demand is the hot topic of all developing and developed countries. Energy demand has been increasing day by day at a high rate. So, it is necessary to find an alternative solution that is eco-friendly. Biodiesel can be the alternative solution for this problem. The main purpose of this paper is to test the engine performance and emission parameters of a diesel engine using pure cinnamon oil blended with diesel and using cerium oxide as a catalyst. The parameters measured are brake power, brake thermal efficiency, specific fuel conception, CO₂, CO, NO_x and HC.     

Investigation of Nd3+ incorporation in Ce-rhabdophane: Insight from structural flexibility and occupation mechanism

LnPO₄ · 0.667H₂O rhabdophane has been considered as a potential material for the precipitation of actinides from radioactive waste liquid, owing to its outstanding characteristics of high actinide bearing and easy synthesis in acid solutions. However, a comprehensive understanding of the actinide occupation and the precipitation response of rhabdophane to remove actinides has yet to be established. In this study, the effect of ions concentration and pH values on the detailed precipitation reaction of Ce_xNd_1-xPO₄ · 0.667H₂O rhabdophane in acid solutions are systematically investigated. Some specific issues such as structural distortion and flexibility, and occupation mechanism are discussed by combining with experiments and density functional theory (DFT) calculation. The results reveal that ions concentration and pH values have a significant impact on the crystallization nucleation step before 12 h. The obtained removal rate of Nd³⁺ is more than 99% in pH 1–5 solutions with the ions concentration of 0.05–0.1 mol/L. Moreover, incorporating Nd in CePO₄ · 0.667H₂O rhabdophane will easily result in the lattice distortion in b-axis. DFT calculation and X-ray photoelectron spectroscopy (XPS) results reveal that Nd is preferentially incorporated in nonhydrated site to form a weaker binding energy of NdO₈ polyhedron.     

Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating

Multilayer solar selective absorber coatings have been developed in the last few decades. The thermal stability in terms of microstructure gives an insightful understanding of the optical properties of such coatings. In this context, we extensively utilized transmission electron microscopy (TEM) analysis to establish the thermal stability of TiB₂/Ti(B,N)/SiON/SiO₂ coating, under thermal cycling/continuous heating to 500°C in vacuum for 250 h. In particular, this work reports the variation in the solar absorptance of TiB₂/Ti(B,N)/SiON/SiO₂ coating with different angles of incidence of the solar radiation. Extensive analysis using the TEM technique reveals the presence of oxide interlayers that act as diffusion barrier layers to enhance the thermal stability of the coating. Computational simulation using SCOUT software validates the measured reflectance spectrum of the developed multilayer coating. The minor changes in absorptance and emissivity after heat treatment in vacuum at 500°C, together with high solar absorptance over a broad angular variation, establish the potential application of TiB₂/Ti(B,N)/SiON/SiO₂ as a selective coating in concentrated solar power systems.     

Preparation,structural, and characterizations of SnO2-coated TiNb2O7 anode materials for lithium-ion batteries

SnO₂-coated TiNb₂O₇ powders were synthesized via the solution coating method in the present research. The SnO₂ layers with a thickness of 3–5 nm were homogeneously coated on the surface of TiNb₂O₇ particles. TiNb₂O₇ coated with SnO₂ of 5 mol% with high Li⁺ diffusion coefficient delivered the discharge capacity of 319.5 mAh/g, which was 6.6% higher than that of the non-coated samples. The enhancement of capacity for the coated TiNb₂O₇ was owing to the low charge-transfer resistance of 17.5 Ω in contrary to the non-coated TiNb₂O₇ (27.8 Ω). SnO₂-coated TiNb₂O₇ possessed an improved capacity retention of 85.2% at 5 C after 100 cycles, superior to the non-coated TiNb₂O₇ (79.8%). On the other hand, the excessive amounts of SnO₂ coating led to the reduction in the capacity of the prepared samples. The excessive amounts of SnO₂ layers suppressed the Li⁺ diffusion and increased the charge-transfer resistance. The obtained results in this study indicated that coating of TiNb₂O₇ with appropriate amounts of SnO₂ significantly improved the electrochemical performance of TiNb₂O₇.     

Partial replacement of carbon black with graphene in natural rubber/butadiene rubber based tire compound: Investigation of critical properties

Journal of Polymer Research - In this study, we prepared graphene oxide-based styrene/acrylic elastomeric disks (GSAE) from sugarcane bagasse/ferrocene (GO) and styrene/acrylic emulsion (SAE) to...     

Visible Light Photocatalysis on Magnetically Recyclable Fe3O4/Cu2O Nanostructures

Catalysis Letters - Magnetically recyclable visible light photocatalysts for the degradation of critical organic pollutants are an urgent industrial requirement. Nonetheless, one component...     

Bioprocess Scale-up for Acetohydroxamic Acid Production by Hyperactive Acyltransferase of Immobilized Rhodococcus Pyridinivorans

Catalysis Letters - In this study, Rhodococcus pyridinivorans cells containing hyperactive acyltransferase was immobilized on various macromolecules based-polymeric matrices and used to improve...