Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.     

In Vivo Metabolic Responses to Different Formulations of Amino Acid Mixtures for the Treatment of Phenylketonuria (PKU)

Phenylketonuria (PKU) is a rare autosomal recessive inborn error of metabolism where the mainstay of treatment is a Phe restricted diet consisting of a combination of limited amounts of natural protein with supplementation of Phe-free or low-Phe protein substitutes and special low protein foods. Suboptimal outcomes may be related to the different absorption kinetics of free AAs, which have lower biological efficacy than natural proteins. Physiomimic Technology^TM is a technology engineered to prolong AA (AA-PT) release allowing physiological absorption and masking the odor and taste of free AAs. The aim of these studies was to assess the impact of AA-PT formulation on selected functional and metabolic parameters both in acute and long-term experimental studies. Adult rats in fasting conditions were randomized in different groups and treated by oral gavage. Acute AA-PT administration resulted in significantly lower BUN at 90 min versus baseline. Both BUN and glycemia were modulated in the same direction as intact casein protein. Long-term treatment with AA-PT significantly reduces the protein expression of the muscle degradation marker Bnip3L (−46%) while significantly increasing the proliferation of market myostatin (+58%). Animals dosed for 15 days with AA-PT had significantly stronger grip strength (+30%) versus baseline. In conclusion, the results suggest that the AA-PT formulation may have beneficial effects on both AA oxidation and catabolism with a direct impact on muscle as well as on other metabolic pathways.     

Kuppelproduktion und Umweltpolitik: Eine Fallstudie zur Chlorchemie und zur Schwefelsäureindustrie

Joint Production and Environmental Policy: A Case Study for the Chlorine and Sulphuric Acid Industry The chemical industry is a key sector of industrialised economy. Thus, environmental policy with a focus on the chemical industry is likely to affect the economy as a whole. In this article we show, that environmental regulation of the chemical industry has major consequences for other production sectors. Two major problem areas of the chemical industry are considered: the chlorine industry and the sulphur industry. While the chlorine industry can cope with environmental legislation by process and product innovation without a substantial impact on other sectors, this is not the case with the sulphur industry. The production of its key product, sulphuric acid, utilises joint products of other sectors as inputs. The chemical industry offers these sectors the possibility to dispose of their unwanted by-products. Environmental policy, directed towards a reduction of sulphuric acid is likely to cause a waste disposal problem in sectors which manufacture sulphur or sulphur dioxide as by-products. Solving environmental problems within the chemical industry therefore creates new problems in other sectors.     

Ein Stoffdaten-Informationssystem für die Chemische Technik

A physical property data bank for chemical engineering . DETHERM , a data bank for physical property data of chemical compounds and mixtures as required by chemical engineers is described, which allows the retrieval of literature data, the algebraic manipulation of retrieved data, data calculations and estimations, data analysis, and connection with data processing systems. In the data bank both numerical and non-numerical data are stored, data and substances being labeled by ?tags”? which characterize the kind of stored data and substances.     

Delayed self-heterodyne linewidth measurement of VCSELs

We report on high-resolution linewidth measurements of proton-implanted InGaAs-GaAs VCSELs employing the delayed self-heterodyne method. Devices with 16-/spl mu/m active diameter exhibit record low linewidths of 20 MHz and 4-MHz residual linewidth. The linewidth enhancement factor is accurately determined from the ratio of induced phase to amplitude modulation indexes.     

New concepts for lithium minerals processing

A new concept for the enrichment of lithium minerals is offering higher purity and higher yield by applying new processing technologies addressing the specific properties of the pegmatitic host rock. Additional value is created from high quality by-products which will improve the sustainability of mining activity and the overall cost base. Within the new concept, flotation may even be avoided where wet separation techniques are not applicable.Two innovative processing technologies have been integrated in the new concept: electrodynamic fragmentation and optical sorting. Detailed results of lab-technical tests show that the new process design can achieve highly selective liberation and separation processes. Optical and mineralogical analyses of the test products indicate a high benefit for commercial applications.     

Relative resistance of striatal neurons containing calbindin or parvalbumin to quinolinic acid-mediated excitotoxicity compared to other striatal neuron types

To evaluate the relative ability of those striatal neuron types containing calbindin or parvalbumin to withstand a Ca(2+)-mediated excitotoxic insult, we injected the NMDA receptor-specific excitotoxin quinolinic acid (QA) into the striatum in mature adult rats and 2 months later examined the relative survival of striatal interneurons rich in parvalbumin and striatal projection neurons rich in calbindin. To provide standardization to the survival of striatal neuron types thought to be poor in Ca2+ buffering proteins, the survival was compared to that of somatostatin-neuropeptide Y (SS/NPY)-containing interneurons and enkephalinergic projection neurons, which are devoid of or relatively poorer in such proteins. The various neuron types were identified by immunohistochemical labeling for these type-specific markers and their relative survival was compared at each of a series of increasing distances from the injection center. In brief, we found that parvalbuminergic, calbindinergic, and enkephalinergic neurons all showed a generally comparable gradient of neuronal loss, except just outside the lesion center, where calbindin-rich neurons showed significantly enhanced survival. In contrast, striatal SS/NPY interneurons were more vulnerable to QA than any of these three other types. These observed patterns of survival following intrastriatal QA injection suggest that calbindin and parvalbumin content does not by itself determine the vulnerability of striatal neurons to QA-mediated excitotoxicity in mature adult rats. For example, parvalbuminergic striatal interneurons were not impervious to QA, while cholinergic striatal interneurons are highly resistant and SS/NPY+ striatal interneurons are highly vulnerable. Both cholinergic and SS/NPY+ interneurons are devoid of any known calcium buffering protein. Similarly, calbindin does not prevent striatal projection neuron vulnerability to QA excitotoxicity. Nonetheless, our data do suggest that calbindin may offer striatal neurons some protection against moderate excitotoxic insults, and this may explain the reportedly slightly greater vulnerability of striatal neurons that are poor in calbindin to ischemia and Huntington's disease.