Room-temperature lasing operation of GaInNAs-GaAssingle-quantum-well laser diodes

We have succeeded in demonstrating continuous-wave (CW) operation of GaInNAs-GaAs single-quantum-well (SQW) laser diodes at room temperature (RT). The threshold current density was about 1.4 kA/cm², and the operating wavelength was approximately 1.18 μm for a broad-stripe geometry. Evenly spaced multiple longitudinal modes were clearly observed in the lasing spectrum. The full-angle-half-power far-field beam divergence measured parallel and perpendicular to the junction plane was 4.5° and 45°, respectively. A high characteristic temperature (T₀) of 126 K under CW operation and a small wavelength shift per ambient temperature change of 0.48 nm/°C under pulsed operation were obtained. These experimental results indicate the applicability of GaInNAs to long-wavelength laser diodes with excellent high-temperature performance     

Injection Molding Micro‐ and Nanostructures in Thermoplastic Elastomers

Flexible polymers such as poly dimethyl siloxane (PDMS) can be patterned at the micro‐ and nanoscale by casting, for a variety of applications. This replication‐based fabrication process is relatively cheap and fast, yet injection molding offers an even faster and cheaper alternative to PDMS casting, provided thermoplastic polymers with similar mechanical properties can be used. In this paper, a thermoplastic polyurethane is evaluated for its patterning ability with an aim to forming the type of flexible structures used to measure and modulate the contractile forces of cells in tissue engineering experiments. The successful replication of grating structures is demonstrated with feature sizes as low as 100 nm and an analysis of certain processing conditions that facilitate and enhance the accuracy of this replication is presented. The results are benchmarked against an optical storage media grade polycarbonate.

     

Small‐Scale Thermal Studies of Volatile Homemade Explosives

Several homemade or improvised explosive mixtures that either contained volatile components or produced volatile products were examined using standard small‐scale safety and thermal (SSST) testing that employed differential scanning calorimetry (DSC) techniques (constant heating rate and standard sample holders). KClO₃ and KClO₄ mixtures with dodecane exhibited different enthalpy behavior when using a vented sample holder in contrast to a sealed sample holder. The standard configuration produced profiles that exhibited only endothermic transitions. The sealed system produced profiles that exhibited additional exothermic transitions absent in the standard configuration produced profiles. When H₂O₂/fuel mixtures were examined, the volatilization of the peroxide (endothermic) dominated the profiles. When a sealed sample holder was used, the energetic releases of the mixture could be clearly observed. For AN and AN mixtures, the high temperature decomposition appears as an intense endothermic event. Using a nominally sealed sample holder also did not adequately contain the system. Only when a high‐pressure rated sample holder was used the high temperature decomposition of the AN could be detected as an exothermic release. The testing was conducted during a proficiency (or round‐robin type) test that included three U.S. Department of Energy and two U.S. Department of Defense laboratories. In the course of this proficiency test, certain HMEs exhibited thermal behavior that was not adequately accounted for by standard techniques. Further examination of this atypical behavior highlighted issues that may have not been recognized previously because some of these materials are not routinely tested. More importantly, if not recognized, the SSST testing results could lead to inaccurate safety assessments. This study provides examples, where standard techniques can be applied, and results can be obtained, but these results may be misleading in establishing thermal properties.     

From Pentagon to Heptagon: A Discovery on the Generation of the Regular Heptagon from the Equilateral Triangle and Pentagon

Geometer Marcus the Marinite presents a construction for the heptagon that is within an incredibly small percent deviation from the ideal. The relationship between the incircle and excircle of the regular pentagon is the key to this construction, and their ratio is 2 : ϕ. In other words, the golden section plays the critical role in the establishment of this extremely closeto-ideal heptagon construction.     

Effect of p-doping on the temperature dependence of differentialgain in FP and DFB 1.3-μm InGaAsP-InP multiple-quantum-well lasers

The temperature dependence of differential gain dG/dn for 1.3-μm InGaAsP-InP FP and DFB lasers with two profiles of p-doping was obtained from RIN measurements within the temperature range of 25°C-65°C. Experiments showed that the change of the active region doping level from 3·10¹⁷ cm^-3 to 3·10¹⁸ cm^-3 leads to a 50% increase of the differential gain for FP lasers at 25°C. Heavily doped devices also exhibit more rapid reduction of the differential gain with increasing temperature. The effect of active region doping on the energy separation between the electron Fermi level and electronic states coupled into the laser mode explains the observations. The temperature dependence of differential gain for DFB devices strongly depends on the detuning of the lasing wavelength from the gain peak     

EFFECT OF PREHYDROGENATION ON HYDROCONVERSION OF MAYA RESIDUUM, PART I: PROCESS CHARACTERIZATION

Maya 650°F residuum was mildly prehydrogenated over a standard, commercially available, hydrodesulfurization catalyst. The product was then distilled to yield hydrogenated Maya 650°F residuum. This prehydrogenated residuum, and the untreated Maya 650°F residuum were separately hydroprocessed further at different process severities. The resulting products were then examined by elemental analyses to determine the effects of die prehydrogenation step on overall conversion and product quality.

The primary effect of the prehydrogenation step was to increase the overall conversions for sulfur, MCR, nitrogen, and asphaltenes. As a result, the hydro-conversion products derived from the prehydrogenation were substantially better quality than the corresponding direct hydroconversion products. The prehydrogenation step also lowered the severity required for equivalent residuum hydroconversion upgrading.     

Individual variation for cognitive decline: Quantitative methods for describing patterns of change.

What are the best quantitative methods for studying cognitive decline? This question was investigated in a sample of 638 individuals aged 50 years and older from the Swedish Adoption/Twin Study of Aging. A battery of cognitive tests tapping multiple domains was administered to each individual from 2 to 7 times over a span of 10 years. Four methods of operationalizing cognitive decline were compared: change scores, a criterion-based method, least squares, and random effects regression (RER). The RER results were most consistent with a significant decline across measures and differences between demented and nondemented individuals. Predicted slopes from the RER model also showed the strongest interrelationships within and across cognitive domains as indicated by factor analysis results and stronger associations with demographic, health, and psychosocial predictors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Signalling regions: Multiprocessing in a shared memory reconsidered

The goal of this paper is to return attention to two problems that arise in the context of supporting the monitor as a mechanism for concurrent programming. This paper will re-examine the monitor concept in its original context—a multiprocessing environment implemented on a single processor sharing memory with and being interrupted by asynchronous peripheral devices—and will address the two previously unresolved problems. The first is the conflict between the immediate resumption requirement in explicit signalling and the policies and priorities of the process scheduler. The second is the possibility of deadlock inherent in nested monitors and in its most important instance, the dynamic resource allocation problem. After briefly describing the historical context of these two problems, the paper proposes a language structure called a signalling region that together with the notion of encapsulation by modules solves the immediate resumption problem and avoids the nested monitor problem. The former is done by a combination of the signal-and-return semantics of Concurrent Pascal and the signal-and-continue semantics of Mesa and StarMod. The latter is done by suggesting that mutual exclusion and data encapsulation are distinct concepts that, if separated, make nested encapsulation possible while avoiding the problems of nested mutual exclusion. Classical examples of the use of signalling regions in an extended Modula-2 are given as well as an implementation by translation to unextended Modula-2 together with a Kernel module.     

The elusive professionalism of school psychology: Lessons from the past, portents for the future.

Comments on T. D. Oakland's (see record 1987-13985-001) article on professionalism in school psychology and presents an alternative view through a discussion of the empirical basis of practice and the view of school psychologists as professionals vs technicians. The development of professional standards documents specifically pertaining to school psychology and the more direct involvement of the American Psychological Association in school psychology specifically give a more professional air to the discipline. However, it is asserted that professionalism must be assessed on the basis of the day-to-day behavior of school psychologists. (9 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

CHARACTERIZATION OF HEAVY RESIDUA BY APPLICATION OF A MODIFIED D 2007 AND ASPHALTENE SEPARATION: EFFECT OF SOLVENTS ON PHYSICAL AND CHEMICAL PROPERTIES OF FRACTIONS DERIVED FROM HONDO 850°F RESIDOOM

Hondo 850 ^°F residuum was separated into saturate, aromatic, resin, and asphaltene fractions by a modified D 2007 and asphaltene separation. Two different asphaltene precipitation solvents were used — isooctane and heptane — and differences in selected physical and chemical properties of the derived fractions were compared.

The principal difference in the use of the two solvents was weight recovery after the separation. Isooctane yielded good recovery, while heptane exhibited poor recovery. Isooctane precipitated substantially more asphaltenes, as predicted from the solubility parameters of the two solvents.

The metals concentrations in the fractions were comparable for each solvent — no metals in the saturate and aromatic fractions, approximately 300 and 1500 ppm Ni + V in the resin and asphaltene fractions respectively. The relative distribution was also similar for both solvents, with the highest percentage coming from the asphaltenes.