Development of bakery products for greater adult consumption based on wheat and rice flour

The present investigation was developed as a contribution to Guatemalan's elderly food and nutrition. Its main objective was to evaluate the chemical, nutritional and sensory quality of bread prepared from the partial substitution of wheat flour with rice flour. Wheat flour substitutions with rice flour in the order of 15, 20, 30, 40, 50 and 60% were evaluated. Differences with the control (100% wheat bread) were found during the process of preparation, as well as texture, volume, height, weight and specific volume. Important effects in dough handling were noted specifically in the 40, 50 and 60% rice bread. Thus, a sandy texture was found in breads of higher rice levels. The bread protein quality increased with the level of substitution; however the protein quality difference between the wheat bread and the bread with 60% rice flour did not achieve statistical significance. Based on a statistical analysis of the physical properties the bread with 30 and 40% rice flour was selected, and through a preference test between these last two, the 30% rice flour bread was selected as the sample best suited to the present study's purposes. This bread was not different to wheat bread in many nutritional parameters, although in others it showed to be superior. Each serving size of bread has a weight of 80 grams (2 slices) that contributes adequate quantity of calories, protein and sodium, although a little less dietary fiber than 100% wheat bread.     

Biodiesel Production by Enzymatic Catalysis Process Using Two Analytical Ways： Gas Chromatography and Total Glycerol Determination

Currently, biodiesel is presented as one of the best alternatives for gradually replacing the use of fossil fuels, but it has some factors that make it economically impractical if it does not have a government support. For this reason, research efforts focused on this area have been responsible for optimizing the process of biodiesel production by different catalytic routes to achieve greater efficiency at a lower cost. In this case, the biggest problem has been the high cost generated by an investigation, which in many occasions is the main factor to decide if an investigation could be carried out. Trying to reduce these costs, in the current study, we are using a technique of glycerol quantification by volumetric methods and comparing obtained results with the chromatographic method, which is conventionally used and comparatively much more expensive. Biodiesel employee was obtained by an enzymatic catalysis process varying one of three process variables：oil：alcohol molar ratio, temperature and proportion of catalyst. The numerical differences obtained between the two quantification methods generated relative errors lower than 10%, resulting in some occasions lower than 1%. By gas chromatography analysis the best yield was obtained at the same conditions of the volumetric method, a temperature of 45 ℃, an oil：alcohol ratio 1：4 and 8 wt.% of catalyst, but a yield of 95.5% and 97.1%, respectively. Due to the high precision of gas chromatography, this method is used to carry out a surface response analysis obtaining as ideal operating conditions a temperature of 43.5 ℃, 8.9 wt.%. of catalyst and an oil：alcohol ratio 1：4.     

Flow boiling in horizontal flattened tubes: Part I – Two-phase frictional pressure drop results and model

Experiments of diabatic two-phase pressure drops in flow boiling were conducted in four horizontal flattened smooth copper tubes with two different heights of 2 and 3 mm. The equivalent diameters of the flat tubes are 8.6, 7.17, 6.25, and 5.3 mm. The working fluids are R22 and R410A, respectively. The test conditions are: mass velocities from 150 to 500 kg/m² s, heat fluxes from 6 to 40 kW/m² and saturation temperature of 5 °C (reduced pressures p_r are 0.12 for R22 and 0.19 for R410A). The experimental results of two-phase pressure drops are presented and analyzed. Furthermore, the predicted two-phase frictional pressure drops by the flow pattern based two-phase pressure drop model of Moreno Quibén and Thome [J. Moreno Quibén, J.R. Thome, Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part I: Diabatic and adiabatic experimental study, Int. J. Heat Fluid Flow 28 (2007) 1049–1059; J. Moreno Quibén, J.R. Thome, Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part II: New phenomenological model, Int. J. Heat Fluid Flow 28 (2007) 1060–1072] using the equivalent diameters were compared to the experimental data. The model, however, underpredicts the flattened tube two-phase frictional pressure drop data. Therefore, correction to the annular flow friction factor was proposed for the flattened tubes and now the method predicts 83.7% of the flattened tube pressure drop data within ±30%. The model is applicable to the flattened tubes in the test condition range in the present study. Extension of the model to other conditions should be verified with experimental data.     

An integrated approach for optimal coordination of wind power and hydro pumping storage

The increasing wind power penetration in power systems represents a techno‐economic challenge for power producers and system operators. Because of the variability and uncertainty of wind power, system operators require new solutions to increase the controllability of wind farm output. On the other hand, producers that include wind farms in their portfolio need to find new ways to boost their profits in electricity markets. This can be done by optimizing the combination of wind farms and storage so as to make larger profits when selling power (trading) and reduce penalties from imbalances in the operation. The present work describes a new integrated approach for analysing wind‐storage solutions that make use of probabilistic forecasts and optimization techniques to aid decision making on operating such systems. The approach includes a set of three complementary functions suitable for use in current systems. A real‐life system is studied, comprising two wind farms and a large hydro station with pumping capacity. Economic profits and better operational features can be obtained from the proposed cooperation between the wind farms and storage. The revenues are function of the type of hydro storage used and the market characteristics, and several options are compared in this study. The results show that the use of a storage device can lead to a significant increase in revenue, up to 11% (2010 data, Iberian market). Also, the coordinated action improves the operational features of the integrated system. Copyright © 2013 John Wiley & Sons, Ltd.     

Energetic contribution potential of building-integrated photovoltaics on airports in warm climates

Especially in warm climates, a considerable fraction of the electricity demand in commercial buildings is due to the intensive use of air-conditioning systems. Airport buildings in sunny and warm regions present a perfect match between energy demand and solar resource availability. Airport buildings are also typically large and horizontal, isolated and free of shading, and have a great potential for the integration of solar photovoltaic (PV) systems. In this work, we assess the potential impact in energy demand reduction at the Florianopolis International Airport in Brazil (27°S, 48°W) with the use of building-integrated photovoltaic (BIPV) systems. We analyse the building’s hourly energy consumption and solar irradiation data, to assess the match between energy demand and potential generation, and we estimate the PV power necessary to supply both the total amount and fractions of the annual energy demand. Our results show that the integration of PV systems on airport buildings in warm climates can supply the entire electric power consumption of an airport complex, in line with the general concept of a zero-energy building (ZEB).     

Parameters effect on proton conductivity to obtain chitosan membranes for use as electrolytes in PEMFC

The chitosan biopolymer can be used as a proton‐conducting membrane in proton‐exchange membrane fuel cell. In the forms that they have normally obtained and tested, chitosan membranes typically show poor performance in conduction of protons, requiring modifications in the structure of the biopolymer or blending with other polymers to increase its proton conductivity. The present work investigates the individual properties of chitosan and relates them to the proton conductivity performance of membranes composed of this polymer. Evaluation was made of the effects of variables such as the degree of deacetylation (DD) and the molar mass (Mv) of chitosan membranes without addition of any other polymer. The DD and Mv values of the chitosan used to produce membranes determined the proton conduction, with lower DD and higher Mv resulting in higher conductivity. The thicker membranes presented greater crystallinity, with conductivity between 2.0 × 10^?4 and 1.8 × 10^?3 S cm^?1. The characteristic stages of degradation of the chitosan membranes were in the ranges 200 to 300°C and 500 to 600°C, indicating good thermal stability of the material.     

Implementation of energy efficiency measures in compressed air systems: barriers,drivers and non-energy benefits

Increased global competition and resource scarcity drives industrial companies to cut costs. Energy can be a significant component of such cuts, particularly for energy-intensive companies. Improving energy efficiency in industry is complex, as it pertains to various energy-using processes that are heavily intertwined. One such process is the compressed air system (CAS), which is used in most industrial companies worldwide. Since energy efficiency improvement measures for various types of energy-using processes differ, technology-specific measures might encounter different barriers to and drivers for energy efficiency. The same applies to the non-energy benefits (NEBs) related to energy efficiency improvement measures; since measures vary between various energy-using processes, the perceived NEBs might be different as well. The aim of this paper is to study the barriers to, drivers for and NEBs of CAS energy efficiency improvement measures from the perspectives of three actors. Carried out as an interview study combined with a questionnaire, the paper merges the perspectives of users, audit experts and suppliers of CASs. The results showed that the major barriers are related to the investment, or are of an organisational character, and that organisational and economic factors seemed to be important for making positive decisions on energy efficiency investments and measures in CASs. Major NEBs for CASs include productivity gains and the avoidance of capital expenditures. The results of this study also address the importance of having a comprehensive approach to recognise additional effects of energy efficiency improvements in CASs.     

The application of the multiple transient technique for the experimental determination of the relative abundances and decay constants of delayed neutrons of the IPEN/MB-01 reactor

An in-pile experiment for the determination of the relative abundances and decay constants of delayed neutrons has been successfully performed at the IPEN/MB-01 research reactor facility. The experimental data are of good quality and can be used to validate theoretical predictions of the delayed neutron group constants based on the current knowledge of the fission products yields and emission probabilities for known precursors. The theory/experiment comparison shows that the current release of ENDF/B-VI, namely release 8, shows severe discrepancies in both relative abundances and in its first decay constant. The version revised at LANL shows very good progress in both aspects. JENDL3.3 shows the best performance in the C/E comparison. One of the main achievements of the experiment was the consistency of the measured first decay constant to that of ⁸⁷Br. Finally, it is also shown preliminary experimental results for an eight-group model.     

Distributed Control Strategy with Smith's Predictor in a Pilot-Scale Diabatic Distillation Unit

Intrinsic characteristics of distillation such as dead time and high nonlinearities do not allow the complete elimination of transient times when any external disturbance or set-point change occurs. Thus, aiming at the use of easy-tuning systems, a distributed-action control in trays of a diabatic distillation unit with Smith's predictor was implemented in the Simulink environment to further reduce transient times and out-of-specification product. The distributed-action strategy with Smith's predictor led to a reduction of 33.3 min (33 %) in the transient time of the top temperature control loop and 66 % in out-of-specification product, when compared with the conventional strategy, and thus is shown to be an efficient approach to increasing the productivity of distillation plants.     

ACE2, the Receptor that Enables Infection by SARS-CoV-2: Biochemistry,Structure, Allostery and Evaluation of the Potential Development of ACE2 Modulators

Angiotensin converting enzyme 2 (ACE2) is the human receptor that interacts with the spike protein of coronaviruses, including the one that produced the 2020 coronavirus pandemic (COVID-19). Thus, ACE2 is a potential target for drugs that disrupt the interaction of human cells with SARS-CoV-2 to abolish infection. There is also interest in drugs that inhibit or activate ACE2, that is, for cardiovascular disorders or colitis. Compounds binding at alternative sites could allosterically affect the interaction with the spike protein. Herein, we review biochemical, chemical biology, and structural information on ACE2, including the recent cryoEM structures of full-length ACE2. We conclude that ACE2 is very dynamic and that allosteric drugs could be developed to target ACE2. At the time of the 2020 pandemic, we suggest that available ACE2 inhibitors or activators in advanced development should be tested for their ability to allosterically displace the interaction between ACE2 and the spike protein.