Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

This paper presents novel opportunities for management of fly ash by synthesizing the material into cordierite ceramics and using it as a reinforcing phase for light metal alloys. Metal matrix composites (based on magnesium alloy and aluminum alloy) were produced by squeeze casting. The magnesium matrix composites with a suitably selected reinforcing phase content (2 wt.%) exhibited much better strength properties than the unmodified alloy (AM60). It was also demonstrated that the wettability (or the lack thereof) in the metal-ceramic system is critical to successful production of the composites based on the AK7 alloy with cordierite. Light alloy matrix composites reinforced with cordierite ceramics particles are innovative materials that combine high strength with low weight, which may be a key factor of merit for numerous applications of the composite in various branches of industries.     

Thermochemical Treatment--Technologies for Recovery and Utilisation of Materials

The arc furnace technology is an ideally suited process for the treatment of hazardous and problematic waste. The operation conditions of the arc furnace can be adapted for optimal transformation of the waste material input into raw materials and usable products. The process can significantly reduce the impact of contaminated wastes and industrial residues, and enable material conversion and separation. Thus, the products of the process have various applications. The capability of the process is illustrated with three examples, the treatment of bottom ash and filter ash from waste incineration plants, of stainless steel slags and of chromium containing residues from the refractory industry.     

Composition of a protein-like fluorophore of dissolved organic matter in coastal wetland and estuarine ecosystems

This study demonstrates the compositional heterogeneity of a protein-like fluorescence emission signal (T-peak; excitation/emission maximum at 280/325 nm) of dissolved organic matter (DOM) samples collected from subtropical river and estuarine environments. Natural water samples were collected from the Florida Coastal Everglades ecosystem. The samples were ultrafiltered and excitation-emission fluorescence matrices were obtained. The T-peak intensity correlated positively with N concentration of the ultrafiltered DOM solution (UDON), although, the low correlation coefficient (r(2)=0.140, p<0.05) suggested the coexistence of proteins with other classes of compounds in the T-peak. As such, the T-peak was unbundled on size exclusion chromatography. The elution curves showed that the T-peak was composed of two compounds with distinct molecular weights (MW) with nominal MWs of about >5 x 10(4) (T(1)) and approximately 7.6 x 10(3) (T(2)) and with varying relative abundance among samples. The T(1)-peak intensity correlated strongly with [UDON] (r(2)=0.516, p<0.001), while T(2)-peak did not, which suggested that the T-peak is composed of a mixture of compounds with different chemical structures and ecological roles, namely proteinaceous materials and presumably phenolic moieties in humic-like substances. Natural source of the latter may include polyphenols leached from senescent plant materials, which are important precursors of humic substances. This idea is supported by the fact that polyphenols, such as gallic acid, an important constituent of hydrolysable tannins, and condensed tannins extracted from red mangrove (Rhizophora mangle) leaves exhibited the fluorescence peak in the close vicinity of the T-peak (260/346 and 275/313 nm, respectively). Based on this study the application of the T-peak as a proxy for [DON] in natural waters may have limitations in coastal zones with significant terrestrial DOM input.     

Friction stir welding of API X70 steel incorporating Ti-dioxide

In the present work, the microstructural evolution and hardness of HSLA X70 joined by friction stir welding were investigated. The FSW was applied to HSLA X70 with and without the addition of titanium dioxide (TiO₂) powders. To evaluate the microstructural features and hardness of different weld zones, optical microscopy and Vickers microhardness measurements were applied. The results show that the distribution of TiO₂ powders is strongly dependent on the applied friction stir processing, which in turn changed significantly the microstructure and hardness profile. In this regard, the optimum stirring action resulted in a homogeneous and fine dispersion of particles leading to the domination of an acicular ferrite phase with a hardness of 370 HV. On the other hand, the lower stirring action resulted in coarse particles as well as the development of the polygonal ferrite structure with a hardness of ～185 HV.