感知风险对大学生网购服装满意度的影响

针对网购感知风险对大学生网购服装满意度影响关系,通过文献分析将网购感知风险要因划分为经济风险、性能风险、社会心理风险、隐私风险和时间风险5个下位要因,同时将满意度要因划分为产品满意度和使用满意度,在此基础上设定研究假设模型、编制问卷并展开调研.SPSS信度检验表明,感知风险的信度为0.812～0.898,满意度的信度为0.859～0.871.SPSS因子探索性分析结果表明:性能风险对感知风险的贡献率最大,为3.312;产品满足对满意度的贡献率最大,为2.232.AMOS验证表明:经济风险对产品满足的路径系数为0.22,关系显著;性能风险对满意度路径系数分别为0.68、0.81,关系显著;时间风险对满意度路径系数分别为0.20、0.51,关系显著;隐私风险对满意度路径系数分别为0.25、0.19,关系显著;其他假设关系不显著.研究结果可以为服装网购商城运营者提供顾客管理、产品构成和营销战略等参考.     

Variable step-size affine projection algorithm based on global speech absence probability for adaptive feedbackcancellation简

A novel approach is proposed for improving adaptive feedback cancellation using a variable step-size affine projection algorithm（VSS-APA） based on global speech absence probability（GSAP）.The variable step-size of the proposed VSS-APA is adjusted according to the GSAP of the current frame.The weight vector of the adaptive filter is updated by the probability of the speech absence.The performance measure of acoustic feedback cancellation is evaluated using normalized misalignment.Experimental results demonstrate that the proposed approach has better performance than the normalized least mean square（NLMS） and the constant step-size affine projection algorithms.     

鼓泡床内气泡-液体两相湍流代数应力模型的数值模拟

现有的气泡 -液体两相流动的数值模拟中 ,或者不考虑湍流 ,或者仅仅考虑液体湍流 ,但是直接模拟和PIV测量结果都表明气泡由于尾迹的作用有强烈的湍流脉动 .本文首次推导和封闭了同时模拟气泡湍流脉动和液体湍流脉动的二阶矩输运方程两相湍流模型 ,并在此基础上建立了代数应力气泡 -液体两相湍流模型 .用代数应力模型模拟了二维矩形断面鼓泡床内气泡 -液体两相流动 .预报结果给出了气泡和液体两相速度场、两相Reynolds应力及湍动能分布和气泡体积分数分布 .模拟结果与PIV测量结果符合很好 ,表明了模型的合理性 .研究结果表明 ,原先静止的液体在气泡因浮力而产生的上升运动的作用下产生回流流动 ,而气泡则只有上升运动 .气泡速度始终大于液体速度 .在床内气泡湍流脉动确实始终很强烈 .液体则由于气泡的作用以及自身速度梯度产生的双重作用而发生湍流脉动 .气泡的脉动显著地大于液体的脉动 .两相湍流脉动都是各向异性的 ,而且气泡湍流脉动的各向异性比液体的更强烈     

回转窑轮带在受接触力时的非线性有限元仿真

用有限元非线性分析方法，建立回转窑轮带和托轮接触有限元分析模型；并通过编程计算出轮带和托轮的最佳接触刚度；通过仿真，可绘出整个轮带的应力分布图和变形图。与理论算法比较，此方法所得结果更直接，观察结果更方便，且与理论结果很相近。     

MODELING OF COPPER ION REMOVAL FROM AQUEOUS SOLUTIONS USING MODIFIED SILICA BEADS

Silica beads, containing 2-hydroxy-5-nonylacetophenoneoximc (LIX84) were prepared in order to examine the removal of copper ions from aqueous waste solutions. The process for copper ion removal using the modified silica beads was mathematically modeled using both a non-equilibrium model and an equilibrium model. The external mass transfer coefficient and effective diffusivity inside the bead pore were estimated by matching the experimental data and predicted values from the model, and the results were compared. The results of the two models were similar and in good agreement because of the relatively faster reaction rate than mass transfer rate. Sensitivity analyses showed that the external mass transfer has more influence on the copper ion removal system because of hydrophobic effects.     

不同形态白炭黑对胎面胶性能的影响

通过选用不同形态的白炭黑,来研究其在同一个胎面胶中的硫化特性和物理机械性能。研究表明,其对胶料的性能影响不大,只是粉末状样品由于颗粒较小,比重较轻,较易产生粉尘较易飞扬,在密炼过程中容易对环境造成污染以及给工人身心健康带来负面影响。故在生产过程中,即使在成本小量增加的前提下也应该选用颗粒状等较不易产生粉尘的白炭黑来使用,以免对员工健康造成危害。     

Effective parameters on diameter of carbon nanotubes by plasma enhanced chemical vapor deposition

The effective parameters on the diameter of carbon nanotubes (CNTs) by plasma enhanced chemical vapor deposition (PECVD) were presented.Among lots of influential parameters,the effects of the catalytic film thickness and the pretreatment plasma power on the growth of CNTs were investigated.The results show that the size of catalytic islands increases by increasing the thickness of catalytic layer,but the density of CNTs decreases.The pretreatment duration time of 30 s is the optimal condition for growing CNTs with about 50 nm in diameter.By increasing the pretreatment plasma power,the diameter of CNTs decreases gradually.However,the diameter of CNTs does not change drastically from 80 to 120 W.The uniformly grown CNTs with the diameter of 50 nm are obtained at the pretreatment plasma power of 100 W.     

Reactive wetting phenomena of MgO-C refractories in contact with CaO-SiO2 slag

Wetting phenomena between MgO C and CaO SiO2 slags were investigated by varying carbon content.A sessile drop technique was adopted to study the wetting phenomena in conjunction with a high speed camera for the observation of intrinsic wetting phenomena.The results show that the high content of SiO2 and the presence of Al2O3 in slags enhance the diffusion of Mg2+,leading to the promotion of reactive wetting.The carbon in MgO C refractory impedes the penetration of slags by repelling the slag and slowing the diffusion of Mg2+.This accounts for the non-wetting behavior of the slag on MgO C refractory with 17% (mass fraction) carbon similar to that of graphite.     

Friction stir butt welding of A5052-O aluminum alloy plates

Friction stir butt welding (FSW) between A5052-O aluminum alloy plates with a thickness of 2 mm was performed.The rotation speeds of the welding tool were 2000 and 3000 r/min,respectively.The traverse speed was ranged from 100 mm/min to 900 mm/min.The defect-free welds with the very smooth surface morphology were successfully obtained,except for at the welding condition of 3000 r/min and 100 mm/min.The onion ring structure was observed in the friction-stir-welded zone (SZ) at the condition of 2000 r/min and 100 mm/min.For all the welding conditions,the grain size of the SZ was smaller than that of the base metal,and was decreased with the decrease of the tool rotation speed and with the increase of the tool traverse speed.The stir zone exhibited higher average hardness than the base metal.The decrease of the tool rotation speed and the increase of the tool traverse speed resulted in the increase in the average hardness of the SZ.The tensile strength of the FSWed plates was similar to that of the base metal,except for at the welding condition of 3000 r/min and 100 mm/min.The total elongation of the FSWed plates was lower than that of the base metal.     

HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3-Al2O3 system

The crystallization process of the eutectic composition of GdAlO_3-Al_2O_3 from the amorphous phase prepared by rapid-quenching of melt that leads to the formation of a cantaloupe skin-like microstructure was investigated using focused ion-beam scanning electron microscopy (FIB-SEM) and high-resolution transmission electron microscopy (HR-TEM).The amorphous films were heat-treated at temperatures between 1000 °C and 1500 °C for up to 30min to form the eutectic phases of GdAlO_3 and Al_2O_3.The GdAlO_3 and Al_2O_3 crystal phases that formed from the amorphous phase were identified by FIB-SEM and HR-TEM.Both components began to crystallize and grow from the amorphous phase separately at different temperatures.The formation process of these crystal phases was different from that of the ordinary eutectic microstructure solidified from the GdAlO_3-Al_2O_3 system.Therefore,the observed structure is termed eutectic-like for distinction.The microstructures formed from the amorphous phases at sufficiently high temperatures consisted of ultra-fine microstructures of individually crystallized components and were similar to ordinary eutectic microstructures.By heat-treating the amorphous films at 1500 °C for either 2 min,8min or 30min,the ultra-fine components of GdAlO_3 and Al_2O_3 were found to crystallize following a eutectic-like stage after 8min of heat treatment.