Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

An Investigation of Vibration Reducing on a Machine Tool

In order to reduce the vibration on a machine tool, more orthogonal experiment schemes have been designed, which are based on the steel balls vibration reducing principle. After experiments the optimal reducing vibration scheme was determined. This kind of vibration reducing scheme is used in steel balls vibration absorber, which can be used to reduce vibration magnitudes of a machine tools under the working conditions, whereby improving machining precision. The suggested experiment method is of useful reference in reducing vibrations on other machine tools too.     

蒸发氧化法制备高品质活性氧化镉粉末

开发了高品质活性氧化镉粉末的制备工艺，系统地探索了工艺条件对氧化镉电池材料电化性能的影响。对样品进行了物化性能及电性能检测，结果表明，采用蒸发氧化法可制备出镍镉充电电池用高品质活性氧化镉粉末。     

High Gd Concentration GaGdN Grown at Low Temperatures

GaGdN layers were grown at temperatures below 300°C by radio-frequency plasma-assisted molecular beam epitaxy on sapphire substrates. GaGdN samples with high Gd concentration as high as 12.5% were obtained by lowering the growth temperature. X-ray diffraction results showed no obvious secondary phase, which means that the phase separation can be suppressed by the growth at low temperatures. All samples, including those grown at room temperature, showed ferromagnetic characteristics. Photoluminescence emission was observed, though spectra exhibit broad and sharp luminescence bands related to many kinds of defects. It is suggested that electrons coming from defects, especially, nitrogen vacancy, stabilize ferromagnetism, and that the carrier-induced ferromagnetism occurs in the low-temperature-growth GaGdN.     

牵引一制动型液力变矩器原始特性研究

 基于束流理论建立了牵引一制动型液力变矩器原始特性参数计算数学模型．对以D430型液力变矩器为原
型设计的牵引一制动型液力变矩器进行了原始特性参数计算，并将计算结果同D430型液力变矩器原始特性参数进
行了比较分析，结论合理． 对设计牵引一制动型液力变矩器具有一定的指导意义．     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

三种套管接头抗压缩性能研究

针对套管接头抗压缩强度问题，使用全尺寸实物试验的方法对几种不同钢级、不同螺纹形式的套管接头的抗压缩强度进行了对比试验，并借助材料力学和有限元方法对试验结果进行了分析。实物试验中出现了管体失稳和接箍跳扣两种套管接头压缩失效形式。试验结果和分析结果表明，N80、P110钢级材料的压缩屈服强度高于拉伸屈服强度；偏梯形螺纹套管接头的压缩屈服强度比同钢级、同壁厚特殊扣螺纹套管接头低6.7%～7.7%；上扣是否到位，直接影响套管接头部分的抗压缩能力，上扣不到位的特殊螺纹套管接头的抗压缩性能甚至低于偏梯形螺纹接头。同时指出，为了保证上扣质量，不应使用浮动上扣方法，管柱设计中应进行抗压缩强度设计。     

红外多元探测器的噪声仿真研究

分析了红外多元探测器的噪声来源，建立各种噪声的公式。并以“L”型探测器为例分析其噪声的信号形式有三种：白噪声、正弦噪声、分形噪声。采用MATLAB语言对分析结果进行了仿真。     

关于气井产能、气田稳产特征和气区开采潜力的探讨

根据气田开发特点和国内外开发实践，对气田平均产能评价方法、开发速度与稳产的关系以及气区开采潜力等问题进行了探讨，以提高开发评价、开发建设及投资决策的科学性与可靠性，达到高效开发和稳定供气的目的。分析评价了国内外常用的6种气井产能评价方法，指出了其适用条件。利用中国、土库曼斯坦和俄罗斯部分开发历史较长的气田开发实例分析了开发速度与稳产的关系，结果表明四川裂缝系统稳产情况最好，而土库曼斯坦气田稳产关系最差。利用俄罗斯已枯竭老气区、正在开发的大型主力气区以及中国四川开采历史较长气区的开发实例，对气区开采潜力进行综合分析和探讨，认为在预测气田（或气区）的开发潜力、稳定供气水平和年限时，要全面评价、预计尚未探明储量的规模、质量、投产时间、投产顺序以及储量的可信度和可靠性，以降低开发决策的风险，提高中、长期开发规划的科学性。图5表2参10     

浅谈我国电信企业信息化策略

我国电信企业要做大做强，信息化是必然的战略选择和有效的助力器。本文阐述了电信企业信息化的含义、现状，描绘了电信企业信息化的目标，从经济学、管理学、行为科学等学科的角度提出了我国电信企业信息化策略。