Synthesis of highly efficient,structurally improved Li4SiO4 sorbents for high-temperature CO2 capture

Li₄SiO₄ sorbents for high-temperature CO₂ removal have drawn extensive attention owing to their potential application in carbon capture and storage (CCS). The major challenge in the application lies in the poor CO₂ capture performance under realistic conditions of low CO₂ concentrations, owing to the dense structure and poor porosity. In this work, Li₄SiO₄ sorbents were prepared with porous micromorphologies and large contact areas using a variety of organometallic Li-precursors, achieving fast CO₂ sorption kinetics, high capacity and excellent cyclic stability at a low CO₂ concentration (15?vol%). It was found that a high conversion of ~?74% was maintained for pure Li₄SiO₄ even after 100 sorption/desorption cycles. Moreover, by doping with Na₂CO₃ to reduce the CO₂ diffusion resistance, the conversion of the sorbent was further enhanced to 93.2%. The enhancement mechanism of alkali carbonate have been proven here to be ascribed to the formation of the eutectic melt of Li/Na carbonates, the existence and function of which has been confirmed in this study.     

IDS告警融合与关联模型的研究

入侵检测是保障网络安全的重要手段,针对现有入侵检测系统中告警数量多、协调性差等问题,论文提出了一种具有告警融合与关联功能的告警处理系统模型,该模型冗余告警量少、整体检测能力强,并能进行攻击企图的预测,能有效提高入侵检测的效率,有助于进一步增强网络的健壮性。     

高温高盐高含水油藏提高水驱采收率配套技术

针对江汉油区高温高盐高含水油藏的储层条件,应用国内外油藏精细描述、油藏工程最新理论与技术,提出了高含水油田合理钻加密井、完善注采井网、水平井挖潜、不稳定注水及高温高盐油藏采油工艺配套技术措施,形成了一套适应高温高盐高含水油藏提高水驱采收率的配套技术。     

扭臂式静电微驱动器的pulli-n现象分析

从扭臂式微驱动器模型出发,分析了器件在静电驱动条件下pulli-n现象的产生条件,并给出公式化结果。讨论了器件的几何结构参数对于pulli-n现象的影响,并对具体结构的器件给出了pulli-n角度和pulli-n电压等方面的分析结果。对于特定的扭臂结构,pulli-n角度为悬臂梁最大扭转角度的44.04%,且与扭臂的结构参数无关。     

Growth Defects in Langasite Crystals Observed with White Beam Synchrotron Radiation Topography

Langasite single crystal was grown by the Czochralski method and its perfection was assessed by white beam synchrotron radiation topography. It is found that the growth core and the growth striations are the primary growth defects and they show strong X-ray kinematical contrast in the topographs. Another typical defect in LGS crystal is dislocation. The formation mechanisms of these growth defects in LGS crystals were discussed.     

人工颅骨用复合材料中微量甲基丙烯酸甲酯的气相色谱法测定

采用氢气焰离子化检测器(FID),以正丁醇为外标物,PEG-20M为固定相,甲醇作为溶剂,气相色谱法测定复合材料人工颅骨中微量MMA的含量。其相对标准偏差<0.022,平均回收率(n=4)为98.0％～99.1％。此方法操作简便,用于实际样品分析可得到满意的结果。     

DS90C363/DS90CF364 LVDS发送/接收器在数字RGB液晶屏上的应用

通过在FPD铁路上使用LVDS技术可使具有数字RGB接口的液晶显示屏的工作距离大大增加。文章通过一个具体应用环境介绍了21位LVDS发送器/接收器DS90C363/DS90CF364传输套片的主要特性、引脚功能、工作原理，同时指出了在具体设计使用时的注意事项。     

基于ASP.NET技术的新闻发布系统的设计与实现

完整描述了一种在部队师旅级单位通用的新闻发布系统。首先根据用户的特点,对系统进行了需求分析与功能模块划分,然后在此基础上从系统架构、系统流程和数据库设计等3个方面阐述了系统设计中的关键点,并以设计用户登录界面为例写出了部分功能的实现程序,最后对其在中小型企业建站中的应用进行了展望。     

纳米AlN粉末的制备与烧结

利用低温燃烧合成前驱物制备出平均粒度为100 nm的AlN陶瓷粉末,比较了该粉末的常压烧结和放电等离子烧结的特性.实验表明:以合成的AlN粉末为原料,添加5%(质量比)Y2O3作为烧结助剂,在常压、流动N2气氛下1600℃保温3 h,制备出平均晶粒尺寸为4～8 μm、密度为3.28 g·cm-3的AlN陶瓷;将同样的粉末不加任何烧结助剂,采用SPS技术在1600℃保温4 min,得到密度为3.26 g·cm-3的AlN陶瓷,晶粒度约为1～2μm.     

一种压力容器设计的优化方法

当压力容器内体积一定时,利用给出的内体积公式,在一定范围内改变壳体内径及筒体长度(筒体与两封头焊缝间距离),按照GB 150-1998《钢制压力容器》有关规定可得到壳体壁厚一定但内径和筒体长度不同时相应的壳体质量。根据壳体质量的大小并综合考虑其它因素,是选择最佳设计方案的有效途径。