Recovery and partial purification of thermophilic β-xylosidase derived from recombinant Bacillus megaterium MS941 by aqueous two-phase system

A polymer–salt-based aqueous two-phase system (ATPS) was developed for the effective extraction and purification of extracellular β-xylosidase from the fermentation broth of recombinant Bacillus megaterium MS941. The effect of molecular weight (MW) of polyethylene glycol (PEG), tie-line length (TLL), volume ratio (V_R), crude loading and pH on the recovery performance was evaluated. Under the optimal extraction conditions, β-xylosidase was successfully purified up to 23-fold with a recovery yield of 99% in the bottom salt-rich phase at PEG 4,000/potassium phosphate ATPS comprising TLL of 41.8, V_R of 2.3, crude loading (C_L) of 30% (w/w) at pH 6.     

Computer Vision System (CVS) for In-Line Monitoring of Visual Texture Kinetics During Shrimp (Penaeus Spp.) Drying

In this study, the effects of drying medium temperature and velocity were surveyed on the image texture features of shrimp (Penaeus spp.) batches in a dryer equipped with a perpendicular dual-view computer vision system (CVS). This was carried out by applying an innovative rotation- and scale-invariant image texture processing approach with the capability of eliminating the effects of sample shrinkage on the visual textural features. Moreover, the variations in image texture parameters were investigated with moisture ratio, color, and geometrical characteristics of the shrimp samples. Drying experiments were conducted at hot air drying (HAD) temperatures of 50–90°C and superheated steam drying (SSD) temperatures of 110–120°C with drying medium velocities of 1–2 m/s. Several configurations of a multilayer perceptron artificial neural network (MLP-ANN) were also used to predict the moisture ratio and the geometrical characteristics of the shrimp batch using the image texture parameters. Generally, the image texture features were significantly affected by drying medium temperatures (p < 0.01), and the effects of drying medium velocities on the textural properties were nonsignificant (p > 0.05). Additionally, the higher drying temperatures generated products with uniform and regular texture patterns. The SSD produced samples with somewhat nonuniform and irregular texture patterns compared with HAD at 90°C. Finally, selected MLP-ANN topologies successfully predicted the moisture ratio and the geometrical characteristics of the shrimp batch using the textural properties with correlation coefficients higher than 0.99.     

Development of a Correlation Test Specimen for Highly Deformable Adhesive Systems

A new adhesive test specimen design was developed which embodied several key attributes, the most important of which was inclusion of tension, mixed-mode, and shear deformation mechanisms. The specimen design was easy to manufacture, required only simple tension testing equipment to test, and provided simple specimen geometry and boundary conditions for use in finite element model correlation exercises. By design, the individual failure points for each of the deformation mechanisms within the test specimen were separated and could be related directly to characteristics of the force versus displacement information from the experimental test. Finite element predictions using a Gurson constitutive model with element deletion at failure were generated and compared with experimental test results. It was found that while the order of failure modes within the prediction was the same as that found within the test, the element deletion technique yielded an abrupt change between failure modes not seen in the experimental test, and that a more complex numerical representation of failure would be a valuable development. Overall, the test specimen development was successful in providing a simple and repeatable method by which complex cohesive failure modes in a bonded system could be evaluated and correlated back to predictive tests.     

LIQUID-LIQUID MIXING IN STIRRED VESSELS: A REVIEW

Liquid-liquid mixing is a key process in industries that is commonly accomplished in mechanical agitation systems. Liquid-liquid mixing performance in a stirred tank can be evaluated by various parameters, namely minimum agitation speed, mixing time, circulation time, power consumption, drop size distribution, breakup and coalescence, interfacial area, and phase inversion. The importance of these liquid-liquid mixing parameters, the measurement method, and the results are discussed briefly. Input parameters such as impeller type, power number, flow pattern, number of impellers, and dispersed phase volume fraction, in addition to physical properties of phases such as viscosity and density, are reviewed. Scale-up aspects are also included.     

Solid-phase electrochemical reduction of graphene oxide films in alkaline solution

Graphene oxide (GO) film was evaporated onto graphite and used as an electrode to produce electrochemically reduced graphene oxide (ERGO) films by electrochemical reduction in 6 M KOH solution through voltammetric cycling. Fourier transformed infrared and Raman spectroscopy confirmed the presence of ERGO. Electrochemical impedance spectroscopy characterization of ERGO and GO films in ferrocyanide/ferricyanide redox couple with 0.1 M KCl supporting electrolyte gave results that are in accordance with previous reports. Based on the EIS results, ERGO shows higher capacitance and lower charge transfer resistance compared to GO.     

Synthesis of polyamides from p-Xylylene glycol and dinitriles

A series of polyamides were prepared by direct polyamidation of the p-Xylylene glycol with various commercially available dinitriles via Ritter reaction. All the synthesized polyamides showed good solubility in amide type solvents such as N-methyl-2-pyrrolidone, N,N-dimethyl acetamide, N,N-dimethyl formamide, and dimethyl sulfoxide. They exhibited inherent viscosities in the range of 0.25–0.62 dl/g. Elemental analysis, differential scanning calorimetry, thermogravimetric analysis, infrared and H¹-NMR spectroscopies were used to characterize the polymers. According to the DSC analysis, the glass transition temperatures of the polyamides were found to be 95–174°C. Thermogravimetric analysis indicated that the polymers show the 10% weight loss temperatures in the range of 250–350°C.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Effect of Co addition on microstructural and mechanical properties of WC–B4C–SiC composites

In this study, the effect of Co addition on microstructural and mechanical properties of WC-B₄C–SiC composites sintered by spark plasma sintering (SPS) method was investigated. For this purpose, three batches of WC-B₄C–SiC with different contents of Co (10 vol%, 15 vol%, and 20 Vol %) were sintered at 1400 °C. The results of X-ray diffraction (XRD) analysis of the samples indicated the formation of W₂B₅, W₃CoB₃ as well as the remained C phases and unreacted SiC phase. It was observed that by increasing the Co content, the amount of W₂B₅ phase reduces and W₃CoB₃ and C contents increase. Therefore, W₂B₅ peaks were not detected in the sample containing 20vol% Co. Relative density values above 97% were obtained for all the composites. However, a decrease was observed in relative density by increasing the Co content in the composites. The highest flexural strength (510 ± 42 MPa), fracture toughness (10.34 ± 0.82 MPa m^1/2), and hardness (20.63 ± 0.75 GPa) were also obtained for the sample containing 10vol% Co compared to the other samples. In addition, Transgranular fracture of SiC as well as pulling out of W₃CoB₃ and W₂B₅ particles were observed in the fracture surface micrographs of the samples. The presence of micro-cracks in the SiC grains, fracture of W₃CoB₃ grains, and crack deflection was reported as dominant toughening mechanisms.     

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Porous bony scaffolds are utilized to manage the growth and migration of cells from adjacent tissues to a defective position. In the current investigation, the effect of titanium oxide (TiO₂) nanoparticles on mechanical and physical properties of porous bony implants made of polymeric polycaprolactone (PCL) is studied. The bio-nanocomposite scaffolds are prepared with composition of nanocrystalline hydroxyapatite (HA) and TiO₂ powder using the freeze-drying technique for different weight fractions of TiO₂ (0 wt%, 5 wt%, 10 wt%, and 15 wt%). In order to identify the microstructure and morphology of the fabricated porous bio-nanocomposites, the X-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM) are employed. Also, the biocompatibility and biodegradability of the manufactured scaffolds are examined by placing them in a simulated body fluid (SBF) for 21 days, their weight and pH changes are measured. The rate of degradation of the PCL-HA scaffold can be controlled by varying the percentage of its constituent components. Due to an increasing growth and activity of bone cells and the apatite formation on the free surface of the fabricated bio-nanocomposite implants as well as their reasonable mechanical properties, they have the potential to be used as a bone substitute. Additionally, with the aid of the experimentally extracted mechanical properties of the scaffolds, the vibrational characteristics of a beam-type implant made of the proposed porous bio-nanocomposites are explored. The results obtained from SEM image indicate that the scaffolds produced by the employed method have high total porosity (70%–85%) and effective porosity. The pore size is obtained between 60 and 200 μm, which is desirable for the growth and propagation of bone cells. Also, it is revealed that the addition of TiO₂ nanoparticles leads to reduce the rate of dissolution of the fabricated bio-nanocomposite scaffolds.     

Structural,ferroelectric, magnetic and magnetoelectric properties of (1-x) Ba0.85Ca0.15Zr0.1Ti0.9O3 -x La0.67Sr0.33MnO3 lead-free magnetoelectric composites

The influence of an additional La_0.67Sr_0.33MnO₃ (LSMO) magnetic phase on the structural, ferromagnetic, ferroelectric, and magnetoelectric properties of Ba_0.85Ca_0.15Zr_0.1Ti_0.9O₃ (BCZT) ferroelectric phase was studied for composites of (1-x)BCZT -xLSMO (x = 0, 25, 50, 75 and 100%). The ferroelectric BCZT sample showed a perovskite single phase formation with a tetragonal crystal structure of the P4mm space group, and the magnetic phase of LSMO presented a rhombohedral crystal structure of R3c space group as shown by XRD. The composite sample with 25% LSMO exhibited large ferroelectric and piezoelectric properties with remnant, saturation polarization, and coercive electric field P_r ~7.74 μC/cm², P_s ~11.69 μC/cm² and E_C ~12.22 kV/cm with a piezoelectric coefficient d₃₃ ~ 231 pC/N. The magnetic characterization for the composites showed that the sample containing 75% of LSMO revealed the highest remnant, saturation magnetization, and coercive field of M_r ~1.358 emu/g, M_s ~19.17 emu/g, and H_C ~33.19 Oe, respectively. Moreover, it revealed the largest magnetoelectric coupling coefficient α_ME ~2.51 mV/cm.Oe with high coupling quality at a lower applied magnetic field. The results highlight the value of these composites as lead-free room temperature magnetoelectric sensors and actuators.