Optimize adaptive media playout using dynamic fuzzy logic control for video streaming

Multimedia Tools and Applications - Adaptive Media Playout (AMP) controls adapt playout rate to prevent buffer outage and to reduce delay in playout. Most AMP techniques use buffer fullness or its...     

New time-varying fuzzy sets based on a PSO midpoint of the universe of discourse

The paper presents a robust parallel distributed compensation(PDC) fuzzy controller for a nonlinear and certain system in continuous time described by the Takagi-Sugeno(T-S) fuzzy model. This controller is based on a new type of time-varying fuzzy sets(TVFS). These fuzzy sets are characterized by displacement of the kernels to the right or left of the universe of discourse, and they are directed by a well-defined criterion. In this work, we only focused on the movement of midpoint of the universe. The movements of this midpoint are optimized by particle swarm optimization(PSO) approach.     

H∞ switching fuzzy control of solar power generation systems with asymmetric input constraint

This paper aims at presenting a maximum power point tracking (MPPT) controller for photovoltaic (PV) systems subject to asymmetric input constraint. Indeed, the output voltage of the DC‐DC converter used for adjusting the photovoltaic output power can be controlled by means of variation of duty ratio limited between 1 and 0. The control design goal is to improve the efficiency of PV systems under asymmetric saturation of duty ratio. To achieve this goal, first, a Takagi‐Sugeno (T‐S) fuzzy model is used to represent the nonlinear behavior of the PV system. A T–S reference model is employed to give the ideal state direction which must be followed. To achieve a good steady state tracking, the integral of the state tracking error is used to define an extended system state vector. Second, the input characteristic is partitioned into several regions. In each region, the asymmetric saturation function can be considered as a symmetric saturation function. Furthermore, H∞ stabilization conditions for the resulting switching fuzzy control of the PV system under actuator saturation are formulated in term of linear matrix inequalities (LMI) using the Lyapunov approach. Simulation results are exhibited to demonstrate the effectiveness of the proposed design method.     

Finite element analysis on implicitly defined domains: An accurate representation based on arbitrary parametric surfaces

In this paper, we present some novel results and ideas for robust and accurate implicit representation of geometric surfaces in finite element analysis. The novel contributions of this paper are threefold: (1) describe and validate a method to represent arbitrary parametric surfaces implicitly; (2) represent arbitrary solids implicitly, including sharp features using level sets and boolean operations; (3) impose arbitrary Dirichlet and Neumann boundary conditions on the resulting implicitly defined boundaries. The methods proposed do not require local refinement of the finite element mesh in regions of high curvature, ensure the independence of the domain’s volume on the mesh, do not rely on boundary regularization, and are well suited to methods based on fixed grids such as the extended finite element method (XFEM). Numerical examples are presented to demonstrate the robustness and effectiveness of the proposed approach and show that it is possible to achieve optimal convergence rates using a fully implicit representation of object boundaries. This approach is one step in the desired direction of tying numerical simulations to computer aided design (CAD), similarly to the isogeometric analysis paradigm.     

The mechanical properties of epoxy resins

Crack propagation in a series of epoxy resins described in Part 1 has been studied as a function of testing rate and temperature. It has been found that crack propagation is continuous at low temperatures but that as the temperature is raised the mode of propagation becomes unstable (stick/slip). Features on the fracture surfaces at the crack arrest lines have been shown to be of the same dimensions as those expected for a Dugdale plastic zone. It has been suggested that the slip process takes place by slow growth of a crack through the plastic zone followed by rapid propagation through virgin material. It has been shown that the stick/slip behaviour is due to blunting of the crack which is controlled by the yield behaviour of the resin. A unique fracture criterion has been shown to be applicable to epoxy resins which is that a critical stress of the order of three times the yield stress must be achieved at a critical distance ahead of the crack. Electron microscope replicas of the fracture surfaces have been obtained and an underlying nodular structure can be resolved. However, no direct correlation between the nodule size and fracture properties has been found.     

Improvements and limitation of soy protein-based adhesive: A review

Soy protein is known for its eco-friendly, sustainable, and biodegradable qualities that are likely used as raw material in producing bioadhesive. However, soy protein-based adhesive are lacking in terms of adhesive strength and water-resistance compared to commercial formaldehyde-based adhesives such as phenol and urea-formaldehyde resin. Therefore, continuous research has been done to improve adhesive performance. This can be done via physical or modification methods, including the usage of cross-linking agents, structural modification, enzymatic modification, and the addition of additives. This review will cover these modification methods that give significant enhancement to the water-resistance and adhesive strength of soy protein-based adhesives.     

A robust model-free controller for a three-phase grid-connected photovoltaic system based on ultra-local model

In this paper, a robust model-free controller for a grid-connected photovoltaic (PV) system is designed. The system consists of a PV generator connected to a three-phase grid by a DC/AC converter. The control objectives of the overall system are to extract maximum power from the PV source, to control reactive power exchange and to improve the quality of the current injected into the grid. The model-free control technique is based on the use of an ultra-local model instead of the dynamic model of the overall system. The local model is continuously updated based on a numerical differentiator using only the input–output behavior of the controlled system. The model-free controller consists of a classical feedback controller and a compensator for the effects of internal parameter changes and external disturbances. Simulation results illustrate the efficiency of the controller for grid-connected PV systems.     

Editorial: Special Issue on High Performace Distributed Computing

The Journal of Supercomputing -     

Calibration of a Photodiode Array Spectrometer Against the Copper Point

This paper describes a method to calibrate photodiode array spectrometers in the spectral radiance mode using a fixed-point blackbody as a reference source. Fixed-point blackbodies are characterized by their excellent emissivity, uniformity, and stability, which make them superior to both conventional standard lamps and variable temperature blackbodies. The temperature of these fixed points is accurately determined being traceable to either the International Temperature Scale (ITS-90) or thermodynamically through radiometric standards. The potential advantage of the fixed-point traceability chain is that it can be universally reproduced without recourse to any hierarchical calibrations or standards. The paper presents the calibration system and discusses the limitations of such an approach. The method used obtained an uncertainty of around 1.4 % ( \(k = 2\) ) associated with radiance responsivity across the spectral region from 550 nm to 1050 nm, which is comparable to what is readily achieved with a lamp-tile or lamp-illuminated spherical source.