Effect of the pressure drop rate on cell nucleation in continuous processing of microcellular polymers

Microllular plastics are cellular polymers characterized by cell densities greater than 10⁹ cells/cm³ and cells smaller than 10 μm. One of the critical steps in the continuous production of microcellular plastics is the promotion of high cell nucleation rates in a flowing polymer matrix. These high nucleation rates can be achieved by first forming a polymer/gas solution followed by rapidly decreasing the solubility of gas in the polymer. Since, in the processing range of interest, the gas solubility in the polymer decreases as the pressure decreases, a rapid pressure drop element, consisting of a nozzle, has been employed as a continuous microcellular nucleation device. In this paper, the effects of the pressure drop rate on the nucleation of cells and the cell density are discussed. The experimental results indicate that both the magnitude and the cell density are discussed. The experimental results indicate that both the magnitude and the rate of pressure drop play a strong role in microcellular processing. The pressure phenomenon affects the thermodynamic instability induced in the polymer/gas solution and the competition between cell nucleation and growth.     

Self-aligned offset gated poly-Si TFTs with a floating sub-gate

We have fabricated a self-aligned offset-gated poly-Si thin film transistor (TFT) by employing a novel photoresist reflow process. The gate structure of the new device is consisted of two unique patterns: A main-gate and a sub-gate. The new fabrication method extends the gate-oxide over the offset region. With the assistance of the sub-gate and reflowed photoresist a self-aligned offset region is successfully obtained due to the offset oxide acting as an implantation mask. The poly-Si TFT with symmetrical offsets is easily fabricated and the new method does not require any additional offset mask step. Compared with the misaligned offset gated poly-Si TFTs, excellent symmetric electrical characteristics are obtained     

The effect of verbal elaborations on memory in young and older adults

The Stein paradigm was used to examine the circumstances under which verbal elaborations enhance memory in young and older adults. Subjects studied target adjectives that were embedded in one of three sentence contexts that varied in elaboration of the subject-adjective relationship: (1) nonelaborated base sentences; (2) base sentences with semantically consistent, but arbitrary verbal, elaborations; and (3) base sentences with explanatory verbal elaborations that clarified the significance of the subject-adjective relationship. The presence of the elaborations was varied at encoding and retrieval, and cued recall of the target adjectives was tested with incidental and intentional learning procedures. In Experiments 1A and 1B, explanatory elaborations at encoding and retrieval yielded the largest memorial facilitation for both young and older adults, and the benefit was comparable for the incidental and intentional learning measures. In Experiment 2, age-related differences in recall were minimal with explanatory elaborations at encoding and retrieval, but larger age differences occurred in the nonelaborated comparison conditions. In Experiment 3, explanatory elaborations present at encoding but not at retrieval enhanced recall when the original Stein stimuli were used, but not with the present stimuli. The implications of these results with regard to the mnemonic efficacy of verbal elaborations for young and older adults are discussed.     

Modified atmosphere packaging of a mixed prepared vegetable salad dish

The aim of this study was to design a modified atmosphere package for a mixed vegetable salad consisting of 75 g of cut carrot, 55 g of cut cucumber, 20 g of sliced garlic and 50 g of whole green pepper. Respiration data of all the components were combined with film permeability data to predict package atmospheres and design optimal packages for experimental testing for improved shelf-life of the produce. The optimal package avoided minimum O₂ and maximum CO₂ tolerance limits, and chilling injury temperatures for any component. A pouch form package made of 27 mm low density polyethylene developed a modified atmosphere of 2.0–2.1% O₂ and 5.5–5.7% CO₂, which was beneficial for all components and provided better quality retention than other test packages.     

A neural network-based power system stabilizer using power flowcharacteristics

A neural network-based power system stabilizer (neuro-PSS) is designed for a generator connected to a multi-machine power system utilizing the nonlinear power flow dynamics. The use of power flow dynamics provides a PSS for a wide range of operation with reduced size neural networks. The neuro-PSS consists of two neural networks: neuro-identifier and neuro-controller. The low-frequency oscillation is modeled by the neuro-identifier using the power flow dynamics, then a generalized backpropagation-through-time (GBTT) algorithm is developed to train the neuro-controller. The simulation results show that the neuro-PSS designed in this paper performs well with good damping in a wide operation range compared with the conventional PSS     

Climate change gains more from nuclear substitution than from conservation

We show the massive reduction achievable, in both emissions and climate change impact, from enhanced nuclear energy use on the forecasts of future world energy use and its associated environmental impacts. A range encompassing the major scenarios for the World's energy demand have been analyzed using the latest version of the climate-modeling MAGICC/SCENGEN software (Version 4.1). We have updated and predicted the impacts of 80% substitution with CO₂-free sources (likely predominantly nuclear) for coal-fired electricity (by 2030) and for transportation fuel (by 2040). For transportation, hydrogen produced by CO₂-free sources would replace gasoline and diesel fuels. In this paper, to bracket the range of futures, we simply focus on two scenarios from the Intergovernmental Panel on Climate Change's (IPCC), one (A1FI) that is energy-profligate and one (B2) that is energy-conserving.The results show that, interestingly, projected average global temperatures for all scenarios are fairly similar until about 2035 (a further rise beyond the 1990 average temperature of +0.75 ± 0.1 K) regardless of energy usage and its sources. However, by 2050, the different IPCC scenarios diverge markedly. Understandably, A1FI is projected to have noticeably stronger effects than B2 on average global temperatures (about 0.3 K more in 2050) but the effect is much stronger over land at mid and high latitudes (up to almost 1 K more). What is most striking is that the substitution of CO₂-free sources gives projected average temperature rises in 2050 over key land areas (North America and China) that are very similar for the two energy-use scenarios—typically 1–1.5 K because A1FI's additional energy is predominantly supplied by nuclear. In contrast, projected rises with the unaltered cases are markedly different being about 2.5 K for A1FI and 1.5–2 K for B2. The projected changes in rainfall distribution show similar patterns, especially for the expected increases in higher latitudes.With the assumption of no additional policies for substitution of energy sources beyond 2040, temperature divergence between the two scenarios of relative energy profligacy or conservation grows in the latter half of the 21st century, even with substitution. However, the early substitution of nuclear energy and hydrogen appears to buy time and is not crucially dependent on severe, near-term curtailment of energy use. Near-term curtailment is too difficult to implement at a time of rapid industrialization of major emerging economies. Of course, proportionately larger deployments of CO₂-free energy sources are needed for more energy-intensive scenarios.Nuclear power must dominate as the source of CO₂-free energy since it is proven, dependable, available on a large scale, and economic. Social objections to nuclear energy in some countries and quarters are seen as well-meaning but misguided distractions from solving the energy and environmental crises that are now facing world sustainability. The time for real technical, social and political action is now.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.