Transoesophageal echocardiographic assessment of haemodynamic function during laparoscopic cholecystectomy

We have measured cardiovascular changes associated with insufflation of carbon dioxide and the reverse Trendelenburg position during laparoscopic cholecystectomy, using transoesophageal echocardiography in 13 healthy patients. End-tidal carbon dioxide values increased after insufflation of carbon dioxide, with values significantly (P < 0.05) increased after lateral tilt positioning. Creation of a pneumoperitoneum was associated with increases (P < 0.05) in left ventricular end-systolic wall stress, concomitant with increases (P < 0.01) in peak airway pressure and systemic arterial pressure. In addition, left ventricular end-diastolic area decreased (P < 0.05) after reverse Trendelenburg positioning. Left ventricular ejection fraction was maintained throughout the study.     

Achieving synergy in collaborative education

Professional software engineering continues to face problems that involve large-scale (complex) software systems development. Such efforts typically require team collaboration over months, possibly years. Once implemented, the system must be maintained for sometimes decades. This development and maintenance life cycle requires not only technical knowledge and skills in software development, but also the knowledge and skills associated with software process. We believe the traditional computer science curriculum fails to consider this spectrum of needs. We also believe, however, that software engineering must use certain elements of the core knowledge and skills taught by computer scientists as its foundation. We describe lessons learned from the 10-year collaboration between Monmouth University and the Software Engineering Center of the US Army's CECOM (Communications Electronics Command). The center recruits electrical engineering and computer science graduates from academic institutions in the geographic regions surrounding its various installations to be part of its intern program; Monmouth University, in turn, incorporates the demands of the intern program in its Master of Science in software engineering curriculum     

Climate change gains more from nuclear substitution than from conservation

We show the massive reduction achievable, in both emissions and climate change impact, from enhanced nuclear energy use on the forecasts of future world energy use and its associated environmental impacts. A range encompassing the major scenarios for the World's energy demand have been analyzed using the latest version of the climate-modeling MAGICC/SCENGEN software (Version 4.1). We have updated and predicted the impacts of 80% substitution with CO₂-free sources (likely predominantly nuclear) for coal-fired electricity (by 2030) and for transportation fuel (by 2040). For transportation, hydrogen produced by CO₂-free sources would replace gasoline and diesel fuels. In this paper, to bracket the range of futures, we simply focus on two scenarios from the Intergovernmental Panel on Climate Change's (IPCC), one (A1FI) that is energy-profligate and one (B2) that is energy-conserving.The results show that, interestingly, projected average global temperatures for all scenarios are fairly similar until about 2035 (a further rise beyond the 1990 average temperature of +0.75 ± 0.1 K) regardless of energy usage and its sources. However, by 2050, the different IPCC scenarios diverge markedly. Understandably, A1FI is projected to have noticeably stronger effects than B2 on average global temperatures (about 0.3 K more in 2050) but the effect is much stronger over land at mid and high latitudes (up to almost 1 K more). What is most striking is that the substitution of CO₂-free sources gives projected average temperature rises in 2050 over key land areas (North America and China) that are very similar for the two energy-use scenarios—typically 1–1.5 K because A1FI's additional energy is predominantly supplied by nuclear. In contrast, projected rises with the unaltered cases are markedly different being about 2.5 K for A1FI and 1.5–2 K for B2. The projected changes in rainfall distribution show similar patterns, especially for the expected increases in higher latitudes.With the assumption of no additional policies for substitution of energy sources beyond 2040, temperature divergence between the two scenarios of relative energy profligacy or conservation grows in the latter half of the 21st century, even with substitution. However, the early substitution of nuclear energy and hydrogen appears to buy time and is not crucially dependent on severe, near-term curtailment of energy use. Near-term curtailment is too difficult to implement at a time of rapid industrialization of major emerging economies. Of course, proportionately larger deployments of CO₂-free energy sources are needed for more energy-intensive scenarios.Nuclear power must dominate as the source of CO₂-free energy since it is proven, dependable, available on a large scale, and economic. Social objections to nuclear energy in some countries and quarters are seen as well-meaning but misguided distractions from solving the energy and environmental crises that are now facing world sustainability. The time for real technical, social and political action is now.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry     

Learning spreadsheets: human instruction vs. computer-based instruction

The increasing need to instruct students in the use of personal computer software, especially electronic spreadsheets, is placing greater demands on the already full university curriculum. A potential help in meeting these demands is the readily available computer-based software tutorials. In order to explore the feasibility of computer-based instruction as an alternative to human instruction, this research compares two modes of instruction, computer-based and human. An experiment was conducted with groups of business student subjects. The research results indicate no difference in students' attitude towards computer-based instruction and human instruction of spreadsheets. Students' short-term recall of the software syntax being taught is as strong with computer-based instruction as with human instruction. These results were not affected by the level of personal computer experience that students had prior to the experiment. However, the ability to comprehend and immediately apply the software to a task is greater with human instruction than with computer-aided instruction. This advantage holds true for students instructed by experienced and inexperienced instructors.     

Integrating heterogeneous distributed COTS discrete-event simulation packages: an emerging standards-based approach

This paper reports on the progress made toward the emergence of standards to support the integration of heterogeneous discrete-event simulations (DESs) created in specialist support tools called commercial-off-the-shelf (COTS) discrete-event simulation packages (CSPs). The general standard for heterogeneous integration in this area has been developed from research in distributed simulation and is the IEEE 1516 standard The High Level Architecture (HLA). However, the specific needs of heterogeneous CSP integration require that the HLA is augmented by additional complementary standards. These are the suite of CSP interoperability (CSPI) standards being developed under the Simulation Interoperability Standards Organization (SISO-http://www.sisostds.org) by the CSPI Product Development Group (CSPI-PDG). The suite consists of several interoperability reference models (IRMs) that outline different integration needs of CSPI, interoperability frameworks (IFs) that define the HLA-based solution to each IRM, appropriate data exchange representations to specify the data exchanged in an IF, and benchmarks termed CSP emulators (CSPEs). This paper contributes to the development of the Type I IF that is intended to represent the HLA-based solution to the problem outlined by the Type I IRM (asynchronous entity passing) by developing the entity transfer specification (ETS) data exchange representation. The use of the ETS in an illustrative case study implemented using a prototype CSPE is shown. This case study also allows us to highlight the importance of event granularity and lookahead in the performance and development of the Type I IF, and to discuss possible methods to automate the capture of appropriate values of lookahead.     

A design advisor for the optimal inspection of circularity tolerance

In the wake of growing importance for quality and the need to reduce inspection costs simultaneously, the need for a scientific method of selecting an optimum inspection strategy for coordinate measuring machine (CMM) based inspection has become very important. The inspection error resulting from CMM inspection is greatly affected by the profile irregularities and the sampling strategy, which includes sample size, sampling methods, and algorithms used for form evaluation. This paper describes a system that can recommend an optimal inspection plan based on the needs of the user. A design of experiments (DOE) based approach is used to relate the inspection error with sampling strategies. Surface irregularities are included in the form of lobes formed on the profile. A new two-way model is proposed that works in both directions between the sampling strategy and the performance metrics. The results indicate that the number of lobes and the sampling method used have little impact on the inspection error, while the sample size and form evaluation algorithms have a significant influence. An inspection plan advisor is presented, which provides an inspection plan based on the estimated shape and acceptable measurement error.     

Freestanding Alumina Membrane by Double-Layer Anodization

A novel method has been developed for fabricating full or partial freestanding anodic alumina. In our method a sacrificial metal layer is introduced between an Al film and a Si₃N₄ substrate. A freestanding alumina film at wafer scale is successfully achieved by anodizing the double metal layer, during which the alumina is spontaneously stripped off the Si₃N₄ substrate due to the anodic oxidation of the sacrificial layer. The barrier oxide of the alumina film is effectively removed either by H₃PO₄ dissolution or by CF₄ reactive ion etching. The freestanding alumina film is utilized as a contact mask to transfer its nanoporous pattern to a Si substrate. By patterning the sacrificial metal layer with contact lithography, a partial freestanding alumina film is successfully achieved on the silicon chip, producing a unique micro/nanofluidic channel. Compared with previous techniques, the method reported here is advantageous for its simplicity and flexibility     

A Novel Inverse-Magnetostrictive Force Sensor

The change in magnetic permeability of a material under stress (inverse magnetostriction) offers the potential for a high-performance, low-cost force sensor capable of being used in harsh real-world environments. The existing force sensor technologies are limited in their use in commercial products by either cost issues or susceptibility to electromagnetic noise. Inverse Magnetostriction has been used to measure strain in controlled environments since its discovery by Joule in 1847, but not in practical applications due to a lack of data on how magnetic material properties change with environmental conditions such as temperature. Utilizing an innovative noise-reducing self-inductance design, this paper presents the basis for an inverse-magnetostrictive compressive load sensor. A lumped-parameter model for the change in sensor inductance under load, due to both mechanical and magnetic effects, is derived. The material properties of a magnetostrictive iron alloy are empirically determined over a broad range of loads and temperatures. The model and material properties are confirmed by testing a prototype force sensor. The prototype measures compressive forces from 100 to 25 000 N over a temperature range of 20 degC to 120 deg with a typical error of +/-2% (4% max). The sensor does experience significant thermal hysteresis for which the model does not currently account. This work was motivated by the need for a force sensor in an automobile electric brake system and used a single iron alloy (50% Ni), but the model and testing procedure provide a roadmap for future research to improve the performance and capabilities of such a sensor     

Turning software into a service

The software as a service model composes services dynamically, as needed, by binding several lower-level services-thus overcoming many limitations that constrain traditional software use, deployment, and evolution.