Anodic stripping voltammetric measurement of trace heavy metals at antimony film carbon paste electrode

The antimony film carbon paste electrode (SbF-CPE) was prepared in situ on the carbon paste substrate electrode as a “mercury-free” electrochemical sensor. Its aptitude for measuring some selected trace heavy metals has been demonstrated in combination with square-wave anodic stripping voltammetry in non-deaerated model solutions of 0.01 M hydrochloric acid with pH 2. Some important operational parameters, such as deposition potential, deposition time, and concentration of antimony ions were optimized, and the electroanalytical performance of the SbF-CPE was critically compared with both bismuth film carbon paste electrode (BiF-CPE) and mercury film carbon paste electrode (MF-CPE) using Cd(II) and Pb(II) as test metal ions. In comparison with BiF-CPE and MF-CPE, the SbF-CPE exhibited superior electroanalytical performance in more acidic medium (pH 2) associated with favorably low hydrogen evolution, improved stripping response for Cd(II), and moreover, stripping signals corresponding to Cd(II) and Pb(II) at the SbF-CPE were slightly narrower than those observed at bismuth and mercury counterparts. In addition, the comparison with antimony film electrode prepared at the glassy carbon substrate electrode displayed higher stripping current response recorded at the SbF-CPE. The newly developed sensor revealed highly linear behavior in the examined concentration range from 5 to 50 μg L⁻¹, with limits of detection (3σ) of 0.8 μg L⁻¹ for Cd(II), and 0.2 μg L⁻¹ for Pb(II) in connection with 120 s deposition step, offering good reproducibility of ±3.8% for Cd(II), and ±1.2% for Pb(II) (30 μg L⁻¹, n = 10). Preliminary experiments disclosed that SbF-CPE and MF-CPE exhibit comparable performance for measuring trace concentration levels of Zn(II) in acidic medium with pH 2, whereas its detection with BiF-CPE was practically impossible. Finally, the practical applicability of SbF-CPE was demonstrated via measuring Cd(II) and Pb(II) in a real water sample.     

Effect of β-cyclodextrin on antioxidant activity of coumaric acids

Inclusion complexes of o-, m- and p-coumaric acid (CA) with β-cyclodextrin (βCD) were prepared in stoichiometric ratios (1:1) and stability constants and antioxidant activity of the complexes were studied. The apparent stability constants in aqueous solution of 0.39 × 10³ M⁻¹, 2.81 × 10³ M⁻¹ and 49 × 10³ M⁻¹ for o-, m- and p-CA complexes, respectively, were determined by phase solubility tests. Different analytical techniques (IR, MS) in combination with different solvent washing procedures, were used for confirmation of the nature of the inclusion complexes. Dioxan was a suitable solvent for removal of only free CA and CA adsorbed on the surface of the βCD, while methanol removed absorbed, included and free CA from the complexes. In the case of o- and m-CA–βCD complexes, antioxidant activity was significantly increased while, in p-CA–βCD, it remained unchanged. The impact of complex structure on antioxidant activity of CA isomers was clarified.     

可靠性和维修性——现代设计的关键因素（二）

2.3可靠性维修性的定量分析方法现代设计过程设计到多种学科,其目的是获得合理的市场价格、性能和功能性。目前绝大多数设备说明书中都包含有一个报告,其中定义了预期的系统效率或可用性,一般来说,系统的可用性可以这样计算:A=总的可用总时的间可-用实时际间停机时间=MTTMRT BM     

Local amorphization of atomic structure in Mg<Subscript>0.54</Subscript>Zn<Subscript>0.46</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> ferrites

The structure of Mg_0.54Zn_0.46Fe₂O₄ ferrites has been studied using x-ray diffraction techniques. It is established that high-temperature annealing (T = 1280°C, τ = 0.5–8.0 h) leads to a change in the crystal structure of samples, which is accompanied by their local amorphization.     

Monthly mean hourly global solar radiation estimation

In this paper, selected empirical models were used to estimate the monthly mean hourly global solar radiation from the daily global radiation at three sites in the east coast of Malaysia. The purpose is to determine the most accurate model to be used for estimating the monthly mean hourly global solar radiation in these sites. The hourly global solar radiation data used for the validation of selected models were obtained from the Malaysian Meteorology Department and University Malaysia Terengganu Renewable Energy Station. In order to indicate the performance of the models, the statistical test methods of the normalized mean bias error, normalized root mean square error, correlation coefficient and t-statistical test were used. The monthly mean hourly global solar radiation values were calculated by using six models and the results were compared with corresponding measured data. All the models fit the data adequately and can be used to estimate the monthly mean hourly global solar radiation. This study finds that the Collares-Pereira and Rabl model performed better than the other models. Therefore the Collares-Pereira and Rabl model is recommended to estimate the monthly mean hourly global radiations for the east coast of Malaysia with humid tropical climate and in elsewhere with similar climatic conditions.     

Shaping Luminescent Properties of Yb3+ and Ho3+ Co‐Doped Upconverting Core–Shell β‐NaYF4 Nanoparticles by Dopant Distribution and Spacing

At the core of luminescence color and lifetime tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the impact of the particle architecture for commonly used sensitizer (S) and activator (A) ions. In this respect, a series of core@shell NaYF₄ UCNPs doped with Yb³⁺ and Ho³⁺ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@…, …@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core–shell NPs. As revealed by quantitative steady‐state and time‐resolved luminescence studies, the relative spatial distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical impact on their luminescence characteristics. Although the increased amount of Yb³⁺ ions boosts UCNP performance by amplifying the absorption, the Yb³⁺ ions can also efficiently dissipate the energy stored in the material through energy migration to the surface, thereby reducing the overall energy transfer efficiency to the activator ions. The results provide yet another proof that UC phosphor chemistry combined with materials engineering through intentional core@shell structures may help to fine‐tune the luminescence features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and display technologies.     

A benign form of chronic lympholeukemia]

According to the classification of chronic lymphocytic leukemia (CLL) proposed by A. I. Vorob'ev and M. D. Brilliant in 1983, benign CLL is a distinct form of CLL which is characterized by low level of absolute lymphocytosis, absent or mild peripheral lymphadenopathy, slow progression. No specific therapy is needed. The paper presents clinical, morphological and immunological analysis of 34 cases of benign CLL (17 males and 17 females, mean age 58 years). Patients were included in the study if they had lymphocyte count less than 30,000 and no significant growth of lymphoid tissue for at least 3 years. They were followed up from 3 to 24 years (11 years, on the average). The main features of benign CLL are the following: no "B" symptoms, no essential enlargement of the lymphoid organs, a stable low level of absolute lymphocytosis, low prolymphocyte count in the blood smear (0.95% +/- 0.2), nodular or nodular-interstitial proliferation in the bone marrow. We failed to find any cases with paraprotein secretion. There was immunophenotype typical for CLL in 91% of cases (CD19+, CD20+, CD23+, CD5+, EM+, CR1-/CR2+, sIg+(-)). None was positive for CD38 activation marker. One trisomy 12 cases was detected by FISH method. 8 patients died so far, but not because of the tumor progression or transformation, median survival was 22 years.     

Resistance spot welding control based on fuzzy logic

Resistance spot welding is one of the most important welding procedures. Therefore, a lot of research is done in order to increase its cost effectiveness. One of the problems is short electrode life, especially when coated materials are welded. This paper presents a fuzzy logic-based controller which is capable of detecting expulsion and stopping the welding process when it occurs. Consequently, electrodes are spared of unnecessary high stresses which occur when the energy is being poured into the weld region after expulsion. Their life is therefore substantially increased.