Flavonoid,tannin and hypericin concentrations in the leaves of St. John’s wort (Hypericum perforatum L.) are affected by UV-B radiation levels

St. John’s wort (Hypericum perforatum L.) herb is used as a herb-tea or as a food supplement because of its antidepressive properties. St. John’s wort, grown under different levels of UV-B radiation, was analysed for its concentrations of flavonoids, tannins and hypericin. A high level of UV-B radiation increased leaf concentrations of flavonoids from 6.31 to 9.00/100 g in dry matter (DM) and of tannins from 26.6 to 31.4/100 g in DM. The concentration of hypericin in leaves exposed to enhanced UV-B radiation (0.08/100 g in DM) was lower than that of leaves exposed to reduced UV-B radiation (0.09/100 g in DM). We conclude that the concentrations of bioactive substances in St. John’s wort herb can be altered by regulating the environment during plant growth.     

Diagnostics of anodic stripping mechanisms under square-wave voltammetry conditions using bismuth film substrates

A mechanistic study to provide diagnostics of anodic stripping electrode processes at bismuth-film electrodes is presented from both theoretical and experimental points of view. Theoretical models for three types of electrode mechanisms are developed under conditions of square-wave voltammetry, combining rigorous modeling based on integral equations and the step function method, resulting in derivation of a single numerical recurrent formula to predict the outcome of the voltammetric experiment. In the course of the deposition step, it has been assumed that a uniform film of the metal analyte is formed on the bismuth substrate, in situ deposited onto a glassy carbon electrode surface, without considering mass transfer within either the bismuth or the metal analyte film. Theoretical data are analyzed in terms of dimensionless critical parameters related with electrode kinetics, mass transfer, adsorption equilibria, and possible lateral interactions within the deposited metal particles. Theoretical analysis enables definition of simple criteria for differentiation and characterization of electrode processes. Comparing theoretical and experimental data, anodic stripping processes of zinc(II), cadmium(II), and lead(II) are successfully characterized, revealing significant differences in their reaction pathways. The proposed easy-to-perform diagnostic route is considered to be of a general use while the bismuth film exploited in this study served as a convenient nonmercury model substrate surface.     

5‐Benzylidenethiazolidin‐4‐ones as Multitarget Inhibitors of Bacterial Mur Ligases

Mur ligases participate in the intracellular path of bacterial peptidoglycan biosynthesis and constitute attractive, although so far underexploited, targets for antibacterial drug discovery. A series of hydroxy‐substituted 5‐benzylidenethiazolidin‐4‐ones were synthesized and tested as inhibitors of Mur ligases. The most potent compound 5 a was active against MurD–F with IC₅₀ values between 2 and 6 μm, making it a promising multitarget inhibitor of Mur ligases. Antibacterial activity against different strains, inhibitory activity against protein kinases, mutagenicity and genotoxicity of 5 a were also investigated, and kinetic and NMR studies were conducted.     

可靠性和维修性——现代设计的关键因素（三）

3.提高可靠性的方法可以系统提高整个寿命周期内技术系统可靠性的方法称为可靠性改进法,它包括以下主要步骤:A.评估设备可靠性情况。B.确定可靠性目标。C.引进提高可靠性的活动。D.进行评估。E.将评估结果与目标比较,制定后续措施。F.查出问题以及主要的造成不可靠性的原因。重复执行从步骤C到F,直到实现可靠性目标。设备的寿命周期可以粗略地分为如下阶段:方案和可行性、设计和研制、生产和使用。如果增加用于提高可靠性的费用,则对设备可靠性可能的不利影响会显著下降。3.1在使用阶段可靠性的提高大多数设备的可靠性是在使用阶段前定…     

On the accuracy of CFD modeling of cyclic high heat flux divertor experiment

To investigate the heat removal capability of conceptual divertor cooling fingers, accurate computational fluid dynamics (CFD) analyses are indispensable. Although the cooling performance of the divertor finger has been successfully high-heat-flux tested under real DEMO conditions in a combined helium loop and electron beam facility at the Efremov Institute, Russia, an accompanying numerical simulation of the experiments is of great importance. This might help to better understand the complex thermo-hydraulic conditions with the aim of predicting other different load cases. To accurately reproduce the experimental boundary conditions, the Gaussian-like shape of the absorbed power was taken into account and the heat losses were estimated. Modeling of the structure thermal conductivity was also found to be an important source of modeling uncertainty. In the context of accurate modeling of experimental conditions, the effect of some modeling assumptions was evaluated. Transient simulations of the cyclic heat flux experiment were performed only for the solid part of the cooling finger to avoid excessively long computation times. The helium cooling was taken into account by the heat transfer coefficient (HTC) on the fluid–structure interface, obtained from the steady-state simulations of the full solid–fluid model. The HTC distribution did not vary with time throughout the entire transient simulation. The modeling error associated with such HTC approximation was estimated for the particular cyclic experiment. It is shown that the simulated temperature cycles on the top of experimental mock-up agree well with the measured data.     

Evolution of the structure of a mixed Cu<Subscript>60</Subscript>Fe<Subscript>40</Subscript> powder with increasing deformation

The structure of compacted Cu₆₀Fe₄₀ powder in various stages of thermomechanical processing (with a logarithmic strain varied within e = 0?7.4) has been studied by X-ray diffraction. It is established that the atomic order evolution in this system is characterized by a certain critical strain (e = 4.6), at which a specific deformation-induced nanostructure is formed. In this structure, clusters of a bcc α-Fe phase with dimensions on the order of 200 Å are coherently conjugated with a polycrystalline fcc structure of copper, thus representing a new class of materials.     

Reactivity at the film/solution interface of ex situ prepared bismuth film electrodes: A scanning electrochemical microscopy (SECM) and atomic force microscopy (AFM) investigation

Bismuth film electrodes (BiFEs) prepared ex situ with and without complexing bromide ions in the modification solution were investigated using scanning electrochemical microscopy (SECM) and atomic force microscopy (AFM). A feedback mode of the SECM was employed to examine the conductivity and reactivity of a series of thin bismuth films deposited onto disk glassy carbon substrate electrodes (GCEs) of 3 mm in diameter. A platinum micro-electrode (? = 25 μm) was used as the SECM tip, and current against tip/substrate distance was recorded in solutions containing either Ru(NH₃)₆³⁺ or Fe(CN)₆⁴⁻ species as redox mediators. With both redox mediators positive feedback approach curves were recorded, which indicated that the bismuth film deposition protocol associated with the addition of bromide ions in the modification solution did not compromise the conductivity of the bismuth film in comparison with that prepared without bromide. However, at the former Bi film a slight kinetic hindering was observed in recycling Ru(NH₃)₆³⁺, suggesting a different surface potential. On the other hand, the approach curves recorded by using Fe(CN)₆⁴⁻ showed that both types of the aforementioned bismuth films exhibited local reactivity with the oxidised form of the redox mediator, and that bismuth film obtained with bromide ions exhibited slightly lower reactivity. The use of SECM in the scanning operation mode allowed us to ascertain that the bismuth deposits were uniformly distributed across the whole surface of the glassy carbon substrate electrode. Comparative AFM measurements corroborated the above findings and additionally revealed a denser growth of smaller bismuth crystals over the surface of the substrate electrode in the presence of bromide ions, while the crystals were bigger but sparser in the absence of bromide ions in the modification solution.     

Analysis of miR-9-5p,miR-124-3p,miR-21-5p,miR-138-5p,and miR-1-3p in Glioblastoma Cell Lines and Extracellular Vesicles

Glioblastoma (GBM), the most common primary brain tumor, is a complex and extremely aggressive disease. Despite recent advances in molecular biology, there is a lack of biomarkers, which would improve GBM’s diagnosis, prognosis, and therapy. Here, we analyzed by qPCR the expression levels of a set of miRNAs in GBM and lower-grade glioma human tissue samples and performed a survival analysis in silico. We then determined the expression of same miRNAs and their selected target mRNAs in small extracellular vesicles (sEVs) of GBM cell lines. We showed that the expression of miR-21-5p was significantly increased in GBM tissue compared to lower-grade glioma and reference brain tissue, while miR-124-3p and miR-138-5p were overexpressed in reference brain tissue compared to GBM. We also demonstrated that miR-9-5p and miR-124-3p were overexpressed in the sEVs of GBM stem cell lines (NCH421k or NCH644, respectively) compared to the sEVs of all other GBM cell lines and astrocytes. VIM mRNA, a target of miR-124-3p and miR-138-5p, was overexpressed in the sEVs of U251 and U87 GBM cell lines compared to the sEVs of GBM stem cell line and also astrocytes. Our results suggest VIM mRNA, miR-9-5p miRNA, and miR-124-3p miRNA could serve as biomarkers of the sEVs of GBM cells.     

Selenium concentration in St. John’s wort (Hypericum perforatum L.) herb after foliar spraying of young plants under different UV-B radiation levels

St. John’s wort (Hypericum perforatum L.) was grown under different levels of UV-B radiation, with selenium (10 mg l⁻¹ Se applied by foliar spraying in the form of sodium selenate) or without foliar Se application. The different levels of UV-B radiation comprised an enhanced level simulating 17% ozone depletion, ambient level, and a reduced level of UV-B radiation. The concentration of Se in unsprayed plants was from 20 ng g⁻¹ to 120 ng g⁻¹. The concentration of Se in the organs of plants foliarly sprayed with Se ranged from 1000 ng g⁻¹ to 12,000 ng g⁻¹, the highest concentration being detected in plants grown under reduced levels of UV-B radiation. Foliar application of Se fertiliser is feasible and effective in St. John’s wort and results in Se-enriched nutritional supplements.