Sunflower Acid Oil-Based Production of Rhamnolipid Using Pseudomonas aeruginosa and Its Application in Liquid Detergents

Utilization of industrial waste as substrates for the rhamnolipid synthesis by Pseudomonas aeruginosa is a worthy alternative for conventionally used vegetable oils and fatty acids to reduce the production cost of rhamnolipid. Sunflower acid oil (SAO), a by-product of the oil industry, contains 70% 18:0 fatty acid, with oleic acid as a major component. In this scope, production and analysis of rhamnolipid was successfully demonstrated using SAO as a new substrate. Pseudomonas aeruginosa produced rhamnolipid (a glycolipid biosurfactant) at a maximum concentration of 4.9 g L⁻¹ with 60 g L⁻¹ of SAO in the medium. Structural properties of rhamnolipid biosurfactant are confirmed using thin layer chromatography (TLC), high performance liquid chromatography (HPLC), and fourier transformed infrared spectroscopy (FTIR) analysis. Further surface-active properties of the crude rhamnolipid were evaluated by measuring surface tension and emulsification properties. The synthesized rhamnolipid reduced the surface tension of water to 30.12 mN m⁻¹ and interfacial tension (against heptane) to 0.52 mN m⁻¹. Moreover, rhamnolipid shows the highest emulsification index (above 80%) for vegetable oils. This study confirms the use of SAO as a potential substrate for rhamnolipid production. The synthesized rhamnolipid was incorporated in liquid detergent formulation along with alpha olefin sulfonate (AOS) and sodium lauryl ether sulfate (SLES). The performance properties including foaming and cleaning efficiency of liquid detergent were compared.     

Proximate Composition and Fatty Acid Profile of <Emphasis Type="Italic">Pongamia pinnata</Emphasis>, a Potential Biodiesel Crop

The chemical characteristics of Pongamia pinnata seeds, focussing on proximate composition and the fatty acid profile of its oil, are presented. The proximate composition of P. pinnata seeds was: 3.8% ash, 9.7% sugar, 7.07% protein, 24% oil, 10.7% free amino acids, and 0.24% free fatty acids. The oil was extracted from seeds by use of different solvents and the highest yield (29%) was obtained by use of n-hexane. Monounsaturated and polyunsaturated fatty acids accounted for 63.3 and 22.9%, respectively, of the seed oil. Oleic acid was the major fatty acid but a substantial amount of erucic acid was also detected; this was not reported in previous studies. The level of erucic acid and the presence of toxic flavonoids, for example karanjin, pongapin, and pongaglabrin, render the oil inedible according to WHO recommendations. However, low levels of saturated and polyunsaturated fatty acids with desirable cetane number and iodine value suggest potential for application as a biodiesel fuel.     

Bio-hydrometallurgical processing of low grade chalcopyrite for the recovery of copper metal

A process flowsheet was developed to recover copper metal from the lean sulfide ore of copper available at Malanjkhand, Hindustan Copper Limited (HCL), India. Copper pregnant leach solution (PLS) obtained from bio-heap leaching of chalcopyrite containing 0.3% copper was purified through solvent extraction (SX) and the copper recovered by electrowinning (EW). The copper-free raffinate obtained from SX stripping unit was returned back to the bioleaching circuit. The purity of the electrolytic copper produced at pilot scale was found to be 99.96%. During electrowinning, the effect of flow rate of electrolyte on current efficiency and energy consumption was also studied.     

Electrospinning pure protein solutions in core–shell fibers

Electrospinning of protein‐loaded fibers faces many challenges, e.g. burst release owing to segregation of the protein on the fiber surface, loss of activity due to electrospinning conditions, limitation of loading capacity etc. Core–shell electrospinning provides an effective way to electrospin fibers wherein the core can be loaded with bioactive molecules in friendly conditions of a compatible polymer solution, thereby protecting the molecules from the electrostatic field and organic solvent of shell solutions. The shell polymer, after the electrospinning, acts as a barrier to control the release of the loaded molecules. However, the limitation of loading capacity still remains due the prerequisite of using an additional polymer as additive to achieve the minimum viscosity of the core solution required for viscous drag by the shell solution being drawn by the electrostatic force. The work reported here aims to alleviate the need of a polymer additive by using aqueous protein solutions of very high concentration. High concentrations of protein solutions were successfully electrospun as the core of the protein–poly(lactide‐co‐glycolic acid) core–shell fibers. A partitioning effect was seen in the controlled release of hydrophilic proteins as they were retained in the aqueous core for longer times. Using lysozyme as a model protein, it was shown that the activity is significantly retained after electrospinning, compared with electrospinning in monolithic fibers. Moreover, the lysozyme activity was also comparable with the lysozyme released from core–shell fibers spun using poly(vinyl acetate) as additive in the core. Copyright © 2012 Society of Chemical Industry     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Influence of Distributed Particle Size on the Determination of the Parabolic Rate Constant for Oxidation by the Powder Method

The established analysis for the study of oxidation using powder specimens is based on the assumption of monosized particles. The experiments, however, are conducted on powders with a distributed particle size. Here we present a statistical approach for the calculation of the rate constant for oxidation. The results of the analysis are applied to new data on oxidation studies of dense powders of silicon carbonitride amorphous ceramics. The monosized model requires a wide range of values for the rate constant to fit the short term and the long-term data, leading to considerable ambiguity in the estimate of the parabolic rate constant, k _p, for oxidation. In contrast the statistical model fits over the entire range of data, yielding a much more reliable value for k _p. For example, the monosized approach gave a value in the range 19.7 × 10⁻¹⁸ < k _p < 2.7 × 10⁻¹⁸ m²/s. In contrast, the statistical model yields a specific value of 4.5 × 10⁻¹⁸ m²/s.     

Phase Evolution,Magnetic, Optical,and Dielectric Properties of Zr‐Substituted Bi0.9Gd0.1FeO3 Multiferroics

Polycrystalline BiFeO₃ (BFO) and Bi_0.90Gd_0.10Fe_1?xZr_xO₃ (x = 0.0–0.10; BGFZ_x) ceramics were synthesized by solid‐state reaction method. Rietveld analysis of X‐ray diffraction patterns showed that BFO and BGFZ_x = 0.0 samples are stabilized in rhombohedral structure (space group R3c), whereas a small fraction of orthorhombic phase (space group Pn2₁a) is observed for BGFZ_{x = 0.03–0.10} samples. Suppression and disappearance of some Raman modes indicated a structural phase transition with addition of Zr dopant at Fe site. Magnetic measurements exhibited weak ferromagnetic behavior of BGFZ_x samples with increasing Zr⁺⁴ concentrations. The insertion of Gd⁺³ ions at Bi⁺³ sites and nonmagnetic Zr⁺⁴ ions at Fe⁺³ sites in Fe–O–Fe network suppressed the spin cycloid structure of BFO which in turn enhanced the magnetization of these ceramics. Electron spin resonance spectra revealed the breaking of spin cycloid of BFO due to the development of free spins with addition of Zr⁺⁴ dopants at Fe sites. UV–Visible diffuse reflectance spectra showed one d–d crystal field transition and two charge‐transfer (C–T) transitions along with a sharp absorption of light in visible region for all samples. Almost frequency‐independent dielectric constant and dielectric loss along with very low values of dielectric loss indicated greatly improved dielectric properties for BGFZ_{x = 0.03–0.10} samples.