Analysis of the correlation between acoustic noise and vibration generated by a multi-layer ceramic capacitor

Acoustic noise generated by a multi-layer ceramic capacitor (MLCC) makes users uncomfortable, so the problem must be analyzed to reduce the noise. There is a correlation between the acoustic noise and the vibration of MLCCs and the circuit board. Therefore, the acoustic noise problem must be investigated from a vibration perspective. In this study, the acoustic noise-generating mechanism was investigated, and the relationship between the characteristics of the noise and the dynamic characteristics of the circuit board with MLCC was analyzed. And a correlation criterion was proposed to predict the acoustic noise using the vibration response of the circuit board.     

An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer

We develop a miniaturized batch-type screw mixer (BSM) for uniform mixing of polymer resin and nanoparticles, based on the stretching of material elements. This stretching is induced by the combination of recirculating cross-sectional flows in deep channels of the screw and high shear stress developed at flight regions. The BSM is used to produce a polymer nano-composite composed of multi-walled carbon nanotubes and polydimethylsiloxane resin. The mixing performance of the BSM is characterized quantitatively by estimating two different types of mixing efficiencies (i.e., dispersive mixing and distributive mixing) via transmitted light microscope images. The developed BSM highly improves the mixing performance rather than that of a conventional ultrasonic mixing device.     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Characteristics of electrical responsive chitosan/polyallylamine interpenetrating polymer network hydrogel

An interpenetrating polymer network (IPN) hydrogel composed of chitosan and polyallylamine exhibited electric‐sensitive behavior. The chitosan/polyallylamine IPN hydrogel was synthesized by radical polymerization using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The swelling behavior of the IPN was studied by immersion of the gel samples in aqueous NaCl solutions at various concentrations and pHs. The swelling ratio decreased with increasing concentration and pH of electrolyte solution. The stimuli response of the IPN hydrogel in electric fields was also investigated. When a swollen the IPN was placed between a pair of electrodes, the IPN exhibited bending behavior in response to the applied electric field. The IPN also showed stepwise bending behavior depending on the electric stimulus. In addition, thermal properties of the IPN were investigated by differential scanning calorimetry (DSC) and dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2290–2295, 2002     

Updating the trusted connection of re-organized computing resource under the automated system management platform

The High-Performance Computing (HPC) is an infrastructure to support various research fields. The research using HPC requires big storage for large-scale of raw data and the huge computing resources to analyze. The consolidated operations of the computing center for supporting various researches using HPC are a very effective organization. The consolidated operations are able to increase the utilization. The computing center has to be re-organized continuously in order to support the various fields of research effectively and flexibly. Re-organization to reuse the limited resources enforces the update of the information for verification of the computing resources after the re-allocation of computing resources and the re-distribution of trusted connection between computing resources. Consequently, to maintain effective research support we need automated resource re-organization environment. In this paper, we build an automated update of the trusted connection for re-organized computing resource using puppet which is automated system management platform. Finally, we provide a unified verification point and efficient environment for the re-allocation and re-organization of the integrated computing center.     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006     

The Effect of Aluminum Ions on the DC Etching of Aluminum Foil

A study has been made of the electrochemical etching of 99.99% aluminum foils at a current density of 50 mA cm^–2in AlCl₃–HCl solutions (1 m Cl^–) at 80 °C. The solutions were made by dissolving metallic aluminum into 1m HCl solution, to give a Cl^– concentration of 1 m. The number density of etch tunnels and the homogeneity of tunnel length decreased, and the mean pit size and its standard deviation increased with increasing Al³⁺ concentration. The results were discussed based on potential transients at a current density of 50 mA cm^–2, current–potential curves at a scan rate of 10 m Vs^–1 and electrochemical impedance spectra.     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

Characteristics of selective adsorption using D-phenylalanine imprinted terpolymer beads

A D-Phenylalanine (Phe) imprinted terpolymer, Polyacrylonitrile-Poly(acrylic acid)-Poly(acryl amide) (Poly(AN-AA-AAm)) bead was prepared by the wet-phase inversion method. Acrylamide (AAm) and acrylic acid (AA) were used as the functional monomer and acrylonitrile (AN) was used as a physical cross linker. The characteristics of selective adsorption by the D-Phe imprinted terpolymer beads were investigated at high concentrations of Phe racemate solution, 1 g Phe/L, and 10 g Phe/L. The adsorption selectivity of the D-Phe imprinted terpolymer beads prepared by anin-situ implanting method reached 0.82 and 0.8 at 1.0 g and 10 g Phe/L racemate solution, respectively, and almost all of the adsorbed D-Phe and about 43% of the adsorbed L-Phe were desorbed by 4% acetic acid. The uptake capacities of the terpolymer beads were maintained for several repeated batches.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry