Sterol metabolism in the opportunistic pathogen <Emphasis Type="Italic">Pneumocystis</Emphasis>: Advances and new insights

Pneumocystis can transiently colonize healthy individuals without causing adverse symptoms, and most people test positive for exposure to this organism early in life. However, it can cause Pneumocystis pneumonia (PcP) in people with impaired immune systems and is a major cause of death in HIV/AIDS. Although it has close affinities to the Ascomycetes, Pneumocystis has features unlike those of any single group of fungi. For example, Pneumocystis does not synthesize ergosterol, which is consistent with the inefficacy of amphotericin B and some triazoles in clearing PcP. Pneumocystis sterols include distinct Δ⁷ 24-alkylsterols. Metabolic radiolabeling experiments demonstrated that P. carinii synthesizes sterols de novo. Cholesterol is the most abundant sterol in Pneumocystis; most, if not all, is scavenged from the mammalian host lung by the pathogen. The P. carinii erg7, erg6, and erg11 genes have been cloned, sequenced, and expressed in heterologous systems. The recombinant P. carinii S-adenosyl-l-methionine:C-24 sterol methyl transferase (SAM:SMT) has a preference for lanosterol over zymosterol as substrate, and the enzyme can catalyze the transfer of either one or two methyl groups to the C-24 position of the sterol side chain. Two different sterol compositions were detected among human-derived P. jirovecii; one was dominated by C₂₈ and C₂₉ sterols, and the other had high proportions of higher molecular mass components, notably the C₃₂ sterol pneumocysterol. The latter phenotype apparently represents organisms blocked at 14α-demethylation of the sterol nucleus. These studies suggest that SAM:SMT is an attractive drug target for developing new chemotherapy for PcP.     

Effect of reactive diluents on properties of unsaturated polyester/montmorillonite nanocomposites

Unsaturated polyester (UP)/montmorillonite (MMT) nanocomposite was prepared by using hydroxypropylacrylate (HPA) as a reactive diluent instead of conventional styrene monomer and the effect of polarity of reactive diluent on properties of nanocomposite was investigated. X‐ray and mechanical test data indicated that mixing for an extended period of time is essential to enhance the physical properties of nanocomposites in the UP/Cloisite 6A system. This was attributed to the high polarity of HPA that may disturb the preintercalation of UP resin into the galleries of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 238–242, 2004     

Illuminant Aware Gamut‐Based Color Transfer

This paper proposes a new approach for color transfer between two images. Our method is unique in its consideration of the scene illumination and the constraint that the mapped image must be within the color gamut of the target image. Specifically, our approach first performs a white‐balance step on both images to remove color casts caused by different illuminations in the source and target image. We then align each image to share the same ‘white axis’ and perform a gradient preserving histogram matching technique along this axis to match the tone distribution between the two images. We show that this illuminant‐aware strategy gives a better result than directly working with the original source and target image's luminance channel as done by many previous methods. Afterwards, our method performs a full gamut‐based mapping technique rather than processing each channel separately. This guarantees that the colors of our transferred image lie within the target gamut. Our experimental results show that this combined illuminant‐aware and gamut‐based strategy produces more compelling results than previous methods. We detail our approach and demonstrate its effectiveness on a number of examples.     

Microstructure and Phase Stability of Yttria-Doped Tetragonal Zirconia Polycrystals Heat Treated in Nitrogen Atmosphere

The low-temperature degradation of zirconia (ZrO₂) that was doped with 3 mol% yttria (Y₂O₃) (3Y-TZP) was prevented by the heat treatment of sintered specimens in nitrogen. The heat treatment of sintered specimens resulted in a surface layer that was stabilized by nitrogen ions, whereas the interior was only slightly affected by the heat treatment. X-ray diffractometry and transmission electron microscopy analyses revealed that the stabilized surface layer consisted of cubic grains with tetragonal precipitates. Although the presence of the surface layer decreased the strength of the sintered 3Y-TZP, the strength of nitrified specimens was maintained when low-temperature annealing was applied.     

Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

Preparation of microporous chlorinated poly(vinyl chloride) membrane in fabric and the characterization of their pore sizes and pore‐size distributions

Chlorinated poly(vinyl chloride) (CPVC)/poly(vinyl pyrrolidone) (PVP) membranes were prepared by using the solvent system tetrahydrofuran (THF)/n‐butyl alcohol (n‐BA) to investigate the possibility of pore size and pore‐size distribution control. The coagulation of CPVC/PVP solution was induced by the exposure to water vapor at 25 (±0.5)°C. The average pore diameter, d_p, and the size distribution of pores on the surface of the membrane were quantified through the image analyzer from the images visualized by field emission scanning electron microscope (FE‐SEM). Surface pore size and distribution of the prepared CPVC/PVP membrane were strongly affected by the relative humidity (RH) in the environment and the content of PVP used as an additive. Particularly, in the case of CPVC membrane without PVP, the mean pore size was 0.15–0.2 μm, depending on the RH. The pore distribution became broad with the increase of the RH. The membranes had open pores as confirmed by the hydraulic permeation experiment. In addition, the water flux and membrane resistance (R_m) were greatly affected by the composition of polymer solution and the RH. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1195–1202, 2002     

Performance evaluation of electrodewatering system for sewage sludges

A laboratory-scale electrodewatering system, incorporating an electric field as an additional driving force to conventional pressure dewatering, has been developed to decrease the water content of sludges generated in wastewater treatment. Consisting of a piston-type filter press, a power supply and a data acquisition system, the electrodewatering system’s performance was evaluated as a function of applied pressure, applied voltage, sludge type and filtration time. Experiments were carried out using sewage sludges with the electric field up to 120 V/cm and pressure ranging from 98.1 to 392.4 kPa. Electrodewatering involving a combination of electric field and pressure enhances both the dewatering rate and final dewatered volume. The final water content of sewage sludges in the electrodewatering system can be reduced to 62 wt%, as compared to 78 wt% achieved with the pressure filtration alone. The electrodewatering system shows the potential to be an effective method for reducing the water content in sludges.     

Synthesis and characterization of poly(1,8-diethynylnaphthalene)

Summary The cyclopolymerization of 1,8-diethynylnaphthalene(DEN) and its copolymerization with diethyl dipropargylmalonate(DEDPM) were carried out by various transition metal catalysts. MoCl₅-based catalyst was found to be very effective and gave almost a quantitative polymer yield. The resulting dark-brown homopolymer(PDEN) was partially soluble in chloroform, tetrahydrofuran, and dimethyl sulfoxide, whereas copolymer (1:1) with number avaerage molecular weight of 2.1x10⁴ by GPC showed good solubility in those solvents. The structure of the polymers was analysed by IR, NMR, and UV-VIS spectroscopies. From the spectral and solubility data, it is proposed that cyclized products with the conjugated system are formed. Room temperature conductivities of the I₂-doped homo and copolymer were found to be about 7.5x10^-3 and 5.1x10^-3 S/cm, respectively.     

Fabrication of SiO2-ZrO2 composite fiber mats via electrospinning

(1 − x)SiO₂-(x)ZrO₂ (x = 0.1, 0.2) composite fiber mats were prepared by electrospinning their sol-gel precursors of zirconium acetate and tetraethyl orthosilicate (TEOS) without using a polymer binder. The electrospun composite fibers were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FT-IR) and mercury porosimetry. The composite fibers having a tetragonal crystalline ZrO₂ were obtained by calcining the electrospun composite fibers at high temperatures. The results show that the structure and crystallization of ZrO₂ in the composite fibers can be controlled by sintering temperature, while the porosity and morphology of the fiber mats did not depend on the sintering temperature.     

Aboveground nitrogen in relation to estimated total plant uptake in maize and bean

The main objective of this field study was to estimate the total plant uptake of soil mineral N in maize (Zea mays L.) and common bean (Phaseolus vulgaris L.) grown in crop rotations under different N content in Nicaragua. Secondary objectives were to estimate the fraction of the measured soil mineral N content taken up in this way, and to determine how the measured N in plant aboveground parts was related to the total mineral N uptake. A large variation in N content was obtained by using data from fertilisation experiments. Plant total N uptake was estimated as the residual N in a mass balance calculation of soil mineral N. Mineral N content in the top 0–0.3 m soil layer in the field cultivations and in tubes isolated from root uptake, and N content in aboveground plant parts were measured every 30 days. Estimated plant total uptake of soil mineral N varied considerably (2.5–14 g N m⁻² 30 day⁻¹) over periods and N treatments. The range of variation was similar for maize and bean. The fraction of the soil mineral N that was taken up by the plant daily varied more in maize (about 0.03–0.12 day⁻¹) than in bean (about 0.05–0.08 day⁻¹). Our results suggest that monthly changes in N in aboveground plant parts were linearly related to plant total N uptake during the same period. Aboveground plant N constituted between about 55% and 80% of total uptake of soil mineral N in maize depending on period within season, whereas for bean it was more constant and smaller (about 40%).