Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Microstructure and Softening of Laser-Welded 960 MPa Grade High Strength Steel Joints

The microstructural evolution of laser-welded 960 MPa grade high strength steel joints and its effect on softening behavior of heat affected zone (HAZ) were investigated in this paper. The results show that microstructure of HAZ and fusion zone (FZ) is composed of lath martensite and bainitic ferrite. The microstructure of mixed grained zone presents strip-like characteristics and small block martensite distributes along the grain boundary. The grain size near the fusion line is about 25 μm, and the grain size in the fine grain zone is less than 5 μm. Microhardness of HAZ and FZ is lower than base metal. The soft zone locates in transitional region between tempering zone and mixed grained zone due to the interaction of the martensite tempering and the recovery and recrystallization of the rolled microstructure. Microhardness of soft zone is 310 HV and drops 18% compared to base material. Welding heat input has a remarkable effect on the width of soft zone and microhardness. The tensile properties of weld joints are closely related to the softening behavior of HAZ.     

Morphologies of carbon micro-coils grown by chemical vapor deposition

The carbon micro-coils were obtained by the Ni-catalyzed pyrolysis of acetylene. The carbon micro-coils with various coiling morphology: regular double coils, coils built up by circular or flat fibers, super helix coils, single coils, etc. can be observed. The carbon coils with various coil diameters and coil pitches were obtained by controlling reaction conditions, such as reaction temperature, source gas flow rate of sulfur-impurity, acetylene or hydrogen.     

Synthesis of thermosensitive copolymer beads containing pyridinium groups and their antibacterial activity

Thermosensitive 4VP‐NIPAAm‐4G copolymer beads containing pyridyl groups were first prepared by suspension copolymerization of 4‐vinylpyridine (4VP), N‐isopropylacrylamide(NIPAAm), and tetraethylene glycol dimethacrylate (4G; crosslinking reagent) in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃ as dispersants. Then the copolymer beads containing pyridinium groups were obtained by the quaternization of the copolymer beads with various alkyl iodides (CH₃I, C₄H₉I, C₈H₁₇I) in N,N‐dimethylformamide. The 4VP‐NIPAAm‐4G (15 : 97 : 3) copolymer bead and the 4VP‐NIPAAm‐4G copolymer beads quaternized with butyl iodide exhibited high thermosensitivity in water, although the 4VP‐NIPAAm‐4G copolymer beads quaternized with methyl iodide or octyl iodide hardly exhibited thermosensitivity. All the quaternized copolymer beads exhibited antibacterial activity against Escherichia coli (E. coli), although the 4VP‐NIPAAm‐4G copolymer bead did not. In particular, the copolymer bead quaternized with butyl iodide exhibited the highest antibacterial activity against E. coli at 30°C. It was also found that the antibacterial activity of the quaternized 4VP‐NIPAAm‐4G copolymer beads was greatly affected by not only chain length of alkyl groups in alkyl iodides, with which the 4VP‐NIPAAm‐4G copolymer beads were quaternized, but also by temperature of the solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Chaotic transport in antidot lattices

A review is given of quantum effects and roles of chaos in transport in antidot lattices mainly from a theoretical point of view. The topics include diffusive orbits combined with a magnetic focusing effect as the origin of the commensurability peaks, semiclassical quantization of periodic orbits as the origin of the Aharonov-Bohm type oscillation superimposed, and the importance of inherent disorder in the antidot potential itself.     

Electrolyte properties of 1-alkyl-2,3,5-trimethylpyrazolium cation-based room-temperature ionic liquids for lithium secondary batteries

The physicochemical and electrochemical properties of three 1-alkyl-2,3,5-trimethylpyrazolium cation-based room-temperature ionic liquids with various alkyl chain lengths were investigated. The temperature dependences of density, viscosity, and ionic conductivity were obtained by precise measurements. Electrolyte properties of these room-temperature ionic liquids were also examined from the viewpoint of their uses in lithium secondary batteries ([LiCoO₂ positive electrode|electrolyte|lithium metal negative electrode]). It was found that the alkyl chain length affects the charge–discharge performances of cells.     

Social modification using implementation of partial agency toward objects

This article considers what kind of partial agency can be implemented for objects to bring about better agencies for interacting with humans. We humans have the ability to inform our fellows about our intentions, internal states, and requirements through verbal means, gestures, attitudes, timings, and other representations. These representations help us to maintain our belief that we are sufficient agents. Robots and virtual agents also mimic these representations; they act as if they have such an agency. However, their agencies are sometimes too excessive compared to their task. This mismatch leads to a high cognitive load being placed on users and consequently leads to breakdowns in interaction; it prevents human-agent interaction from being a modality in certain applications. We have devised an agency with multiple selectable features. We believe that selectable features promote good designs of virtual agents, robots, machinery, and home appliances according to their intended traits. We categorized these agencies into several groups and discuss what elements lead to these features. The article also describes a method of identifying these features in human behavior.     

Liquidus and solidus temperatures of Ni-solid solution in Ni-Al-X (X: V, Nb and Ta) ternary systems

A systematic investigation was carried out to determine both liquidus and solidus surfaces of the Ni-solid solution (γ) in the Ni-Al-X ternary phase diagrams successively by differential thermal analysis (DTA) technique. Each of the Group V elements of the periodic table, V, Nb, and Ta, was chosen as a ternary additive X in the present study. The γ-solvus was also taken into account in determining a temperature range for a solid solution treatment above the γ-solvus, i.e., “the window,” as well as the maximum solubility limit of γ-Ni solid solution.     

Optical and electrical anisotropies of polydiacetylene derivative film aligned by shear stress

The molecular alignment of polydiacetylene (PDA) derivatives and their optical and electrical properties of thin films based on PDA derivatives have been studied. The PDA derivatives were aligned depending on the direction of applied shear stress in the film. From measurements of the polarized absorption and current–voltage characteristics, the optical and electrical anisotropies have been observed, that was discussed by taking the PDA main chain alignment into consideration.