Diffusion of silicon in aluminum

Interdiffusion coefficients in Al-Si alloys were determined by Matano’s method in the tem-perature range from 753 to 893 K with the couple consisting of pure aluminum and an Al-Si alloy. Temperature dependence of the impurity diffusion coefficients of Si in Al, obtained by extrapolation of the concentration dependence of the interdiffusion coeffi-cient to zero mole fraction of Si, is given by the following equation: DSi/Al = (2.02^+0.97 _-0.66 × 10^-4 exp [-(136 ±3) kJ mol^-1/RT] m²/s. p ] The Kirkendall marker was found to move toward the Si-rich side, indicating that the Si atom diffuses faster than the Al atom in Al-Si alloys. From the interdiffusion coeffi-cient and the marker shift, the intrinsic diffusion coefficients were calculated. The difference in the activation energies (ΔQ) between the impurity diffusion of Si in Al and the self-diffusion of Al was estimated by means of the asymptotic oscillating po-tential and the Le Claire theory. The calculated value of ΔQ is in fair agreement with the experimental value. The vacancy-solute binding energy for Si in Al was also dis-cussed based on the diffusion data. formerly Undergraduate Student, Tohoku University     

Production of arachidonic acid by filamentous fungus, Mortierella alliacea strain YN-15

A filamentous fungus producing significant levels of arachidonic acid (AA, C20∶4n−6) was isolated from a freshwater pond sample and assigned to the species Mortierella alliacea. This strain, YN-15, accumulated AA mainly in the form of triglyceride in its mycelia. An optimized culture in 25 L of medium containing 12% glucose and 3% yeast extract yielded 46.1 g/L dry cell weight, 19.5 g/L total fatty acid, and 7.1 g/L AA by 7-d cultivation in a 50-L jar fermenter. Assimilation of soluble starch by YN-15 was notably enhanced by the addition of oleic acid, soybean oil, ammonium sulfate, or potassium phosphate to a starch-based medium. Using starch as a main carbon source in the pre-pilot scale cultivation improved the production of AA by up to 5.0 g/L. Mortierella alliacea strain YN-15 is therefore a promising fungal isolate for industrial production of AA and other polyunsaturated fatty acids.     

Load dependence of sticking-domain distribution in two-dimensional atomic scale friction of NaF(100) surface

Remarkable transitions were found in atomic-scale friction-images of the NaF(100) surface and the corresponding sticking-domain distribution by detailed investigation of the load dependence using the two-dimensional frictional force microscope. The tip-position map reveals a new type of sticking-domain distribution pattern, which is different from the simple lattice periodicity.     

A Study of Difference in Reflow Characteristics Between Electroplated and Sputtered Cu in a Dual-Damascene Fabrication Process for Silicon Semiconductor Devices

The difference in reflow characteristics between electroplated and sputtered Cu films during high-temperature high-pressure treatment was confirmed, and the basis for this difference was analyzed. Using test element groups containing a number of via holes, it was found that electroplated Cu films had much superior embedding characteristics compared with sputtered Cu films. This was confirmed by measurements of the stress–strain curves of these Cu films, which indicated that the strength at high temperature of the electroplated films was lower than that of sputtered films. Identification of lattice defects and analysis of the microstructure of these films were carried out by positron lifetime measurements and transmission electron microscopy, respectively. The results showed that a large quantity of vacancy clusters was present in the electroplated Cu films, and this increased to a maximum after isochronal annealing at 300°C. From the results, it was shown that Cu atoms in electroplated films with a large number of vacancy clusters diffuse rapidly at around 300°C, and this rapid diffusion contributes greatly to softening of the film and a promotion in reflow behavior. This study revealed that the reflow behavior of Cu films strongly depends on the presence of vacancy clusters within it.     

States of water absorbed in water-borne urethane/epoxy coatings

The water absorption properties of water-borne urethane/epoxy coatings are studied using differential scanning calorimetry (DSC) and attenuated total reflectance Fourier transform IR spectroscopy (ATR FTIR) to estimate the methods of interaction between the water and coating. DSC and ATR FTIR are used to categorize water into states based unique and easily identifiable differences in DSC and ATR FTIR measurements. DSC states (Strong, Weak 1, Weak 2, and Free) and ATR FITR states (S₀, S₁, and S₂) appear to correspond to the relative strength of the interaction and the degree of hydrogen bonding between the water and the polymer network, respectively. The dynamics and relative population of each state are estimated with the most populous states being Strong and S₁ in urethane, and Strong and S₂ in epoxy. Finally six active functional groups within the coating appear to form strong hydrogen bonds with water, and one functional group appears to form weak dipole bonds.     

Hydrogen storage and thermal conductivity properties of Mg-based materials with different structures

Mg-based hydrogen storage materials can be very promising candidates for stationary energy storage application due to the high energy density and low cost of Mg. Hydrogen storage kinetics and thermal conductivity are two important factors for the material development for this kind of application. Here we studied several types of Mg-based materials with different structure-micrometer scale Mg powders, Mg nanoparticles, single crystal Mg, nanocrystalline Mg₅₀Co₅₀ BCC alloy and Mg thin film samples. It seems the Mg materials with good kinetics usually are the ones with nanostructure and tend to show poor thermal conductivity due to electron/phonon scattering resulting from more interfaces and boundaries in nanomaterials. Based on this work, good crystallinity Mg phase incorporated in carbon nano framework could be one promising option for energy storage.