Identification of Ustilago cynodontis as a new producer of glycolipid biosurfactants, mannosylerythritol lipids, based on ribosomal DNA sequences

Mannosylerythritol lipids (MELs) are one of the most promising glycolipid biosurfactants known because of their multifunctionality and biocompatibility. The search for novel producers of MELs was undertaken based on the analysis of ribosomal DNA sequences on basidiomycetous yeasts. The bermuda grass smut fungus Ustilago cynodontis NBRC 7530, which taxonomically relates to Pseudozyma shanxiensis known as a MEL-C producer, was found to accumulate glycolipids in the cultured medium. Under a shake flask culture with soybean oil, the amount of the glycolipids was 1.4 g/L for 7 days at 25 degrees C. As a result of the structural characterization, the main glycolipids was identified as 4-O-[(4'-O-acetyl-3'-O-alka(e)noyl-2'-O-butanoyl)-beta-D-mannopyranosyl]-D-erythritol, and the major fatty acids were C(14) and C(16) ones. The glycolipid was highly hydrophilic MEL-C, and very similar to those produced by P. shanxiensis. The fungi of the genus Ustilago are thus likely to be potential producers of MELs as well as the yeasts of the genus Pseudozyma.     

Packing density of glycolipid biosurfactant monolayers give a significant effect on their binding affinity toward immunoglobulin G

Mannosylerythritol lipid-A (MEL-A) is one of the most promising glycolipid biosurfactants, and abundantly produced by Pseudozyma yeasts. MEL-A gives not only excellent self-assembling properties but also a high binding affinity toward human immunoglobulin G (HIgG). In this study, three kinds of MEL-A were prepared from methyl myristate [MEL-A (m)], olive oil [MEL-A (o)], and soybean oil [MEL-A (s)], and the effect of interfacial properties of each MEL-A monolayer on the binding affinity toward HIgG was investigated using surface plasmon resonance (SPR) and the measurement of surface pressure (pi)-area (A) isotherms. Based on GC-MS analysis, the main fatty acids were C(8) and C(10) acids in all MEL-A, and the content of unsaturated fatty acids was 0% for MEL-A (m), 9.1% for MEL-A (o), 46.3% for MEL-A (s), respectively. Interestingly, the acid content significantly influenced on their binding affinity, and the monolayer of MEL-A (o) gave a higher binding affinity than that of MEL-A (m) and MEL-A (s). Moreover, the mixed MEL-A (o)/ MEL-A (s) monolayer prepared from 1/1 molar ratio, which comprised of 27.8% of unsaturated fatty acids, indicated the highest binding affinity. At the air/water interface, MEL-A (o) monolayer exhibited a phase transition at 13 degrees C from a liquid condensed monolayer to a liquid expanded monolayer, and the area per molecule significantly expanded above 13 degrees C, while the amount of HIgG bound to the liquid expanded monolayer was much higher than that bound to liquid condensed monolayer. The binding affinity of MEL-A toward HIgG is thus likely to closely relate to the monolayer packing density, and may be partly controlled by temperature.     

Identification of Pseudozyma graminicola CBS 10092 as a producer of glycolipid biosurfactants, mannosylerythritol lipids

A basidiomycetous yeast, Pseudozyma graminicola CBS 10092, was found to accumulate a large amount of glycolipids in the cultured medium when grown on soybean oil as the sole carbon source. Based on thin layer chromatography, the extracellular glycolipids gave spots corresponding to those of mannosylerythritol lipids (MELs), which are highly functional and promising biosurfactants. From the structural characterization by 1H and 13C NMR, the main product was identified as 4-O-[(4'-mono-O-acetyl-2', 3'-di-O-alka(e)noyl)-beta-D-mannopyranosyl]-D-erythritol, which is a highly hydrophilic derivative of MELs known as MEL-C. According to high-performance liquid chromatography analysis, the main product, MEL-C, comprised approximately 85% of all the MELs, and the total amount reached approximately 10 g/L for 7 days. The fatty acids of the present MEL-C consisted of mainly C6, C8 and C14 acids, considerably different from those of MEL-C produced by other Pseudozyma strains such as P. antarctica and P. shanxiensis. The observed critical micelle concentration (CMC) and the surface-tension at CMC of the MEL-C were 4.0 x 10(-6) M and 24.2 mN/m, respectively, while those of MEL-A, the most intensively studied MEL, were 2.7 x 10(-6) M and 28.4 mN/m, respectively. This implied that the MEL-C has higher hydrophilicity than conventional MELs hitherto reported. In addition, on a water-penetration scan, the MEL-C efficiently formed the lamella phase (Lalpha) at a wide range of concentrations, indicating its excellent self-assembling properties. From these results, the newly identified MELs produced by P. graminicola are likely to have great potential for use in oil-in-water type emulsifiers and/or washing detergents, and would thus facilitate a broad range of applications for the promising yeast biosurfactants.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Synthesis of deoxy(thiosulfato)chitin as the precursor for noncatalytic photoinduced graft copolymerization

Photoinduced graft copolymerization of vinyl monomers onto deoxy(thiosulfato)chitin (S₂O₃–chitin) has been studied. Chitin was first tosylated and subsequently transformed into S₂O₃–chitin. S₂O₃–chitin has good solubility over tosyl–chitin. Graft copolymerization of S₂O₃–chitin proceeded very easily by ultraviolet irradiation without catalyst. Photolysis of S₂O₃ groups was confirmed by infrared spectra. But the photolysis occurred only in quartz, not in a Pyrex tube. Methyl methacrylate (MMA) and acrylonitrile showed good grafting activities. In the case of acrylic acid and acryl amide, homopolymer formation was predominant, and the degree of grafting was low. We chose the MMA monomer for further information. The grafting rate of S₂O₃–chitin using MMA was much faster than those of chitin and O‐acetyl–chitin. Under the appropriate conditions, the degree of grafting reached 600% only in 2 h, and the grafting efficiency was over 75% in any monomer concentration. But addition of DMSO into the polymerization system decreased the degree of grafting. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 189–195, 1999     

Salmonella prevalence in seafood imported into Japan

A total of 353 samples of 29 types of seafood were tested for Salmonella prevalence and total microbial population. Salmonella enterica serotype Weltevreden was isolated from 2 of 47 black tiger prawn samples. The contamination levels of Salmonella were in a range of <30 to 40 most probable number per 100 g. In addition, one sample of black tiger prawns and two samples of white shrimp were positive for Salmonella invA gene on PCR assay. Although the mean aerobic bacterial count was greater than 4 log CFU/g in most of the sample types, those in the two Salmonella-isolated samples of black tiger prawn were 7.48 and 5.18 log CFU/g, respectively. These results indicate the possibility that shrimp and prawns contribute to foodborne infections. The improvement of seafood quality is an important issue, and the information on contamination by pathogens should be provided as feedback to the originating country, with the aim of increasing safety.     

Antibacterial activity of Bacillus amyloliquefaciens phage endolysin without holin conjugation

To characterize the enzymatic activity and antibacterial activity of endolysin encoded by a Bacillus amyloliquefaciens phage, the open reading frame encoding endolysin was amplified by PCR and cloned into the expression plasmid pET21d(+). The resultant plasmid was used to transform Escherichia coli JM109(DE3). Production of endolysin in the cytosol facilitated cell lysis without coproduction of holin, which is considered to degrade or alter the cytoplasmic membrane. The phage endolysin was overexpressed and purified. Although the specific activity of the purified phage endolysin towards lyophilized Micrococcus luteus cells was 1/11 of the activity of chicken egg white lysozymes, the endolysin showed stronger antibacterial activity towards E. coli W3110, E. coli JM109(DE3) and Pseudomonas aeruginosa PAO1 than chicken egg white lysozymes. The antibacterial activity of the endolysin towards these three bacterial strains was marked when EDTA was added to the endolysin solution.     

Effects of physical-chemical characteristics on the sorption of selected endocrine disruptors by dissolved organic matter surrogates

Sorption coefficients (K(oc) values) of selected endocrine disruptors for a wide variety of dissolved organic matter (DOM) were measured using fluorescence quenching and solubility enhancement. 17beta-Estradiol, estriol, 17alpha-ethynylestradiol, p-nonylphenol, p-tert-octylphenol, and dibutylphthalate were selected as endocrine disruptors. Aldrich humic acid, Suwannee River humic and fulvic acids, Nordic fulvic acid, alginic acid, dextran, and tannic acid were selected as DOM surrogates. The resulting sorption coefficients (log K(oc)) were independent of octanol-water partitioning coefficients (log K(ow)) of the selected endocrine disruptors, indicating the hydrophobic interaction is not the predominant sorption mechanism. Moreover, the K(oc) values for the selected endocrine disruptors, especially the steroid estrogens, correlated much better with UV absorptivity at 272 nm (A272) and phenolic group concentration of the DOM than with either the H/O or the (O+N)/C atomic ratio of the DOM. This suggests that the sorption mechanism is closely related to the interaction between pi-electrons and the hydrogen bonds, i.e., the affinity between phenolic groups of the steroid estrogens and DOM is suggested to provide a relatively large contribution to the overall sorption and yield the K(oc) values of the steroid estrogens as high as those of the alkylphenols and dibutylphthalate, which are suggested to be dominated by nonspecific hydrophobic interaction.     

Characterization of E- and Z-ajoene obtained from different varieties of garlics

Synthesised E- and Z-ajoene were used to determine their amounts in food oils containing various fresh garlics. The best yield of E-ajoene (172.0 μg/g of garlic) and Z-ajoene (476.0 μg/g of garlic) was obtained from freshly prepared Japanese garlic with rice oil which was heated at 80 °C. Determination of E- and Z-ajoene from soybean oil containing 15% Japanese garlic samples prepared at 80 °C for 0.5 h gave the amount of E-ajoene (170.0 μg/g of garlic) and Z-ajoene (127.0 μg/g of garlic). After 9-month storage, 54.0% E- and 11.0% Z-ajoene remained in Japanese garlic with rice oil. Ajoene (0.1 mM) in ethyl acetate was incubated under UV-light (253.7 nm) for 3 days, 81.7% E- and 56.9% Z-ajoene remained. 4.3% and 0.5% E- and Z-ajoene remained when ajoene (0.1 mM in ethyl acetate) was incubated at 100 °C.     

A new technique for large-area thin film CdS/CdTe solar cells

The atmospheric pressure CSS method has been developed as a reproducible and efficient process. Thin film CdTe grown under atmospheric pressure has a rough surface morphology. The density of carbon black powder in the graphite carbon paste for screen printing is a key factor in reducing the series resistance of the device with rough surface CdTe. Using graphite carbon paste with 7 wt% carbon black powder has resulted in cells with a relatively low back contact resistance. A highly efficient large-area CdS/CdTe solar cell (11.0%, 5327 cm²) sub-module has been fabricated using the new technique.