Plant Growth Inhibition By <Emphasis Type="Italic">Cis</Emphasis>-Cinnamoyl Glucosides and <Emphasis Type="Italic">Cis</Emphasis>-Cinnamic Acid

Spiraea thunbergii Sieb. contains 1-O-cis-cinnamoyl--_d-glucopyranose (CG) and 6-O-(4-hydroxy-2-methylene-butyroyl)-1-O-cis-cinnamoyl--_d-glucopyranose (BCG) as major plant growth inhibiting constituents. In the present study, we determined the inhibitory activity of CG and BCG on root elongation of germinated seedlings of lettuce (Lactuca sativa), pigweed (Amaranthus retroflexus), red clover (Trifolium pratense), timothy (Phleum pratense), and bok choy (Brassica rapa var chinensis) in comparison with that of two well-known growth inhibitors, 2,4-dichlorophenoxyacetic acid (2,4-D) and (+)-2-cis-4-trans-abscisic acid (cis-ABA), as well as two related chemicals of CG and BCG, cis-cinnamic acid (cis-CA) and trans-cinnamic acid (trans-CA). The EC₅₀ values for CG and BCG on lettuce were roughly one-half to one-quarter of the value for cis-ABA. cis-Cinnamic acid, which is a component of CG and BCG, possessed almost the same inhibitory activity of CG and BCG, suggesting that the essential chemical structure responsible for the inhibitory activity of CG and BCG is cis-CA. The cis-stereochemistry of the methylene moiety is apparently needed for high inhibitory activity, as trans-CA had an EC₅₀ value roughly 100 times that of CG, BCG, and cis-CA. Growth inhibition by CG, BCG, and cis-CA was influenced by the nature of the soil in the growing medium: alluvial soil preserved the bioactivity, whereas volcanic ash and calcareous soils inhibited bioactivity. These findings indicate a potential role of cis-CA and its glucosides as allelochemicals for use as plant growth regulators in agricultural fields.     

Radio propagation characteristics due to rain at 20-GHz band

Measurements of 20-GHz radio wave rainfall attenuation and cross-polarization discrimination due to rain have been conducted since July 1971 in Tokyo. There was a high correlation between rainfall attenuation and cross-polarization discrimination. Rainfall attenuation of 45 dB caused cross-polarization discrimination of 12 dB.     

Biological evaluation of mechanically deboned chicken meat protein quality

Mechanically deboned chicken meat (MDCM) is a meat product obtained by crushing tissues after meat removal and is largely used in meat products. Protein quality of flour prepared from defatted MDCM and from fresh chicken breast meat (FCBM) was chemically and biologically evaluated by rat growth and nitrogen balance studies. Proximate chemical composition, on a dry basis, of MDCM and FCBM showed protein contents of 90.5% and 82.2%, lipid contents of 3.0% and 13.2% and ash contents of 6.1% and 4.2%, respectively. There was a relatively good balance of essential amino acids in both samples although lysine was in low concentration in MDCM being a limiting amino acid. Feeding of flour diets resulted in high protein efficiency ratio, a high net protein utilization and high nitrogen balance, thus showing a high biological value and also high true digestibility and, consistently, NPU for both samples is similar to casein.     

Characterization and on-line monitoring of cell disruption and lysis using dielectric measurement

The dielectric measurement of Escherichia coli suspension was carried out between 0.01 and 100 MHz during cell disruption using a physical method or cell lysis induced by chemicals for the purpose of on-line monitoring of cell disruption or lysis of bacterial cells. The dielectric dispersion of relative permittivity centered at about 1.4 MHz and the dielectric parameters based on the fitting calculation well reflected the damage of these cells under physical and chemical stresses. The degree of cell disruption as determined by the dielectric parameters, the amplitude of dispersion and the conductivity, well corresponded to those obtained by other conventional kinetic analyses. This methodology can be utilized for the on-line monitoring of physical cell disruption and cell lysis induced by detergent and could provide direct information to control these processes. Based on these results, the dielectric measurement was successfully applied to monitor the stress-mediated cultivation of E. coli cells.     

RADIOLYSIS OF DIISODECYL PHOSPHORIC ACID AND ITS EFFECT ON THE EXTRACTION OF NEPTUNIUM

Radiolysis of diisodecyl phosphoric acid (DIDPA) in n-dodecane containing tributyl phosphate (TBP) was examined by analyzing concentrations of acidic extractants and H₃PO₄, and its effect on the extraction of neptuniua was studied froi the aspect of the extraction rate. For the solvent containing 0.5 fi DIDPA and 0.1 1 TBP Irradiated in the absence of HNO₃, G-values for degradation of DIDPA and for production of dibutyl phosphoric acid (DBP)were found to be 0.47 and 0.14, respectively. For the solvent irradiated in stationary contact with 0.5 M HNO3, G-value for DIDPA degradation was found to be 0.78, which ras 1.7 tines larger than the value for the solvent irradiated in the absence of HNO₃.     

Prevalence of Arcobacter species in retail meats and antimicrobial susceptibility of the isolates in Japan

A survey was conducted to examine the prevalence of Arcobacter species among meat samples and to investigate the antimicrobial susceptibility of the isolates in Japan. In 1998 and 1999, samples of beef (n=90), pork (n=100) and chicken meat (n=100) were purchased from seven retail shops. Arcobacter species were isolated from 2.2%, 7.0% and 23.0% of beef, pork and chicken meat samples, respectively. The rate of isolations in chicken meats was shown to be significantly higher than those of beef and pork. Species-specific polymerase chain reaction (PCR) demonstrated that the most dominant Arcobacter species was Arcobacter butzleri among the isolates examined. Multiple contaminations with different Arcobacter species were observed in 5% of the chicken samples. Almost all the strains tested showed resistance to vancomycin (100%) and methicillin (97.5%). Strains resistant to cephalothin, sulfamethoxazole–trimethoprim, nalidixic acid and chloramphenicol were detected at the rate of 81.1%, 67.2%, 53.5% and 24.6%, respectively. All Arcobacter strains examined were susceptible to ampicillin, tetracycline, streptomycin and kanamycin.     

XANES Study on the Evolution Among Different Copper Species, CuI, CuII and CuIII, in CuBa2YCu2O6+z Upon Oxygen Loading

X-ray absorption near-edge structure (XANES) spectroscopy at the Cu L-edge is applied to follow the gradual formation of Cu^II and Cu^III species from the Cu^I species with increasing amount of excess oxygen, z, in Cu(1)Ba₂YCu(2)₂O_6+z . For the study, a series of samples with precisely controlled oxygen contents was prepared utilizing the temperature-controlled oxygen-depletion (TCOD) annealing technique in the sample synthesis and employing coulometric titration for accurate oxygen-content analysis. It may be concluded that at low amounts of excess oxygen, z, Cu(1)^I in the charge-reservoir tends to be first oxidized to Cu(1)^II rather than directly to Cu(1)^III, suggesting that complete chain formation does not occur at low oxygen contents.     

High-strain-rate superplasticity in oxide ceramics

Factors limiting the strain rate of superplastic deformation in ceramic materials are discussed on the basis of existing models and experimental results concerning high-temperature plastic deformation, intergranular cavitation and dynamic grain growth. From the discussion, it is indicated that simultaneously fulfilling the following conditions is essential for attaining high-strain-rate superplasticity (HSRS) in ceramic materials: reduction in the initial grain size, enhanced diffusivity, suppressed dynamic grain growth, a homogeneous microstructure and a reduced number of residual defects. In the light of these conditions, explanations are given for HSRS attained in earlier studies on some oxide materials. It is also shown that HSRS can be intentionally attained in doped yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) and composites synthesized from ZrO₂, Al₂O₃ and MgO₂; the tensile ductility of these composites reached 300–2500% at a strain rate of 0.01–1.0 s^?1. The postdeformation microstructure indicates that some secondary phases may suppress cavitation damage and thereby enhance HSRS.     

Terahertz imaging system based on a backward-wave oscillator

We present an imaging system designed for use in the terahertz range. As the radiation source a backward-wave oscillator was chosen for its special features such as high output power, good wave-front quality, good stability, and wavelength tunability from 520 to 710 GHz. Detection is achieved with a pyroelectric sensor operated at room temperature. The alignment procedure for the optical elements is described, and several methods to reduce the etalon effect that are inherent in monochromatic sources are discussed. The terahertz spot size in the sample plane is 550 microm (nearly the diffraction limit), and the signal-to-noise ratio is 10,000:1; other characteristics were also measured and are presented in detail. A number of preliminary applications are also shown that cover various areas: nondestructive real-time testing for plastic tubes and packaging seals; biological terahertz imaging of fresh, frozen, or freeze-dried samples; paraffin-embedded specimens of cancer tissue; and measurement of the absorption coefficient of water by use of a wedge-shaped cell.     

Preparation of carbon alloy catalysts for polymer electrolyte fuel cells from nitrogen-containing rigid-rod polymers

‘Carbon Alloy Catalysts’ (CAC), non-precious metal catalysts for the oxygen reduction reaction (ORR), were prepared from various kinds of nitrogen-containing rigid-rod aromatic polymers, polyimides, polyamides and azoles, by carbonization at 900 °C under nitrogen flow. The catalytic activity for ORR was evaluated by the onset potential, which was taken at a current density of −2 μA cm⁻². Carbonized polymers having high nitrogen content showed higher onset potential. In particular, CACs derived from azole (Az5) had an onset potential of 0.8 V, despite being was prepared without any metals.