Modeling and simulation of joint clearance effects on mechanisms having rigid and flexible links

In this study, kinematic and dynamic characteristics of a planar four-bar mechanism having joint clearance and link flexibility are investigated. Assuming that joint clearance as a virtual massless link, artificial clearances are developed at crank-coupler and coupler-follower joints. Contact model in joints with clearance is established using the nonlinear spring-damper model and the friction effect is considered using the Coulomb friction model. Then the simulation is implemented and the kinematic and dynamic characteristics of model mechanism are investigated. The computational methodology can predict the effects of clearance on planar mechanism having rigid and flexible links. The results are evaluated for the case of stationary phase, and naturally show that extreme values occur in output of the mechanism with clearances. Due primarily to the suspension effect of the flexible link, values of these peaks in the flexible mechanism decrease relative to that of the rigid mechanism. In addition, the flexibility has a significant effect on the vibration response of the mechanism with joint clearance.     

Revised stratigraphy of the Tertiary deposits of Istanbul and their engineering properties

For over 50 years, the Upper Oligocene–Upper Miocene sedimentary sequence in Istanbul has been considered to be formed of two distinct sequences separated by an unconformity. However, recent field observations and an analysis of numerous borehole data indicate the Gürp?nar, Çukurçe?me and Güngören Formations are in fact a single sequence of alternating clay–sand/sandstone beds/lenses, here named the Avc?lar Formation. The Bak?rköy Formation, which is typically composed of carbonate rocks, conformably overlies the Avc?lar Formation. The paper provides the geotechnical parameters of the units within the Avc?lar Formation which it is hoped will facilitate selecting suitable geotechnical and engineering geological parameters to represent the deposits and minimize errors in the interpretation/evaluation of in-situ conditions.     

Acute toxicity removal in textile finishing wastewater by Fenton's oxidation, ozone and coagulation-flocculation processes

This study evaluates the effectiveness of Fenton's oxidation (FO) process and ozone (O3) oxidation compared with a coagulation-flocculation (CF) process to remove effluent toxicity as well as colour and COD from a textile industry wastewater. Daphnia magna was used to test acute toxicity in raw and pre-treated wastewater. The operational parameters for each process were determined on the basis of complete toxicity removal. The FO process removed COD at a higher rate (59%) than O3 (33%) while colour removal was similar (89% and 91%, respectively). The CF process removed both COD and colour at rates similar to the FO process. A colour range of 150-250 platin-cobalt (Pt-Co) unit was assessed for toxicity.     

Current-Oscillation Power Growth in a Semiconductor Superlattice with Regard to Interminiband Tunneling

The total power of oscillations of current flowing through a semiconductor superlattice with different gaps between the first and second minibands is discussed. It is demonstrated that, with a decrease in the band gap, i.e., with an increase in the probability of interminiband tunneling, the total current-oscillation power increases when certain voltages are applied to the superlattice.     

Kinetics of para-nitrophenol and chemical oxygen demand removal from synthetic wastewater in an anaerobic migrating blanket reactor

A laboratory scale anaerobic migrating blanket reactor (AMBR) was operated at different HRTs (1-10.38 days) in order to determine the para-nitrophenol (p-NP) and COD removal kinetic constants. The reactor was fed with 40 mg L(-1)p-NP and 3000 mg L(-1) glucose-COD. Modified Stover-Kincannon and Grau second-order kinetic models were applied to the experimental data. The predicted p-NP and COD concentrations were calculated using the kinetic constants. It was found that these data were in better agreement with the observed ones in the modified Stover-Kincannon compared to Grau second-order model. The kinetic constants calculated according to Stover-Kincannon model are as follows: the saturation value constant (K(B)) and maximum utilization rate constants (R(max)) were found as 31.55 g CODL(-1)day(-1), 29.49 g CODL(-1)day(-1) for COD removal and 0.428 g p-NPL(-1)day(-1), 0.407 g p-NPL(-1)day(-1) for p-NP removal, respectively (R(2)=1). The values of (a) and (b) were found to be 0.096 day and 1.071 (dimensionless) with high correlation coefficients of R(2)=0.85 for COD removal. Kinetic constants for specific gas production rate were evaluated using modified Stover-Kincannon, Van der Meer and Heerrtjes and Chen and Hasminoto models. It was shown that Stover-Kincannon model is more appropriate for calculating the effluent COD, p-NP concentrations in AMBR compared to the other models. The maximum specific biogas production rate, G(max), and proportionality constant, G(B), were found to be 1666.7 mL L(-1) day(-1) and 2.83 (dimensionless), respectively in modified Stover-Kincannon gas model. The bacteria had low Haldane inhibition constants (K(ID)=14 and 23 mg L(-1)) for p-NP concentrations higher than 40 mg L(-1) while the half velocity constant (K(s)) increased from 10 to 60 and 118 mg L(-1) with increasing p-NP concentrations from 40 to 85 and 125 mg L(-1).     

Use of Thiourea Leaching During Gold-Containing Dump Treatment

Metallurgist - In Tadzhikistan the volume of gold-containing waste converted to gold is 18 tons. This waste is products of amalgamation and cyaniding processes., and with respect to end component...     

Effects of User Request Patterns on a Multimedia Delivery System

Because of their size, service times, and drain on server resources, multimedia objects require specialized replication systems in order to meet demand and ensure content availability. We present a novel method for creating replication systems where the replicated objects' sizes and/or per-object service times are large. Such replication systems are well-suited to delivering multimedia objects on the Internet. Assuming that user request patterns to the system are known, we show how to create replication systems that distribute read load to servers in proportion to their contribution to system capacity and experimentally show the positive load distribution properties of such systems. However, when user request patterns differ from what the system was designed for, system performance will be affected. Therefore, we also report on results that reveal (i) how server loads are affected and (ii) the impact two system design parameters (indicators of a system's load distribution qualities) have on server load when request patterns differ from that for which a system was designed.