Multicolor Photo‐Crosslinkable AIEgens toward Compact Nanodots for Subcellular Imaging and STED Nanoscopy

Aggregation induced emission (AIE) has attracted considerable interest for the development of fluorescence probes. However, controlling the bioconjugation and cellular labeling of AIE dots is a challenging problem. Here, this study reports a general approach for preparing small and bioconjugated AIE dots for specific labeling of cellular targets. The strategy is based on the synthesis of oxetane‐substituted AIEgens to generate compact and ultrastable AIE dots via photo‐crosslinking. A small amount of polymer enriched with oxetane groups is cocondensed with most of the AIEgens to functionalize the nanodot surface for subsequent streptavidin bioconjugation. Due to their small sizes, good stability, and surface functionalization, the cell‐surface markers and subcellular structures are specifically labeled by the AIE dot bioconjugates. Remarkably, stimulated emission depletion imaging with AIE dots is achieved for the first time, and the spatial resolution is significantly enhanced to ≈95 nm. This study provides a general approach for small functional molecules for preparing small sized and ultrastable nanodots.     

3D Orientational Control in Self‐Assembled Thin Films with Sub‐5 nm Features by Light

While self‐assembled molecular building blocks could lead to many next‐generation functional organic nanomaterials, control over the thin‐film morphologies to yield monolithic sub‐5 nm patterns with 3D orientational control at macroscopic length scales remains a grand challenge. A series of photoresponsive hybrid oligo(dimethylsiloxane) liquid crystals that form periodic cylindrical nanostructures with periodicities between 3.8 and 5.1 nm is studied. The liquid crystals can be aligned in‐plane by exposure to actinic linearly polarized light and out‐of‐plane by exposure to actinic unpolarized light. The photoalignment is most efficient when performed just under the clearing point of the liquid crystal, at which the cylindrical nanostructures are reoriented within minutes. These results allow the generation of highly ordered sub‐5 nm patterns in thin films at macroscopic length scales, with control over the orientation in a noncontact fashion.     

Synthesis of Co/SiO2 hybrid nanocatalyst via twisted Co3Si2O5(OH)4 nanosheets for high-temperature Fischer-Tropsch reaction

A cobalt-silica hybrid nanocatalyst bearing small cobalt particles of diameter ～5 nm was prepared through a hydrothermal reaction and hydrogen reduction.The resulting material showed very high CO conversion (＞82％) and high hydrocarbon productivity (～1.0 gHc·g-1cat,·h-11) with high activity (～8.5 x 10-5 molco·g-1Co·S-1) in the Fischer-Tropsch synthesis reaction.     

Fracture mechanics‐based progressive damage modelling of adhesively bonded fibre‐reinforced polymer joints

A quasi‐static progressive damage model for prediction of the fracture behaviour and strength of adhesively bonded fibre‐reinforced polymer joints is introduced in this paper. The model is based on the development of a mixed‐mode failure criterion as a function of a master R‐curve derived from the experimental results obtained from standard fracture mechanics joints. Consequently, the developed failure criterion is crack‐length and mode‐mixity dependent, and it takes into account the contribution of the fibre‐bridging effect. Energy release rate values for adhesively bonded double‐lap joints are obtained by using the virtual crack closure technique method in a finite element model, and the numerically obtained strain energy release rate is compared to the critical strain energy release rate given by the mixed‐mode failure criterion. The entire procedure is implemented in a numerical algorithm, which was successfully used for predicting the strength and R‐curve response of adhesively bonded double‐lap structural joints made of pultruded glass fibre‐reinforced polymers and epoxy adhesives.     

An investigation of T‐stresses in a plate with an inclined crack under biaxial loadings

For plates with an inclined crack of wide‐range aspect ratios under biaxial loadings, T‐stress values are calculated with three‐dimensional finite element method. The results show that the normalized T‐stress is crack length and orientation dependent. A linear equation for the relationship between normalized T‐stresses and biaxility factors is proposed to describe the normalized T‐stresses for different crack lengths and crack angles under different biaxial loadings, which is more convenient and involves wider biaxility ratios compared with the existing solutions. The plate thickness effect and the trend of normalized T‐stresses along the crack front thickness are also studied for mode I and I–II mixed‐mode cracks. Based on the analyses and comparisons, it is necessary to take the thickness effect into consideration when the crack length is long enough (a/W = 7/10). When the component of mode II is significant (β > 45°), and the biaxility ratios are negative, T‐stresses near the free surface are lower than those at other positions, which are the opposite of mode I crack and most of I–II mixed‐mode crack.     

Enhanced hydrothermal stability of ZSM-5 formed from nanocrystalline seeds for naphtha catalytic cracking

We successfully synthesized hydrothermally stable ZSM-5 with crystalline nano seeds. We employed a template-free method using ZSM-5 crystalline nano seeds and sodium silicate as a silica source. The prepared ZSM-5 exhibited uniform crystal size and relative crystallinity greater than 100 %. The size of the crystalline nano seed in the scale of 100 nm was found to be the optimum size for obtaining uniform, highly crystalline ZSM-5 with structural stability. After P-modification, the synthesized ZSM-5 with the optimally sized seed showed high hydrothermal stability and improved catalytic naphtha cracking activity compared to a commercial ZSM-5 catalyst. In order to find the elements for the increased hydrothermal stability, the samples were evaluated by studying crystallinity, aluminum spectrum, and acidity using XRD, solid-state NMR, and NH₃-TPD, respectively after steaming at 800 °C for 24 h. It is speculated that the increased hydrothermal stability of the ZSM-5 resulted mainly from the increased aluminum structural stability.