Rheological and thermal properties of epoxy nanocomposites reinforced with alkylated multi‐walled carbon nanotubes

The effects of functionalized multi‐walled carbon nanotubes (MWCNTs) on thermal and chemorheological behaviors of an epoxy‐based nanocomposite system were investigated. Chemical functionalization of MWCNTs by acid modification (A‐MWCNTs) and chemical amidation (D‐MWCNTs) was confirmed using Fourier transform infrared spectroscopy and thermogravimetric analysis. It was found that the D‐MWCNTs had a significant effect on the chemorheological behaviors of the epoxy‐based nanocomposite. Compared to the epoxy/A‐MWCNT nanocomposite, the epoxy/D‐MWCNTs nanocomposite showed a significant increase in gel time, as obtained from isothermal rheology measurements. Also, the storage modulus of the diglycidylether of bisphenol F (DGEBF)/D‐MWCNTs nanocomposite was higher than that of the DGEBF/D‐MWCNTs nanocomposite and gradually increased with an increase of frequency. This could be interpreted by the relatively strongly interconnected structure of the D‐MWCNTs in the DGEBF epoxy resin, which arises from the functionalized alkyl groups of the D‐MWCNTs in dispersion phases with the DGEBF epoxy resin. Copyright © 2012 Society of Chemical Industry     

Optical band gap modulation by Mg-doping in In2O3(ZnO)3 ceramics

In this study, different amounts of Mg were doped in In₂O₃(Zn_1−xMg_xO)₃ and their thin films were grown by using the RF magnetron sputtering method. The optical and electrical characteristics of the films revealed that the lattice constant decreased while the optical band gap increased as the Mg content increased, showing an inverse proportional relationship with each other. Therefore, it was found that Mg doping in indium zinc oxide (IZO) is also effective for band gap modulation as it was reported in a Mg-doped ZnO system. When IZO thin films were grown in a more reducing ambient, the carrier concentration increased which resulted in the increase of band gap energy. This was explained due to the Burstein–Moss effect.     

Improvement in the photoelectrochemical responses of PCBM/TiO2 electrode by electron irradiation

ABSTRACT: The photoelectrochemical (PEC) responses of electron-irradiated 66-phenyl-C61-butyric acid methyl ester (PCBM)/TiO2 electrodes were evaluated in a PEC cell. By coating PCBM on TiO2 nanoparticle film, the light absorption of PCBM/TiO2 electrode has expanded to the visible light region and improved the PEC responses compared to bare TiO2 electrode. The PEC responses were further improved by irradiating an electron beam on PCBM/TiO2 electrodes. Compared to non-irradiated PCBM/TiO2 electrodes, electron irradiation increased the photocurrent density and the open-circuit potential of PEC cells by approximately 90% and approximately 36%, respectively at an optimum electron irradiation condition. The PEC responses are carefully evaluated correlating with the optical and electronic properties of electron-irradiated PCBM/TiO2 electrodes.     

A vacuum-sealed miniature X-ray tube based on carbon nanotube field emitters

ABSTRACT: A vacuum-sealed miniature X-ray tube based on a carbon nanotube field-emission electron source has been demonstrated. The diameter of the X-ray tube is 10 mm; the total length of the tube is 50 mm, and no external vacuum pump is required for the operation. The maximum tube voltage reaches up to 70 kV, and the X-ray tube generates intense X-rays with the air kerma strength of 108 Gy * cm2 min1. In addition, X-rays produced from the miniature X-ray tube have a comparatively uniform spatial dose distribution.     

A New Potent and Selective Monoamine Oxidase-B Inhibitor with Extended Conjugation in a Chalcone Framework: 1-[4-(Morpholin-4-yl)phenyl]-5-phenylpenta-2,4-dien-1-one

The general blueprint for the design of monoamine oxidase-B (MAO-B) inhibitors has been based on two phenyl or heteronuclei linked via a spacer of appropriate length. In this study, 1-[4-(morpholin-4-yl)phenyl]-5-phenylpenta-2,4-dien-1-one (MO10) was prepared by the condensation of 4′-morpholinoacetophenone and cinnamaldehyde in basic alcoholic medium. MO10 was assessed for inhibitory activity against two human MAO isoforms, MAO-A and MAO-B. Interestingly, MO10 showed a remarkable inhibition against MAO-B with an IC₅₀ value of 0.044 μM along with a selectivity index of 366.13. The IC₅₀ value was better than that of lazabemide (IC₅₀ value of 0.063 μM), which was used as a reference. Kinetics studies revealed that MO10 acted as a competitive inhibitor of MAO-B, with a K_i value of 0.0080 μM. The observation of recovery of MAO-B inhibition, compared to reference levels showed MO10 to be a reversible inhibitor. MTT assays showed that MO10 was nontoxic to normal VERO cells with an IC₅₀ value of 195.44 μg/mL. SwissADME predicted that MO10 provided advantageous pharmacokinetics profiles for developing agents acting on the central nervous system, that is, high passive human gastrointestinal absorption and blood–brain barrier permeability. Molecular docking simulations showed that MO10 properly entered the aromatic cage formed by Y435, Y398, and FAD of the active site of MAO-B. On the basis of these results, MO10 can be considered a promising starting compound in development of agents for the treatment of various neurodegenerative disorders.     

Protein Ligation-Assisted Reconstitution of Split HRP Fragments for Facile Production of HRP Fusion Proteins in E. coli

Horseradish peroxidase (HRP) is a pivotal biocatalyst for biosensor development and fine chemical synthesis. HRP proteins are mostly extracted and purified from the roots of horseradish because the solubility and productivity of recombinant HRP in bacteria are significantly low. In this study, we investigate the reconstitution system of split HRP fragments to improve its soluble expression levels in E. coli allowing the cost-effective production of bioactive HRPs. To promote the effective association between two HRP fragments (HRPn and HRPc), we exploit SpyTag-SpyCatcher chemistry, a versatile protein coupling method with high affinity and selectivity. Each HRP fragment was genetically fused with SpyTag and SpyCatcher, respectively, exhibiting soluble expression in the E. coli cytoplasm. The engineered split HRPs were effectively and irreversibly reconstituted into a biologically active and stable assembly that can catalyze intrinsic enzymatic reactions. Compared to the chaperone co-expression system, our approach shows that the production yield of soluble HRP is comparable, but the purity of the final product is relatively high. Therefore, our results can be applied to the high-yield production of recombinant HRP variants and other difficult-to-express proteins in bacteria without complex downstream processes.     

Default Bayesian Priors for Regression Models with First-Order Autoregressive Residuals

Abstract. The objective of this paper is to develop default priors when the parameter of interest is the autocorrelation coefficient in normal regression models with first-order autoregressive residuals. Jeffreys' prior as well as reference priors are found. These priors are compared in the light of how accurately the coverage probabilities of Bayesian credible intervals match the corresponding frequentist coverage probabilities. It is found that the reference priors have a definite edge over Jeffreys' prior in this respect. Also, the credible intervals based on these reference priors seem superior to similar intervals based on certain divergence measures.     

Regioselective Synthesis of 1,2‐ and 1,4‐Dihydroquinolines by Palladium‐Catalyzed Intramolecular N‐Arylation

A series of 1,2‐ and 1,4‐dihydroquinolines has been successfully prepared. The Pd‐catalyzed intramolecular N‐arylation of Z‐enamines, formally prepared by the Horner–Wadsworth–Emmons olefination, proceeded efficiently to furnish the cyclized products. Depending on the cyclization conditions, substituted 1,4‐dihydroquinolines and further isomerized 1,2‐dihydroquinolines were independently obtained in high yields with an excellent control of isomerization of the double bond.

     

Role of Nd3+ ions on the nucleation and growth of PbS quantum dots (QDs) in silicate glasses

The influence of Nd₂O₃ addition on the precipitation kinetics of lead chalcogenide (PbS) quantum dots (QDs) in silicate glasses was investigated. Energy dispersive X‐ray spectroscopy (EDS) indicated that the Nd³⁺ ions are preferentially located inside the PbS QDs rather than in the glass matrix. Changes in diameter (D) of PbS QDs exhibited smaller time dependencies (i.e., D≈t^{0.270‐0.286}) than that predicted by the classical Lifshitz–Slyozov–Wagner (LSW) theory. This is due to the limited concentrations of Pb²⁺ and S^2? ions and the large diffusion distance inside the glass matrix. In addition, extended X‐ray absorption fine structure (EXAFS) results indicated that the formation of PbS QDs was retarded due to the presence of Nd₂O₃ in the glasses, as the large NdO_x polyhedra interrupt the diffusion of Pb²⁺ and S^2? ions. We believe that these Nd³⁺ ions are primarily located in PbS QDs in the form of Nd–O clusters, and that the PbS QDs are built on top of these clusters.     

Effect of structural change of pitch on the thermal conductivity of epoxy‐based composites filled with heat‐treated pitch

Petroleum‐based pitches were used as filler materials to study the effects of heat‐treatment‐induced changes in pitch structure on the thermal conductivity of epoxy‐based composites. The heat treatment was performed in two steps: the first involved heating the pitch to 250 °C in order to remove the low‐molecular‐weight compounds from the pitch, and the second involved heating the pitch to either 430 or 450 °C. There was no significant difference in the curing behavior of the diglycidyl ether of bisphenol A (DGEBA)/pitch composites, regardless of the heat‐treatment temperature. However, the thermal conductivity of the DGEBA/pitch composites improved with increasing heat‐treatment temperature, and the epoxy composite prepared with pitch heat‐treated at 430 °C exhibited the maximum thermal conductivity. This can be attributed to structural changes in the pitch, such as the distance between adjacent planes (d‐spacing), crystallite height (L_c) and crystallite width (L_a). Although L_c of the pitch increased with increasing heat‐treatment temperature, the d‐spacings and L_a decreased. These results suggest that the heat treatment of the pitch led to a well‐stacked crystalline structure. However, compared with the pitch heat‐treated at 430 °C, that heat‐treated at 450 °C exhibited lower thermal conductivity in the DGEBA/pitch composite because of the low L_a, resulting in the loss of basal carbon as a consequence of in situ gasification, and pyrolysis of the low‐molecular‐weight compounds in the pitch. © 2013 Society of Chemical Industry