Capillary forces between sediment particles and an air-water interface

In the vadose zone, air-water interfaces play an important role in particle fate and transport, as particles can attach to the air-water interfaces by action of capillary forces. This attachment can either retard or enhance the movement of particles, depending on whether the air-water interfaces are stationary or mobile. Here we use three standard PTFE particles (sphere, circular cylinder, and tent) and seven natural mineral particles (basalt, granite, hematite, magnetite, mica, milky quartz, and clear quartz) to quantify the capillary forces between an air-water interface and the different particles. Capillary forces were determined experimentally using tensiometry, and theoretically assuming volume-equivalent spherical, ellipsoidal, and circular cylinder shapes. We experimentally distinguished between the maximum capillary force and the snap-off force when the air-water interface detaches from the particle. Theoretical and experimental values of capillary forces were of similar order of magnitude. The sphere gave the smallest theoretical capillary force, and the circular cylinder had the largest force due to pinning of the air-water interface. Pinning was less pronounced for natural particles when compared to the circular cylinder. Ellipsoids gave the best agreement with measured forces, suggesting that this shape can provide a reasonable estimation of capillary forces for many natural particles.     

Aluminum‐enhanced alkali diffusion from float glass to PVD‐sputtered silica thin films

Interdiffusion processes between aluminum enriched PVD‐sputtered silica thin films and industrial float soda‐lime silicate glass substrates are quantitatively studied using SIMS analysis. Heat treatments are performed at temperatures close or above the glass transition temperature of the float glass. Aluminum doping of the film is shown to strongly increase the migration of alkali from the glass substrate to the silica thin film. In particular the final alkali content in the film exhibits a linear scaling with the aluminum concentration. An interdiffusion process is evidenced between bulk alkali ions and protons originating from a significant water content in the as‐deposited silica film. Experimental measurements of sodium concentration are shown to be consistent with a simple thermodynamic model based on the equilibration of the activity of sodium between the film and the glass substrate.     

Reactor dosimetry for VVERs RPV lifetime assessment

A state of the art review of Reactor Dosimetry used for reactor pressure vessel irradiation damage assessment and lifetime evaluation of the Russian type VVER reactors is presented. The necessity of prospective studies in Reactor Dosimetry for improvements that will reduce the neutron fluence uncertainty and in this way to substantiate the extension of NPP lifetime is summarized by specialists in Reactor Dosimetry from countries operating VVER reactors such as Russia, Ukraine, Czech Republic, Finland, Hungary, and Bulgaria, together with specialists from Western European countries such as France, Spain, Germany, Belgium, The Netherlands, and UK, operating PWR and BWR type reactors.     

Criteria on existence of horseshoes near homoclinic tangencies of arbitrary orders

Consider (m + 1)-dimensional, m ≥ 1, diffeomorphisms that have a saddle fixed point O with m-dimensional stable manifold W^s(O), one-dimensional unstable manifold W^u(O), and with the saddle value σ different from 1. We assume that W^s(O) and W^u(O) are tangent at the points of some homoclinic orbit and we let the order of tangency be arbitrary. In the case when σ < 1, we prove necessary and sufficient conditions of existence of topological horseshoes near homoclinic tangencies. In the case when σ > 1, we also obtain the criterion of existence of horseshoes under the additional assumption that the homoclinic tangency is simple.     

Microstructure and mechanical properties of Mg-5Li-1Al sheets prepared by accumulative roll bonding

Ultrafine-grain and high-strength Mg-5Li-1Al sheets were prepared by accumulative roll bonding (ARB) process. Evolution of microstructure and mechanical properties of ARB-processed Mg-5Li-1Al sheets was investigated.Results show that, during ARB process, the evolution of deformation mechanism of t Mg-5Li-1Al alloy is as follows: twinning deformation, shear deformation, forming macro shear zone, and finally dynamic recrystallization (DRX). The grain refining mechanism changes from twin DRX to rotation DRX. With the increase in ARB cycles, strength of the Mg-5Li-1Al sheets is enhanced, whilst elongation varies slightly. With the increase in rolling cycles, anisotropy of mechanical properties decreases. It is conclusive that strain hardening and grain refinement dominate the strengthening mechanism of Mg-5Li-1Al alloy.     

The aquathermolysis of heavy oil from Riphean-Vendian complex with iron-based catalyst: FT-IR spectroscopy data

In this paper, we investigated the influence of steam treatment on structural group composition of resins and asphaltenes of heavy oil. The object of investigation was oil-saturated rocks from Riphean-Vendian complex. The extracted crude oil was determined as a high-viscous fluid. The resins and asphaltenes destructed in a small extent due to thermal treatment. The oil-soluble iron-based catalyst intensified the destructive processes. The content of sulfur compounds (-SO) in resins and asphaltenes drastically decreased due to reduction reaction of sulfoxide to sulfide and hydrogen sulfide. The results showed that catalytic aquathermolysis, even at low temperature ranges, promoted the cracking reaction of most macromolecular components and increased the content of light fractions of heavy oil. Consequently, it reduced its viscosity.     

Synergistic fire-retardancy properties of melamine coated ammonium poly(phosphate) in combination with rod-like mineral filler attapulgite for polymer-modified bitumen roofing membranes

A novel intumescent (carbonization, acid donor and foaming) fire retardant that mimics carbon nanotubes was introduced into bitumen roofing and characterized using cone calorimetry as the main analytical tool. The experimental results indicate that 18% (by mass) attapulgite mineral (ATTP) mixed with base bitumen decreased the peak heat release rate per unit area (pHRRPUA) by 10%. Further, incorporation of melamine coated ammonium polyphosphate (MAPP) decreased the pHRRPUA by 52% and a mixture of these (3:1, ATTP:MAPP) decreased the pHRRPUA by 25% as compared to adding CaCO₃ as a filler. The residual mass loss after the cone test was also improved with up to 3%. The indication of a positive synergistic flame retardant effect of the ATTP-MAPP mixture is supported by thermogravimetric analysis. The addition of this rod-like mineral improved the general fire retardant properties of the base bitumen and increased the viscosity. Therefore, the polymer-modified bitumen with both fire retardant and rheological properties (providing mechanical strength) is a promising novel approach in the design of bitumen roofing membranes.     

Impact of A134 and E218 Amino Acid Residues of Tropomyosin on Its Flexibility and Function

Tropomyosin (Tpm) is one of the major actin-binding proteins that play a crucial role in the regulation of muscle contraction. The flexibility of the Tpm molecule is believed to be vital for its functioning, although its role and significance are under discussion. We choose two sites of the Tpm molecule that presumably have high flexibility and stabilized them with the A134L or E218L substitutions. Applying differential scanning calorimetry (DSC), molecular dynamics (MD), co-sedimentation, trypsin digestion, and in vitro motility assay, we characterized the properties of Tpm molecules with these substitutions. The A134L mutation prevented proteolysis of Tpm molecule by trypsin, and both substitutions increased the thermal stability of Tpm and its bending stiffness estimated from MD simulation. None of these mutations affected the primary binding of Tpm to F-actin; still, both of them increased the thermal stability of the actin-Tpm complex and maximal sliding velocity of regulated thin filaments in vitro at a saturating Ca²⁺ concentration. However, the mutations differently affected the Ca²⁺ sensitivity of the sliding velocity and pulling force produced by myosin heads. The data suggest that both regions of instability are essential for correct regulation and fine-tuning of Ca²⁺-dependent interaction of myosin heads with F-actin.