Optimising the ice cream formulation using basil seed gum (Ocimum basilicum L.) as a novel stabiliser to deliver improved processing quality

Mixture design was used to determine the optimum ratio as well as concentration of basil seed gum (BSG), guar gum (GG) and carboxymethyl cellulose (CMC) in the formulation of ice cream stabilisers. Predicted equations and contour plots of physicochemical responses were also generated. Generally, increasing the ratio of BSG in gums mixture increased the apparent viscosity of ice cream mixes and decreased the melting rate. Increasing the proportion of GG at concentration of 0.35% enhanced overrun of samples. High ratios of BSG at concentration of 0.35% and CMC at concentration of 0.15% increased the fat destabilisation in ice creams. Combination of 84.31% BSG and 15.69% CMC at concentration of 0.35% proposed as optimum formulation which verified in practice. Introducing BSG as a novel source of stabiliser could be promising as alternative and improve the quality and diversity of ice cream and related products.     

Fermentation of table cream by Lactobacillus plantarum strains: effect on fungal growth,aflatoxin M1 and ochratoxin A

Aflatoxin M1 (AFM₁) and ochratoxin A (OTA) are two main mycotoxins in milk and dairy products. In the present work, the ability of four Lactobacillus strains (L. plantarum PTCC 1058, L. plantarum LP3, L. plantarum AF1 and L. plantarum LU5) to remove AFM1 and OTA in fermented cream was studied during 24 h fermentation. The antifungal activity of the mentioned lactobacilli against the defined fungi (Aspergillus flavus PTCC 5004, Aspergillus parasiticus PTCC 5018, Aspergillus nidulans PTCC 5014, Aspergillus ochraceus PTCC 5060) was also evaluated. The results showed that the cell counts of all strains were increased by 64–70% during fermentation. All Lactobacillus strains decreased the amount of AFM₁ significantly (P ≤ 0.05) in the range of 26–52%, which the highest AFM₁-reducing effect was related to L. plantarum LU5 (from 0.5 to 0.24 μg kg⁻¹). The mean OTA removal by Lactobacillus strains in fermented cream also ranged from 32 to 58%. Amongst Lactobacillus strains, the cell-free culture supernatants of L. plantarum LU5 showed the highest (inhibition zone of 26.7 ± 1.2 mm) and L. plantarum LP3 and L. plantarum PTCC 1058 the lowest antifungal activities. The fermented creams contained Lactobacillus strains exhibited the highest and lowest antifungal activities against A. ochraceus and A. parasiticus, respectively. L. plantarum LU5, with the inhibition zone of 27.6 ± 0.9 mm, was the most effective fungal inhibitor, while L. plantarum PTCC 1058 had the lowest antifungal activity.     

ERES: an extended regular expression signature for polymorphic worm detection

Journal of Computer Virology and Hacking Techniques - The quick spreading of modern sophisticated polymorphic worms poses a serious threat to the internet security. So far, several signature...     

Optimisation of a combined Stirling cycle–organic Rankine cycle using a genetic algorithm

In a Stirling cycle a huge amount of energy is wasted due to the losses. This wasted energy may be utilised as a heat source for the boiler of an organic Rankine cycle (ORC). Combination of these two cycles leads to an increased cycle efficiency compared to a single Stirling cycle and the analysis and optimisation of the integrated system is carried out. Optimisation is performed using the genetic algorithm and considering three decision variables: the temperature of the cold tank of the Stirling cycle, the pressure ratio and the temperature of the ORC condenser. In optimisation, the efficiency is considered as the objective function and the highest value is achieved by adjusting the decision variables. Using this method, the efficiency of the overall combined cycle was improved in which the highest efficiency was obtained to be 41.5%.     

Effect of different levels of fat and inulin on the microbial growth and metabolites in probiotic yogurt containing nonviable bacteria

Effects of different levels of fat and inulin on bacterial cell counts, degree of proteolysis and concentrations of organic acids in the yogurt containing inactivated cells of probiotic strains Bifidobacterium animalis and Lactobacillus acidophilus were investigated. Results showed that both L. acidophilus and B. animalis grew well in the yogurt samples reaching cell counts higher than 10⁶ CFU mL^?1 at the final pH of 4.5. Inulin at the concentration of 1% had no significant effects on the production of organic acids and cell counts of L. acidophilus, but promoted the growth of B. animalis with a reduction in the degree of proteolysis. Generally, different fat levels showed significant effects on the production of organic acids and nonsignificant effects on the cell counts of probiotic bacteria and degree of proteolysis. In case of lactic acid, the ratio of L‐ (+)to D‐ (?) isomer ranged from 50/50 to 80/20 in yogurt samples.     

Performance based earthquake evaluation of reinforced concrete buildings using design of experiments

Seismic resiliency of new buildings has improved over the years due to enhancements in seismic codes and design practices. However, existing buildings designed and built under earlier codes are vulnerable and require a performance-based screening and retrofit prioritization. The performance modifiers considered are soft story, weak story, and the quality of construction, which are collated through a walk down survey. The building evaluation is performed through a pushover analysis, and performance objective are obtained through initial stiffness of the pushover curve. Using a design of experiments technique, a reliable system input-output relation has been identified and used to evaluate the performance criteria at untried design points (i.e., buildings with different modifier values). The proposed method of performance based evaluation is illustrated through consideration of the different structural deficiencies on a typical six-storey reinforced concrete building in Vancouver. Through the designed experiments, the main and interaction effects of the performance modifiers have also been studied.     

Failure Analysis and Remedy Procedure for Cracking of Fuel Nozzles in a Gas Turbine

A common failure in a certain type of gas turbine, observed during the first periodic inspection, is radial cracks in the tip plate of gas fuel nozzles. Here, each gas turbine has 18 nozzles. In all nozzles and in all similar units, these cracks of lengths ranging from 1 mm to a maximum of 14.5 mm are observed. As prescribed by the manufacturer, the defective part must be removed and replaced by welding and machining of a new one. But this problem is repeated and observed in the next periodic visits, and in all units. Depending on the number of nozzles in each gas turbine unit and the number of units in total, these repairs are very expensive and time-consuming. In this paper, the failure is analyzed and the causes of the cracks in the nozzles are investigated. Studies show that the main causes of nozzle failure are residual stresses caused by welding and thermal stresses caused by the start-up and shutdown processes. According to results, a solution has been proposed to release these residual and thermal stresses. After the implementation of this method in 1998, no more failure has been reported by the repair team, which proves the effectiveness of this solution. Since this paper has been prepared based on technical reports from the years between 1996 and 1998, the cited references of this paper are these technical reports.     

Structural changes and stress relaxation behavior of κ‐carrageenan cold‐processed gels: Effects of ultrasonication time and power

Ultrasound has been used for cold gelation of κ‐carrageenan hydrocolloid. In this work, the effect of ultrasound conditions such as power (50–150 W) and time (20–240 s) of sonication has been investigated. The application of ultrasound to hydrocolloid dispersion caused an increase in water solubility. The texture profile analysis test was used in order to evaluate the mechanical properties of gels. Textural parameters of κ‐carrageenan gels, enhanced with increasing sonication time and power up to a certain level (usually 2.5 min) and longer sonication times had negative effects. In addition, intrinsic viscosities of sonicated specimens were measured to investigate the molecular characteristics of all samples. An increase in the process time and power reduced the intrinsic viscosity. The microstructural observation by scanning electron microscope determined that applying power ultrasound on κ‐carrageenan dispersions influenced the formation of gel networks significantly.