Characterization of Ba4.5Re9Ti18O54 (Re = La,Nd) microwave dielectric ceramics

Ba_4.5Re₉Ti₁₈O₅₄ (Re = La, Nd) ceramics were prepared via a solid state mixed oxide route. X-ray diffraction (XRD) analysis revealed the formation of the major Ba_4.5Re₉Ti₁₈O₅₄ phase along with rutile (TiO₂) as a secondary phase. Rietveld structure refinement of the recorded XRD data confirmed that the crystal structure of Ba_4.5Nd₉Ti₁₈O₅₄ (BNT) was orthorhombic (Pnma) with unit cell parameters a = 22.3412 Å, b = 7.6824 Å and c = 12.1952 Å. Ba_4.5La₉Ti₁₈O₅₄ (BLT) exhibited high relative permittivity (95.6), low quality factor (2,102 GHz) and a high temperature coefficient of resonance frequency (+352 ppm/°C). The substitution of Nd for La caused a decrease in both the relatively permittivity and temperature coefficient of resonance frequency to 84.2 and 167 ppm/°C respectively and an increase in quality factor to 8,007 GHz. Raman spectroscopic analysis revealed that lattice defects may be responsible for the observed decrease in quality factor of BLT ceramics in comparison to BNT. The Raman shifts at 533.5 and 613.6 cm^?1, related to Ti–O bond stretching, decreased for BNT ceramics, which may be a possible reason for the observed decrease in relative permittivity.     

Performance of microwave synthesized dual solvent dope solution and lithium bromide additives on poly(ethersulfone) membranes

BACKGROUND: Generally the fabrication of polymeric membranes is a complicated and expensive process since it involves several steps. The preliminary preparation steps involve polymer drying and dissolution and is very time consuming and expensive. Currently, conventional electrothermal heating (CEH) is used to dissolve polyethersulfone in an aprotic solvent for membrane fabrication. Usually CEH requires 6 to 8 h at temperatures of 80 to 95 °C. This paper reports the fabrication and characterization of polyethersulfone (PES) asymmetric ultrafiltration membrane made from microwave (MW) synthesis casting solution consisting of various compositions of double solvents and lithium bromide (LiBr) additive. RESULTS: Homogeneous dual solvent dope solutions prepared via microware irradiation took only 1 h instead of the 7 h when prepared using CEH. The results also revealed that the membrane permeation and rejection rates, pore size and porosity were dependent on the ratio of LiBr to acetone. Membranes with LiBr kept at 2 and 3 wt% exhibited both high rejection and permeation rates with minimum pore sizes of 1.067 and 1.214 nm respectively. The presence of LiBr and the occurrence of chain scission were elucidated using Fourier transform infrared (FTIR) spectroscopy while its hydrophilic property was confirmed by water absorption and contact angle measurements. CONCLUSIONS: It was concluded that the microwave technique is capable of producing 1 L membrane solutions in less than 1 h. The membranes prepared from the microwave solutions show good rejection and permeation rates. Copyright © 2011 Society of Chemical Industry     

Effect of precipitation on the geological development of badlands in arid regions

The main objective of this paper was to study the effect of precipitation on the geological development of badlands in arid regions. Field observations and laboratory investigations were carried out to characterize the surface soils of the Avonlea badlands in southern Saskatchewan, Canada, which is currently experiencing a rapid development in infrastructure. Three distinct surface sediments were identified: an upper slope of cemented sandstone, a mid-slope on weathered mudrock and a relatively flat basal pediment. Each of these soils reacts differently to rainfall events. Precipitation results in grain size reduction which, together with the consistency limits, explains the water sensitivity of the soils; the fines increased by 16% in the cemented sandstone, 78% in the weathered mudrock and 33% in the basal pediment. Erosion susceptibility was highest in the basal pediment (2% clays) followed by cemented sandstone (cementation by 6% active clays) and then by weathered mudrock (cohesion due to the 40% clay).     

Structural and thermoelectric properties of hydrothermal-processed Ag-doped Fe2O3

Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) nanopowders with various Ag contents were synthesized at different hydrothermal reaction temperatures (150?°C and 180?°C). Their structural properties were fully investigated through an X-ray diffraction, a Fourier transform infrared spectroscopy, and an X-ray photoelectron spectroscopy. The hydrothermal reaction temperature, time, and Ag content remarkably affected the morphological characteristics and crystal structure of the synthesized powders. The Fe_2-xAg_xO₃ (0?≤?x?≤?0.04) powders synthesized at 150?°C for 6?h and the Fe_2-xAg_xO₃ (0.02?≤?x?≤?0.04) powders synthesized at 180?°C for 12?h formed the orthorhombic α-FeOOH phase with a rod-like morphology, whereas the Fe_2-xAg_xO₃ (0?≤?x?≤?0.01) powders synthesized at 180?°C for 12?h formed the rhombohedral α-Fe₂O₃ phase with a spherical-like morphology. The Fe_1.98Ag_0.02O₃ fabricated by utilizing Fe_1.98Ag_0.02O₃ powders synthesized at 180?°C showed the largest power factor (0.64?×10^?5 Wm^?1 K^?2) and dimensionless figure-of-merit (0.0036) at 800?°C.     

Current-mode active-only universal filter

A novel current-mode active-only universal filter based on and employing three DO-CCCIIs and two OAs is introduced. The circuit is fully integrable and programmable, and implements all the five generic filtering functions. The three basic filtering responses LP, BP and HP are implemented simultaneously by the circuit, while AP and notch signals can be realized simply by connecting appropriate node currents. The currents are available at high output impedances, so the synthesized filter can be cascaded without additional buffers to realize higher order filters. The filter performance factors ω ₀ and Q are electronically tunable in an orthogonal manner through separate bias currents of the CCCII. The PSPICE simulation was carried out to realize the proposed circuit.     

Vibrations of functionally graded cylindrical shells based on elastic foundations

In this paper, a study on the vibrations of functionally graded cylindrical shells based on the Winkler and Pasternak foundations is presented. The shell equations are amended by inducting the moduli of the Winkler and Pasternak foundations. The wave propagation method is employed to solve the shell dynamical equations. The method is based on the approximate eigenvalues of characteristic beam functions. The validity and accuracy of the present approach are verified by a number of comparisons.     

Imaging-based detection of AAR induced map-crack damage in concrete structure

Imaging-based inspection methods are increasingly being employed for crack detection in concrete structures, because they provide quantitative information compared to inspections based solely on conventional visual approaches. However, efficient image analysis methods are needed. This study proposes the application of the grey level co-occurrence matrix (GLCM) texture analysis approach and an artificial neural network (ANN) classifier to obtain surface damage information, such as the total amount of superficial cracking, as well as the total length, and range of crack widths. These methods were applied to thermographic, visual colour and greyscale images of concrete blocks from CANMET that were exposed outdoors for ten years, as well as slabs from GRAI that were kept indoors, all specimens exhibiting various levels of alkali-aggregate reaction (AAR) damage. Results of the classifications show that the greyscale imagery performed fairly well, with an overall classification accuracy range of 72.3–76.5% for the CANMET blocks, and 68.7–75.3% for the GRAI slabs. Classifications using the colour imagery were slightly better than the greyscale imagery, with accuracies ranging from 71.4% to 75.2% for CANMET blocks and 70.9–72.0% for the GRAI slabs. The thermographic imagery, however, produced the highest overall classification accuracies, which range from 73.1% to 76.3% for the CANMET blocks and 74.2–76.9% for the GRAI slabs. The results show that all three types of imagery are relatively effective in characterizing and quantifying crack damage; however, the infrared thermography produced more accurate results compared to the visual colour, and greyscale images.     

Controlled-release naproxen using micronized ethyl cellulose by wet-granulation and solid-dispersion method

This study has been undertaken to develop a controlled-release tablet dosage form of naproxen using ethocel (ethyl cellulose) as the rate-controlling polymer. The formulations were made by employing the conventional wet-granulation method and the solid-dispersion method. Tablets made by both methods were compared for their controlled-release dissolution profiles. Both methods were useful in developing the controlled-release formulations of naproxen with desirable properties. However, the amount of polymer required to make a formulation with the desired release profile was 33% less via solid dispersion than via wet granulation. A cumulative 88% of naproxen was released from the solid-dispersion formulation, compared with 84% from the wet-granulation formulation.     

Overdependence on degraded gist memory in Alzheimer's disease.

Alzheimer's disease (AD) reduces associative effects on false recognition in the Deese-Roediger-McDermott task, either due to impaired memory for gist or impaired use of gist in memory decisions. Gist processes were manipulated by blocking or mixing studied words according to their associations and by varying the associative strength between studied and nonstudied words at test. Both associative blocking and associative strength had smaller effects on false recognition in AD patients than in control participants, consistent with gist memory impairments. However, unlike the case with control participants, blocking influenced true and false recognition equally in AD patients, demonstrating an overdependence on gist when making memory decisions. AD also impaired item-specific recollections, relative to control participants, as true recognition of studied words was reduced even when the two groups were equated on gist-based false recognition. We propose that the overdependence on degraded gist memory in AD is caused by even larger impairments in item-specific recollections. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Action Planning for Directed Model Checking of Petri Nets

Petri nets are fundamental to the analysis of distributed systems especially infinite-state systems. Finding a particular marking corresponding to a property violation in Petri nets can be reduced to exploring a state space induced by the set of reachable markings. Typical exploration(reachability analysis) approaches are undirected and do not take into account any knowledge about the structure of the Petri net. This paper proposes heuristic search for enhanced exploration to accelerate the search. For different needs in the system development process, we distinguish between different sorts of estimates.Treating the firing of a transition as an action applied to a set of predicates induced by the Petri net structure and markings, the reachability analysis can be reduced to finding a plan to an AI planning problem. Having such a reduction broadens the horizons for the application of AI heuristic search planning technology. In this paper we discuss the transformations schemes to encode Petri nets into PDDL. We show a concise encoding of general place-transition nets in Level 2 PDDL2.2, and a specification for bounded place-transition nets in ADL/STRIPS. Initial experiments with an existing planner are presented.