Investigation of Dissipation,Adsorption, Degradation,and Leaching of Triazophos Pesticide in Various Soils

This study concerns the investigation of dissipation, adsorption, and degradation of triazophos in different soils from Pakistan. These processes help in the disappearance of pesticide from the environment. Gas chromatography was used for dissipation and adsorption analysis while for degradation study mass spectrometer was used in addition of gas chromatography (GC-MS). The dissipation rate of triazophos in three different soils was 90% over 30 days with average half-life of 9.059 days. From dissipation study it was inferred that rate is variable in each soil due to climatic changes, soil nature and soil-pesticide interactions. Adsorption experiment has revealed that the adsorption of this pesticide to soil follows the pseudo first order kinetic model with rate constant value of 0.479/h and Freundlich isotherm with adsorption capacity of 1.832 mol/g. Degradation study has displayed two major metabolites, one is phosphorothioic acid, S-[2-[(1-cyano-1-methylethyl) amino]-2-oxoethyl] O,O-diethyl ester at retention time of 9.136 and the other is sulfotep at 14.304 min. The leaching potential of triazophos was also calculated from its half-life and organic carbon content present in soil which was 1.688 representing it as non leacher pesticide.     

Estimation of Desired Motion Intention and compliance control for upper limb assist exoskeleton

International Journal of Control, Automation and Systems - In this paper, we have addressed two issues for upper limb assist exoskeleton. 1) Estimation of Desired Motion Intention (DMI); 2) Robust...     

Oil palm bunch ripeness classification using fluorescence technique

Oil palm is Malaysia’s major agriculture product and it covers approximately 5 million hectares of Malaysia’s land. Limited land resources have been an important factor that motivated the need to increase oil extraction rate (OER). OER of oil palm fresh fruit bunches (FFB) depends highly on their maturity stage. The ripe oil palm FFB will produce high OER while the under ripe and over ripe oil palm FFB will produce less oil. Thus, this paper presents a method of classification between oil palm FFB into ripe, under-ripe and over-ripe categories. This research was done at an oil palm plantation in peninsular Malaysia. A total of two-hundred and ten oil palm FFB that consist of seventy bunches for each category of under-ripe, ripe and over-ripe had been used. Each bunch was scanned ten times randomly with a hand-held multi-parameter fluorescence sensor called Multiplex®3. The parameter measured was the Blue-to-Red Fluorescence Ratio (BRR_FRF) obtained from blue-green (447 nm) and far-red (685 nm) emission signal by using ultraviolet (UV) light emitting diode as excitation light source. The novel contribution of this research is to prove that the oil palm FFB maturity can be determined using the Blue-to-Red Fluorescence ratio index. This is based to our finding of a significant difference among the three categories of ripeness based on the parameter. Classification and Regression Tree (C&RT) method was proposed in this paper. Hundred-fifty samples were used to develop the model by trained it using C&RT method and the remaining sixty samples for the test component. By using the C&RT method, the results show the best accuracy of overall testing classification is 90%. This research will be useful for future development of non-destructive, automatic and real time oil palm FFB grading system.     

Asymptotic stability, ℓ2 gain,boundness analysis,and control synthesis for switched systems: a switching frequency approach

In this paper, several concepts of switching frequency are introduced to analyze the properties and performance of switched systems in infinite as well as finite‐time intervals. The observation is very motivating that different system properties and performances depend on different switching frequencies. Sufficient conditions ensuring asymptotic stability, ?₂ gain performance, and state boundness are derived on the basis of the notions of switching frequency, respectively. Then, on the basis of the analysis results, the control synthesis problems are addressed. LMI‐based design algorithms are proposed to meet different control synthesis requirements. Numerical design examples are provided to demonstrate our results. Copyright © 2011 John Wiley & Sons, Ltd.     

Groundwater potential modelling in a soft rock area using a GIS

A Geographical Information System (GIS) integration tool is proposed to demarcate the groundwater potential zone in a soft rock area using seven hydrogeologic themes: lithology, geomorphology, soil, net recharge, drainage density, slope and surface water bodies. Except for net recharge and slope, the other five themes are derived from remote sensing data. IRS-1B LISS-II data was used for a 631 km² area in Midnapur District, West Bengal, India. While slope was calculated using topographic sheets, net recharge was obtained from annual water table fluctuation data. Each feature of all the thematic maps was evaluated according to its relative importance in the prediction of groundwater potential. The evolved GIS-based model of the study area was found to be in strong agreement with available borehole and pumping test data.     

Solid lipid nanoparticles of anticancer drug andrographolide: formulation,in vitro and in vivo studies

Diterpenoidal anti-cancer drug andrographolide (AD) was encapsulated into solid lipid nanoparticle (SLN) because of poor aqueous solubility and high lipophilicity. AD-SLNs were prepared by solvent injection method and characterized for droplet size, surface morphology, zeta potential, etc. In vitro drug release was carried out by dialysis-membrane method. A pharmacokinetic study was performed by UPLC/Q-TOF-MS method to determine the maximum plasma concentration (C_max), area under the curve (AUC), etc. There was an improvement in C_max and AUC of AD-SLNs when compared with AD, thereby enhancing the bioavailability of AD. The t_max was increased than that of AD suspension, indicating the sustained release pattern of AD-SLNs. The antitumor activity was carried out on Balb/c mice showing better results with AD-SLNs as compared to AD. Thus, the AD-loaded SLNs would be useful for delivering poorly water-soluble AD with enhanced bioavailability and improved antitumor activity.     

Endothelial repair process and its relevance to longitudinal neointimal tissue patterns: comparing histology with in silico modelling

Re-establishing a functional endothelium following endovascular treatment is an important factor in arresting neointimal proliferation. In this study, both histology (in vivo) and computational simulations (in silico) are used to evaluate neointimal growth patterns within coronary arteries along the axial direction of the stent. Comparison of the growth configurations in vivo and in silico was undertaken to identify candidate mechanisms for endothelial repair. Stent, lumen and neointimal areas were measured from histological sections obtained from eight right coronary stented porcine arteries. Two re-endothelialization scenarios (endothelial cell (EC) random seeding and EC growth from proximal and distal ends) were implemented in silico to evaluate their influence on the morphology of the simulated lesions. Subject to the assumptions made in the current simulations, comparison between in vivo and in silico results suggests that endothelial growth does not occur from the proximal and distal ends alone, but is more consistent with the assumption of a random seeding process. This may occur either from the patches of endothelium which survive following stent implantation or from attachment of circulating endothelial progenitor cells.     

W-type hexaferrite nanoparticles: A consideration for microwave attenuation at wide frequency band of 0.5-10 GHz

The static and dynamic magnetic properties of W-type hexaferrites are tuned to meet the requirements of wide band frequencies for attenuation of electromagnetic interference and microwave absorptions purposes. For this purpose, the W-type hexaferrite of entirely new composition of BaCoZnFe_16−2yAl_yCe_yO₂₇ (y = 0, 0.2, 0.4, 0.6, 0.8 and 1.0) has been synthesized by the chemical co-precipitation. The material is characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The complex permittivity (?_r = ?′ − j?″) and permeability (μ_r = μ′ − jμ″) spectra are determined using Vector Network Analyzer (VNA) in a range from 0.5 GHz to 10 GHz. During this study, it is noticeable that the Al³⁺ and Ce³⁺ ions have considerable effect on the shape of the nanoparticles. Samples having Al-Ce contents y = 0.2 and y = 0.4 showed large values for magnetization (70.5 emu/g) and remanent magnetization (32.9 emu/g). In addition, more than 99% absorption (>−20 dB) is noted for this sample composition. Based on these results it is concluded that the microwave absorption characteristics of these compounds can be tuned for the required frequency by varying the thickness of the absorber. Due to this reason, potential employment of the synthesized nanoparticles for absorption of electromagnetic radiations at wide frequency band of 0.5-10 GHz has been proposed.