离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

Vibrational spectroscopic characterization of rigid rod polymers: 3. Microstructural changes in stressed polymers

Highly oriented poly(p-phenylene benzobisthiazole) films were stressed in a miniature hydraulic tensile tester interfaced to a fast scanning Fourier transform infra-red spectrometer. The changes in relative intensity, polarization, frequency and shape of infrared bands have been useful in the elucidation of microstructures. With the short time resolution achievable, vibrational bandshape and frequency have been shown to change at different rates when an external stress was applied.     

几种表面活性剂在香精产品中的应用

本文阐述了几种表面活性剂在香精中应用的调配研究过程以及期间出现的不同现象,并对其进行了对比、比较.细述了这几种表面活性剂在应用过程中所出现的不同特征.     

吊车断裂弹簧钢板的焊接修复

吊车上的板弹簧是一个很重要的零件,它在反复应力下工作,承受较大的冲击负荷和振动,要求其应具有较高的疲劳强度、抗拉强度等性能。由于板弹簧为碳含量较高的合金钢,焊接性差,修复断裂的板弹簧较困难。某公司的一台日本进口TL-252型25t吊车,在使用二年内先后发现五块弹簧钢板断裂,给现场施工带来了不便和一定的经济损失。经制定严格的工艺,对断裂板弹簧成功地进行了焊接修复,修复后使用效果很好。1板簧材料及可焊性分析断裂的弹簧钢板为日本钢号SUP6,相当于我国的60Si2Mn弹簧钢,其化学成份见表1。表1SUP6钢的化学成份(%)C Si Mn S P …     

A Non-Line-of-Sight mitigation localization algorithm for sensor networks using clustering analysis

Non-Line-of-Sight propagation of wireless signal has an impact on measured distances in range-based localization and will bias the final localization results. A new localization algorithm is proposed in this paper to mitigate Non-Line-of-Sight errors when there are more than enough anchor nodes deployed around the node to be located. This algorithm utilizes multi-round clustering analysis to filter the pre-located estimators which derive from all possible subsets of measured distances. In each round, the method density-based spatial clustering of applications with noise is adopted. Simulations show that the proposed algorithm can effectively improve localization accuracy not only when the measured distances with Non-Line-of-Sight error are minor but also under the condition that all of them suffer random Non-Line-of-Sight error.     

Acidic and catalytic properties of niobic acid crystallized at low temperature

Niobic acid was crystallized at 120 °C for 48 h, which showed the largest acid amounts at higher acid strengths. The crystallized niobic acid calcined at 300 °C was found to show higher activity than uncrystallized niobic acid and niobic acid washed with water or treated with sulfuric acid or phosphoric acid for the dehydration of isopropanol and the esterification of ethanol with acetic acid.     

Studies of microhardness and mar resistance using a scanning probe microscope

Scanning probe microscopy (SPM) is in a period of rapid development. It shows great promise for characterizing coating surfaces. This paper describes modification of an SPM so that it can be used to mar the surfaces of coatings under controlled conditions and to characterize the mars. Mar resistance of coatings is analyzed in terms of a ‘three response, two mechanism model.' The three responses (fracture, elastic, and plastic) can be measured quantitatively using the SPM. Of the three responses, only two (fracture and plastic deformation) are marring mechanisms – elastic deformations recover instantaneously. In some cases mars resulting from plastic deformation may recover slowly with time or with immersion in water; this phenomenon is attributed to viscoelastic creep. Microhardness is also measured with the modified SPM. Some thermoset coatings appear to be substantially harder near their surfaces than in the mass of material, and such materials may respond quite differently to stress applied at different levels near the surface. This finding has important implications for all coating properties that are strongly influenced by the surface. A quantity called ‘micro mar resistance' is defined. It may be useful for comparing different coatings under specified conditions of marring. However, there can be no single quantity that expresses ‘mar resistance' of a coating under all conditions.     

加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

基于SOAP的企业异构信息系统集成

阐述了SOAP通信协议的构成和实现机制以及与相似协议的比较。基于它的跨平台的能力,将其运用于企业的分布式环境中,实现了异构信息系统间的互操作和跨部门的数据处理,提高企业数据处理的效能,同时为企业异构信息系统集成提供了新的方法。