主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

柴油机针阀体的乙炔低压渗碳

乙炔低压渗碳可以有效地避免在真空渗碳过程中产生炭黑和焦油，同时由于乙炔具有较高的供碳能力，使这一技术尤其适用于针阀体这样的小直径深盲孔零件。     

波动方程正演模型及应用

本采用声波方程，通过四阶有限差分近似，实现了复杂地质构造零炮距的数值模拟。中同时展示实际应用效果。     

稀土混合物水溶液中囊泡的形成

依据柠檬酸的螯合作用和乙二醇的空间位阻效应，获得了稀土混合物囊泡。并利用ＩＣＰ、ＴＥＭ、ＦＳ等仪器对囊泡的性能进行了研究，最后对囊泡的形成机理进行了讨论。     

计算机网络远程通信系统软硬件设计与实现

本文介绍一种新型远程通信系统，它克服了一般远程通信系统速度慢的缺点，将通信速度提高了８０多倍，同时，其硬件比一般远程通信系统简单，成本只有一般远程通信系统的一半左右，进一步提高了新型远程通信系统的性能价格比。在新型系统中精简了远程通信协议，提高了信道有效利用率；采用了各种行之有效的数据压缩算法，并加以改造，使之性能最佳；提供了程序远程透明执行功能，大大提高了系统的响应速度。     

CROSS-SPECTRAL MOMENT AND SVD METHODS ESTIMATING THE PARAMETERS OF CLOSE SINUSOIDS IN COLORED NOISE

The cross-spectral estimation methods are efficient in estimating the parameters of sinusoidal signals embedded in colored noise. But up to now, only FPT and cross-periodogram methods are used in this field, the modern auto-spectral estimation method is introduced into cross-spectral estimation in this paper, meanwhile the cross-correlation based Yule-Walker equation is proposed theoretically and the moment and singular-value decomposition (SVD)) algorithms for cross-spectral estimation have been developed. Finally, a numerical example is given for comparing the presented methods with the well-known Cadzow's SVD method.     

脉冲波形对流化床性能的影响

本文从理论上分析了矩形波和正弦脉波气流对流化床操作性能的影响，发现矩形波在一定条件下优于正弦波的规律，并用实际进行了验证。     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.     

镀铜／镍聚丙烯腈纤维填充复合材料电磁波屏蔽性能的研究

研究了镀铜／镍的聚丙烯腈纤维填充ＡＢＳ树脂制得的复合材料的导电性及电磁波屏蔽性能，复合材料的导电性主要与导电纤维的填加量有关，导电纤维与基体树脂间的相容状况、复合加工时某些工艺条件等对复合材料的导电性也有较大的影响，电磁波屏蔽性能随导电纤维填加量的增加而提高，加入适当的偶联剂有助于改善和复合材料的电磁波屏蔽性能。     

ATM交换机的硬件体系结构探讨

本文首先对ＡＴＭ的背景作了一个简单的介绍，接着阐述了ＡＴＭ和ＡＴＭ交换机的主要原理和技术，然后从硬件系结构的角度具体地分析了一种实验ＡＴＭ交换机是怎样ＡＴＭ技术的详细方法。