Novel antibacterial modalities against methicillin resistant Staphylococcus aureus derived from plants

Abstract

Methicillin-resistant Staphylococcus aureus (MRSA) is a notorious bacterial pathogen that induces high mortality and morbidity. Due to the emergence of multiple resistance, antibiotic treatments are rapidly becoming ineffective for the related infections. Natural products, especially those derived from plants, have been proven to be effective agents with unique antibacterial properties through different mechanisms. This review interprets the resistance mechanisms of MRSA with the aim to conquer public health threat. Further, recent researches about plant antimicrobials that showed remarkable antibacterial activity against MRSA are recorded, including the crude plant extracts and purified plant-derived bioactive compounds. Novel anti-MRSA modalities of plant antimicrobials such as alteration in efflux pump, inhibition of pyruvate kinase, and disturbance of quorum sensing in MRSA are also summarized which may be promising alternatives to antibacterial drug development in future.     

Use of mild-heat treatment following high-pressure processing to prevent recovery of pressure-injured Listeria monocytogenes in milk

This study examined the inactivation of Listeria monocytogenes in milk by high-pressure processing (HPP) and bacterial recovery during storage after HPP. We developed a technique to inhibit the bacterial recovery during storage after HPP (550 MPa for 5 min) using a mild-heat treatment (30-50 degrees C). Various mild-heat treatments were conducted following HPP to investigate the condition on which the bacterial recovery was prevented. Immediately after HPP of 550 MPa at 25 degrees C for 5 min, no L. monocytogenes cells were detected in milk regardless of the inoculum levels (3, 5, and 7 log(10)CFU/ml). However, the number of L. monocytogenes cells increased by >8 log(10)CFU/ml regardless of the inoculum levels after 28 days of storage at 4 degrees C. Significant recovery was observed during storage at 25 degrees C; the bacterial number increased by >8 log(10)CFU/ml after 3 days of storage in the case of an initial inoculum level of 7 and 5 log(10)CFU/ml. Even in the case of an initial inoculum level of 3 log(10)CFU/ml, the bacterial number reached the level of 8 log(10)CFU/ml after 7 days of storage. No bacterial recovery was observed with storage at 37 degrees C for 28 days. Milk samples were treated by various mild-heat treatments (30-50 degrees C for 5-240 min) following HPP of 550 MPa at 25 degrees C for 5 min, and then stored at 25 degrees C for 70 days. The mild-heat treatment (e.g., 37 degrees C for 240 min or 50 degrees C for 10 min) inhibited the recovery of L. monocytogenes in milk after HPP. No recovery of L. monocytogenes in milk was observed during 70-day storage at 25 degrees C in samples that received mild-heat treatments such as mentioned above following HPP (550 MPa for 5 min). Moreover, the mild-heat treatment conditions (temperature and holding time) required to inhibit the recovery of L. monocytogenes in milk was modelled using a logistic regression procedure. The predicted interface of recovery/no recovery can be used to calculate the mild-heat treatment condition to control bacterial recovery during storage at 25 degrees C after HPP (550 MPa for 5 min). The results in this study would contribute to enhance the safety of high-pressure-processed milk.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.     

A comparison of two-dimensional techniques for converting magnetocardiogram maps into effective current source distributions

The aim of this study was to develop a method for converting the pseudo two-dimensional current given by a current-arrow map (CAM) into the physical current. The physical current distribution is obtained by the optimal solution in a least mean square sense with Tikhonov regularization (LMSTR). In the current dipole simulation, the current pattern differences (ΔJ) between the results of the CAM and the LMSTR with several regularization parameters (α = 10(-1)-10(-15)) are calculated. In magnetocardiographic (MCG) analysis, the depth (z(d)) of a reconstruction plane is chosen by using the coordinates of the sinus node, which is estimated from MCG signals at the early p-wave. The ΔJs at p-wave peaks, QRS-complex peaks, and T-wave peaks of MCG signals for healthy subjects are calculated. Furthermore, correlation coefficients and regression lines are also calculated from the current values of the CAM and the LMSTR during p-waves, QRS-complex, and T-waves of MCG signals. In the simulation, the ΔJs (α ≈ 10(-10)) had a minimal value. The ΔJs (α = 10(-10)) at p-wave peaks, QRS-complex peaks, and T-wave peaks of MCG signals for healthy subjects also had minimal value. The correlation coefficients of the current values given by the CAM and the LMSTR (α = 10(-10)) were greater than 0.9. Furthermore, slopes (y) of the regression lines are correlated with the depth (z(d)) (r = -0.93). Consequently, the CAM value can be transformed into the LMSTR current value by multiplying it by the slope (y) obtained from the depth (z(d)). In conclusion, the result given by the CAM can be converted into an effective physical current distribution by using the depth (z(d)).     

Minor actinide transmutation in fast reactor metal fuels irradiated for 120 and 360 equivalent full-power days

An irradiation experiment on uranium–plutonium–zirconium (U–Pu–Zr) alloys containing 5 wt% or less minor actinides (MAs) and rare earths was carried out in the Phénix fast reactor. The isotope compositions of the fuel alloys irradiated for 120 and 360 equivalent full-power days (EFPDs) were chemically analyzed by inductively coupled plasma–mass spectrometry after 3.3–5.3 years of cooling. The results of chemical analysis indicated that the discharged burnups of the fuel alloys irradiated for 120 and 360 EFPDs were 2.1–2.5 and 5.3–6.4 at%, respectively. The changes in the isotopic abundances of plutonium, americium, and curium during the irradiation experiment were assessed to discuss the transmutation performance of MA nuclides added to U–Pu–Zr alloy fuel. Multigroup three-dimensional diffusion and burnup calculations accurately predicted the changes in these isotopic abundances after fuel fabrication. An evaluation of the MA transmutation ratio based on the results of chemical analysis revealed that the quantity of MA elements in the U–19Pu–10Zr–5MA (wt%) alloy decreased by about 20% during the irradiation experiment for 360 EFPDs.     

Degradation of organophosphorus pesticides in aqueous extracts of young green barley leaves (Hordeum vulgare L)

The degradation of the organophosphorus pesticides malathion, chlorpyrifos, guthion, diazinon, methidathion and parathion in an aqueous extract of young green barley leaves (Hordeum vulgare L) was monitored by gas chromatography. Aqueous solutions of various amounts of freeze‐dried young barley leaves containing 5.75 mg l⁻¹ of malathion were incubated at 37 °C and pH 7.4 over prolonged time periods. Over 95% of the malathion degraded in 4 h in a 3% (30 g l⁻¹) solution of young green barley leaves. When the barley solution was autoclaved at 120 °C for 25 min prior to the addition of malathion, no degradation of malathion was observed. When 10 mg l⁻¹ each of the above six pesticides was incubated in a 15% (150 g l⁻¹) solution of young green barley leaves for 3 h at 37 °C and pH 7.4, malathion and chlorpyrifos degraded 100%, whereas parathion (75%), diazinon (54%), guthion (41%) and methidathion (23%) showed lesser degrees of degradation. © 1999 Society of Chemical Industry     

Enzymatic hydrolysis of potato starches containing different amounts of phosphorus

The rapid hydrolysis of potato starches differing in phosphorus content, as well as sweet potato, cassava and yam starches, was accomplished by treatment of gelatinised starches with bacterial liquefying α-amylase at 50 °C for 1 h, followed by Bacillus licheniformis α-amylase at 55 °C up to 24 h, and then by glucoamylase at 40 °C for a further 24 h. Among the potato starches, the high-phosphorus starches showed higher starch resistant capacity than the medium-phosphorus starches, as well as other tuber and root starches. The hydrolysis rate of tuber and root starches was not greatly influenced by their amylose content and median granule size. Only glucose was detected in the almost completely hydrolysed tuber and root starch samples, indicating that the concomitant enzymes treatment could hydrolyse both the α-1,4 and α-1,6 linkages of the starches examined.     

Selective protein separation using siliceous materials with a trimethoxysilane-containing glycopolymer

A copolymer with α-D-mannose (Man) and trimethoxysilane (TMS) units was synthesized for immobilization on siliceous matrices such as a sensor cell and membrane. Immobilization of the trimethoxysilane-containing copolymer on the matrices was readily performed by incubation at high heat. The recognition of lectin by poly(Man-r-TMS) was evaluated by measurement with a quartz crystal microbalance (QCM) and adsorption on an affinity membrane, QCM results showed that the mannose-binding protein, concanavalin A, was specifically bound on a poly(Man-r-TMS)-immobilized cell with a higher binding constant than bovine serum albumin. The amount of concanavalin A adsorbed during permeation through a poly(Man-r-TMS)-immobilized membrane was higher than that through an unmodified membrane. Moreover, the concanavalin A adsorbed onto the poly(Man-r-TMS)-immobilized membrane was recoverable by permeation of a mannose derivative at high concentration.     

Estimation of dynamic tensile strength of sandstone

A series of dynamic tests on Kimachi sandstone for measuring dynamic tensile strength are carried out using underwater shock waves. An emulsion explosive is used as the source of dynamic loading, and a pipe filled with water was arranged between the explosive and a cylindrical specimen. The length of the pipe is varied to produce different strengths of the incidence shock wave into the specimen. The velocity at the free end of the specimen and the position of a crack are observed using a laser vibration meter and a high-speed camera, respectively. A simple method of estimating dynamic tensile strength is proposed based on experimental results. The complete velocity profile at the free end without fracture information is completely constructed under a simple assumption. The point at which the crack may be markedly activated has been defined by the velocity profile at the free end as “the averaged fracture point”. Instead of the distance from the free end to the fracture position, the distance from the free end to the averaged fracture point is employed in estimating dynamic tensile strength. The dynamic tensile strength of Kimachi sandstone was obtained by an improved method within strain rates of 10–40 s⁻¹. This study has indicated that the dynamic tensile strength varies with strain rate to the 1/3 power.