Sintering of Confined Silica in Oxidized Silicon Particles

We observed electron-beam-induced sintering of amorphous silica in oxidized submicrometer silicon particles and analyzed the nature of mass transport in linear and triangular particle assemblies. The movement of silica around the rigid crystalline cores occurs rapidly and fills the necks, but the relative core positions in the sintered product depends on the initial geometry of the confined oxide. However, a thin layer of silica remains stable against the flow.     

Studies on catalysis by molten metals. 14. Catalytic cracking of asphalts at low temperature

The catalytic effects of liquid metals for low-temperature (336 °C) asphalt-cracking have been examined using a semi-batch reactor. All the liquid metals examined (Bi, Cd, Ga, In, Pb and Sn) effectively catalysed the reduction of molecular weight with minimal gasification (<1 wt%). Gasification had a positive correlation with the reduction in molecular weight in the processed asphalts. The catalytic activities of liquid metals tor these two reactions were proportional to a parameter which represents the interaction between the atoms of the catalyst metal and the radicals formed in the course of the reaction. Mass flow among four fractions (saturates, aromatics, resins and asphaltenes) had two independent paths: conversion of resins to saturates and of aromatics to asphaltenes. The former path dominated when catalytic dehydrogenation activity was relatively low, whereas the latter dominated when the catalytic activity was high.     

An apparent ensemble effect in the oxidative coupling of methane on hydroxyapatites with incorporated lead

The introduction of small quantities of lead into calcium hydroxyapatite catalysts produces marked increases in the selectivity to C₂₊ hydrocarbons, while the conversion of methane remains relatively constant. Small surface concentrations of lead are sufficient to achieve C₂₊ selectivities of 80 and 90%, with oxygen and nitrous oxide, respectively, in contrast with 18 and 46%, respectively, obtained in the absence of lead. Since surface concentration of lead species sufficient to stabilize pairs of methyl radicals in close proximity to each other would be expected to facilitate the formation of C₂ hydrocarbons, an ensemble effect appears to be extant.     

D.s.c. investigation of the states of water in poly(vinyl alcohol-co-itaconic acid) membranes

The state of water in water-swollen poly(vinyl alcohol-co-itaconic acid) membranes, having various water contents from 0.31 to 0.83, was investigated by d.s.c. measurements and compared with those in water-swollen poly(vinyl alcohol) membranes. The amount of freezing water in the membranes was estimated by use of a relationship between the phase transition temperature and the enthalpy of the crystallization of supercooled water. The melting temperature of the water in the membranes immersed in urea and NaCl 0–2 mol l^?1 aqueous solutions was also determined by d.s.c. analysis. The present study proposes a method for estimating the solubilities of urea and NaCl in both of the freezing and the non-freezing water using the melting point depression of the freezing water in the membranes immersed in the solute solution.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

Effect of zeolite in surface discharge plasma on the decomposition of toluene

Toluene was decomposed in a surface discharge plasma reactor packed with various zeolites. The positioning effect of the zeolite bed was also investigated Reactor-B, in which the zeolite bed was located upstream, performed much better than Reactor-A, in which the zeolite bed was located downstream. Furthermore, the decomposition efficiency in Reactor-B increased with the capacity for toluene adsorption on zeolite, while that in Reactor-A did not. The toluene adsorbed in micropores was not decomposed effectively by direct electron impact, but was decomposed by active oxygen species generated in the plasma zone on the zeolite surface. A good correlation was also observed between toluene decomposition and ozone consumption in the downward-type reactor.     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Estimation of time-dependent input from neuronal membrane potential

The set of firing rates of the presynaptic excitatory and inhibitory neurons constitutes the input signal to the postsynaptic neuron. Estimation of the time-varying input rates from intracellularly recorded membrane potential is investigated here. For that purpose, the membrane potential dynamics must be specified. We consider the Ornstein-Uhlenbeck stochastic process, one of the most common single-neuron models, with time-dependent mean and variance. Assuming the slow variation of these two moments, it is possible to formulate the estimation problem by using a state-space model. We develop an algorithm that estimates the paths of the mean and variance of the input current by using the empirical Bayes approach. Then the input firing rates are directly available from the moments. The proposed method is applied to three simulated data examples: constant signal, sinusoidally modulated signal, and constant signal with a jump. For the constant signal, the estimation performance of the method is comparable to that of the traditionally applied maximum likelihood method. Further, the proposed method accurately estimates both continuous and discontinuous time-variable signals. In the case of the signal with a jump, which does not satisfy the assumption of slow variability, the robustness of the method is verified. It can be concluded that the method provides reliable estimates of the total input firing rates, which are not experimentally measurable.