Chemiluminescence detection for a microchip capillary electrophoresis system fabricated in poly(dimethylsiloxane)

Chemiluminescence (CL) detection integrated with a microchip capillary electrophoresis (MCE) system that was fabricated in poly(dimethylsiloxane) was demonstrated for chemical and biochemical analyses. Two model CL systems were involved here: metal ion-catalyzed luminol-peroxide reaction and dansyl species conjugated peroxalate-peroxide reaction. Different strategies based on three chip patterns (cross, cross combining with Y, and cross combining with V) to perform on-line CL detection for MCE were evaluated and compared in terms of sensitivity, reproducibility, and peak symmetry. The chip pattern of cross combining with Y proved to be promising for the luminol-peroxide CL system, while the chip pattern of cross combining with V was preferred for the peroxalate-peroxide system where CL reagent could not be effectively transported by electroosmotic flow. A detection limit down to submicromolar concentrations (midattomole) was achieved with good reproducibility and symmetric peak shape. Successful separation of three metal cations such as Cr(III), Co(II), and Cu(II) and chiral recognition of dansyl phenylalanine enantiomers within 1 min revealed distinct advantages of combining MCE with CL detection for rapid and sensitive analyses.     

Mechanistic study on analyte focusing by dynamic pH junction in capillary electrophoresis using computer simulation

Dynamic pH junction is an on-line preconcentration method in capillary electrophoresis (CE) based on electrokinetic focusing of weakly ionic analytes with in large sample volumes in a multisection electrolyte system. In this report, experiments and computer simulations were performed to gain a better insight of the analyte focusing mechanism when a dynamic pH junction was used. A computer program, SIMUL, was used to simulate the band-narrowing process of a group for phenol derivatives under optimized buffer conditions, which were compared with experimental results. Computer simulations revealed the formation of a sharp moving pH boundary within the sample zone causing efficient focusing of long plugs of weakly acidic analytes based on their pKa. These studies offered useful information for understanding the band-narrowing process by control of the depth and lifetime of the moving pH boundary as a function of analyte pKa, sample pH, and injection length. The change in pH of the sample within the capillary was also estimated by measuring the absorbances of an analyte at two different wave-lengths. Optimization of analyte focusing resulted in enhanced detection responses of about 60-450-fold in terms of peak heights for some phenol derivatives' relation to conventional injections. Dynamic pH junction represents a novel approach to control band dispersion (peak width) and selectivity (mobility) of specific analytes for high-resolution CE separations.     

Conventional detection of 2,4-dinitrophenol using quartz crystal microbalance

We present conventional detection of 2,4-dinitrophenol (DNP) for using the competitive reaction between DNP and DNP-conjugated albumin onto DNP antibody immobilized quartz crystal microbalance (QCM). This QCM method allows detection of DNP concentration in the range of 0.01 to 100 ng/ml; linear correlation obtains DNP concentration from 1 to 100 ng/ml.     

EACLE : Energy-Aware Clustering Scheme with Transmission Power Control for Sensor Networks

In this paper, we propose a new energy efficient clustering scheme with transmission power control named “EACLE” (Energy-Aware CLustering scheme with transmission power control for sEnsor networks) for wireless sensor networks, which are composed of the following three components; “EACLE clustering” is a distributed clustering method by means of transmission power control, “EACLE routing” builds a tree rooted at a sink node and sets the paths from sensor nodes taking energy saving into consideration, and “EACLE transmission timing control” changes the transmission timing with different levels of transmission power to avoid packet collisions and facilitates packet binding. With an indoor wireless channel model which we obtained from channel measurement campaigns in rooms and corridors and an energy consumption model which we obtained from a measurement of a chipset, we performed computer simulations to investigate the performance of EACLE in a realistic environment. Our simulation results indicate that EACLE outperforms a conventional scheme such as EAD (Energy-Aware Data-centric routing) in terms of communication success rate and energy consumption. Furthermore, we fully discuss the impact of transmission power and timing control on the performance of EACLE.     

New DC Chopper Circuits Using Fast-Switching Reverse-Conducting Thyristors for Low-Voltage DC Motor Control

Fast- switching reverse-conducting thyristors have been developed and used in dc chopper apparatus to control the speed of highvoltage dc traction motors. The newly developed dc chopper circuit and its application for low-voltage dc motor control are discussed. The fast-switching reverse-conducting thyristor is utilized as the main thyristor to control load current.     

A Gait Phase Measurement System Using Treadmill Motor Current

The article describes the development of a gait phase time-based split-belt treadmill measurement system. Conventional methods of measuring gait phase, such as the foot switch and force plate, require significant preparation and are costly. In this article, we propose a simple, cheap, and accurate gait phase measurement system that utilizes only the treadmill motor current value. Comparison of this algorithm with conventional methods reveals that the proposed algorithm is as accurate as the foot switch. Moreover, the proposed algorithm can estimate stance phase within a 0.2?s error of the measured value of the force plate in most cases (four out of five healthy subjects). This accuracy is higher than that of the foot switch which is widely used in the clinical field.     

Adsorption Desalination Quenches Global Thirst

The search for fresh or potable water remains a pressing concern throughout many regions of the world. Although most of the Earth's surface is covered by oceans, the effort to provide for the world's inhabitants with fresh or potable water seems to be insurmountable; at least one billion people do not have access to clean and fresh water. The World Health Organization (WHO) reported that about 41% of the Earth's population lives in water-stressed areas, and the number of people in the water scarce regions may climb to 3.5 billion by the year 2025. Thus, innovative and cost-effective desalination technologies for producing fresh water are needed to provide practical solutions.     

Chain packing in graphs

This paper discusses the complexity of packingk-chains (simple paths of lengthk) into an undirected graph; the chains packed must be either vertex-disjoint or edge-disjoint. Linear-time algorithms are given for both problems when the graph is a tree, and for the edge-disjoint packing problem when the graph is general andk = 2. The vertex-disjoint packing problem for general graphs is shown to be NP-complete even when the graph has maximum degree three andk = 2. Similarly the edge-disjoint packing problem is NP-complete even when the graph has maximum degree four andk = 3.     

High-velocity impact experiment of aluminum foam sample using powder gun

Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.     

Analysis of Organisation-Committed Human Error by Extended CREAM

This report analyses the results of the human error classification scheme of CREAM applied to organisation-committed human errors related to six departments. These human errors were not caused by the tasks spotlighted by CREAM, but were concentrated on managerial or administrative tasks, so that the authors have corrected and analysed the definitions and links of cause–effect relations related to the large organisation by means of an extended method of CREAM. Considering human errors on the basis of these analyses, findings have allowed the authors to come up with effective relations between organisation-related causal factors and person-related ones. This has demonstrated that organisation-caused human errors are sufficiently analysable by means of the extended method of CREAM.