Effect of Non-Equilibrium Condensation of Moist Air on Flow Field in Ludwieg Tube

The time-dependent behavior of non-equilibrium condensation of moist air through a Ludwieg tube with a diaphragm downstream is investigated by using a computational fluid dynamics work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The present computations represent the experimental flows well. The results obtained show that for an initial relative humidity over 40 %, the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to non-equilibrium condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity. Furthermore, the variations of condensation properties are also di     

Radiotherapy for carcinoma of the esophagus in aged patients

One hundred fifty-four patients with esophageal carcinoma were treated with either irradiation alone or irradiation combined with surgery at the University of Occupational and Environmental Health Hospital between January 1980 and February 1992. The number of patients 75 years old and older was 25. In patients 74 years old and younger, the overall five-year survival rate by Kaplan-Meier method was 24.5%. The survival rate was best in the patients who were treated by a combination of irradiation and surgery. In patients 75 years old and older, the one-year survival rate was 59%, and the three-year rate was 20%. Aged patients had a tendency to be worse in performance status, and there was no correlation between treatment modality and survival time. We conclude that radiotherapy is useful for treating esophageal cancer in aged patients particularly when maintenance of the quality of life is considered.     

Creep rupture properties of homopolymer,copolymer, and terpolymer based on poly(oxymethylene)

Polyacetal copolymers were prepared by cationic ring‐opening copolymerizations of 1,3,5‐trioxane (TOX) with 1,3‐dioxolane (DOX), and polyacetal terpolymers were prepared by terpolymerizations of TOX, DOX, and 2‐ethylhexyl glycidyl ether (EHGE). Polyacetal polymers with three different structures such as polyacetal homopolymers, polyacetal copolymers, and polyacetal terpolymers were compared in the mechanical properties and the creep characteristics, and discussed from the view point of the polymer structure. The polyacetal copolymers and the polyacetal terpolymers were determined by ¹H‐MNR measurement. About 80 mol % of DOX and EHGE amounts in feed were incorporated randomly into the each polymer. From the plots of the degree of crystallinity (X_c) versus the tensile strength, the tensile strength and crystallintiy of the polyacetal homopoymers are higher than those of the polyacetal copolymers and the polyacetal terpolymers. However, the tensile strength does not decrease linearly with a decrease in the crystallinity among the polyacetal polymers with three different structures, the polyacetal homopolymer, the polyacetal copolymers, and the polyacetal terpolymers. Creep rupture was characterized by the activation volume, υ_c, value in Zhurkov's equation, which can be estimated from the slope in the plots of load versus log (rupture time) at 80°C. The polyacetal polymers with higher molecular weight have larger values of the activation volume than those with lower molecular weight. When the activation volume values are compared among the polyacetal polymers with the same molecular weights, they increase in the following order: the polyacetal homopolymers < the polyacetal copolymers < polyacetal terpolymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Shock-consolidated TiO2 bulk with pure anatase phases fabricated by explosive compaction using underwater shockwave

Titanium dioxide (TiO₂) bulk with pure anatase phases was fabricated by an explosive compaction technique using an underwater shockwave. Dynamic shock pressure of 6 GPa was used to consolidate anatase TiO₂ powders. Its microstructural, crystalline structural and photocatalytic characteristics were observed and measured by various techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and photocatalytic activity measurement system. It was confirmed that the relative density of anatase TiO₂ compact is about 96% (3.73 g/cm³) of the theoretical density (3.89 g/cm³) and a strong surface bonding between particles is formed by a shock energy. In X-ray diffraction analysis, high purity anatase phases, broadened peaks due to lattice defects and decreased crystallite size were found. For the photocatalytic activities, the anatase TiO₂ compact was quite excellent compared to the commercial sintered TiO₂ bulk.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Preparation of surfactant-free vinyl polymers by conventional emulsion polymerization using hydrolysable emulsifiers

Emulsion polymerizations of several vinyl monomers, styrene, methyl methacrylate, butyl methacrylate, butyl acrylate, and vinyl acetate, in water using alkali–hydrolysable cationic surfactants with a betaine ester group (1-alkoxycarbonylmethyl)trimethylammonium chlorides, as emulsifiers were carried out and properties of the resulting latices and the polymers recovered by hydrolysis and salting out were investigated. There were little influences of the surfactants and monomers used here on the polymerizations, forming stable and monodisperse latices with a mean diameter of ca. 70 nm and giving a high molecular weight of polymers at high yields. All polymers were precipitated and recovered by adding a small amount of sodium hydroxide into the latex solutions contained little amount of ionic species. Solvent-cast films of the polymers were found to have surfaces as hydrophobic as those for the corresponding pure polymers prepared by bulk polymerization.