A 600-MHz 54×54-bit multiplier with rectangular-styledWallace tree

This paper presents an efficient layout method for a high-speed multiplier. The Wallace-tree method is generally used for high-speed multipliers. In the conventional Wallace tree, however, every partial product is added in a single direction from top to bottom. Therefore, the number of adders increases as the adding stage moves forward. As a result, it generates a dead area when the multiplier is laid out in a rectangle. To solve this problem, we propose a rectangular Wallace-tree construction method. In our method, the partial products are divided into two groups and added in the opposite direction. The partial products in the first group are added downward, and the partial products in the second group are added upward. Using this method, we eliminate the dead area. Also, we optimized the carry propagation between the two groups to realize high speed and a simple layout, We applied it to a 54×54-bit multiplier. The 980 μm×1000 μm area size and the 600 MHz clock speed have been achieved using 0.18 μm CMOS technology     

The synthesis of bulk material through explosive compaction for making intermetallic compound Ti5Si3 and its composites

The possibility of synthesizing Ti₅Si₃ from mixed elemental powders and the fabrication of its composites by explosive compaction is discussed. A new technique using underwater shock waves was developed and it was found to exercise better control over the influencing parameters. Two processes were employed viz., (1) direct shock-induced reaction and (2) explosive compaction followed by heat treatment. The methodology to produce bulk material by the above two processes are reported. Ti₅Si₃ intermetallic synthesized by the two processes reveals high hardness than commercially available Ti₅Si₃.     

A twin slot antenna on a layered substrate coupled to a microstrip feed line

A method is described for calculating the input impedance as seen by the detector for a twin slot antenna structure. This technique is then used to analyze several twin slot antenna configurations, leading to improved performance.     

TiO2 thin films using organic liquid materials prepared by Hot-Wire CVD method

TiO₂ thin films prepared by Hot-Wire CVD method have been studied as a protecting material of transparent conducting oxide (TCO) against atomic hydrogen exposures for the fabrications of Si thin film solar cells. It was found that electrical conductivity of the films at room temperature reached a value of 0.4 S/cm. This value is 2-3 orders of magnitude higher than that of TiO₂ films prepared by RF magnetron sputtering and electron-beam evaporation methods in our previous works. The conductivity improvement seems to be partly due to the enlargement of TiO₂ crystallites.     

A 144-Mb, eight-level NAND flash memory with optimized pulsewidthprogramming

We report a fast-programming, compact sense and latch (SL) circuit to realize an eight-level NAND flash memory. Fast programming is achieved by supplying optimized voltage and pulsewidth to the bit lines, according to the programming data. As a result, all data programming is completed almost simultaneously, and 0.67-MB/s program throughput, which is 1.7 times faster than conventional program throughput, is achieved. The compact layout of the SL circuit is made possible by four 3-bit latches sharing one unit of the read/verify control circuit. Using these techniques, we fabricated a 144-Mb, eight-level NAND flash memory using a 0.35-μm CMOS process, resulting in a 104.2-mm² die size and a 1.05-μm² effective cell size     

Low-dose N omega-nitro-L-arginine methyl ester treatment improves survival rate and decreases myocardial injury in a murine model of viral myocarditis induced by coxsackievirus B3

Recent reports demonstrated the expression of inducible-type NO synthase in the heart of viral myocarditis. Since NO has multiple biological actions, a substantial amount of NO produced in the diseased heart may act either as a cytotoxic or as a cytoprotective molecule in the process of myocarditis. In the present study, we examined the effect of inhibition of NO synthesis on the mortality and the extent of myocardial injury in a murine model of coxsackievirus B3-induced myocarditis. We fed the infected mice drinking water containing a relatively low concentration (0.37 mmol/L) of N omega-nitro-L-arginine methyl ester (L-NAME) for 14 days after virus inoculation. This dose of L-NAME did not change virus titers in the heart. However, L-NAME-fed mice showed a significant reduction in mortality compared with those fed normal drinking water (nontreated mice). On the contrary, mice given a higher concentration of L-NAME (3.7 mmol/L) exhibited increased mortality. In addition, mice fed a low concentration of L-NAME showed reductions in the severity of heart failure and in the area of myocardial necrosis. Although systemic blood pressure was reduced in nontreated mice, in mice fed a low concentration of L-NAME, it was maintained at a level similar to that in uninfected control mice, L-NAME-treated mice also exhibited a reduction in the degree of inflammatory cell infiltration associated with decreased production of tissue prostaglandin E2 levels in the heart compared with nontreated mice. Therefore, NO is likely to be involved in the pathogenic mechanisms of myocardial injury and resultant cardiac dysfunction in a murine model of coxsackievirus B3-induced viral myocarditis.     

Analysis of space-dependent characteristics of motion-compensatedframe differences based on a statistical motion distribution model

Although it has been observed that motion-compensated frame differences increase toward block boundaries and overlapped block motion compensation (OBMC) has been shown to provide reduced blocking artifacts as well as improved prediction accuracy, there is almost no satisfactory theoretical basis that clearly interprets the space-dependent characteristics of motion-compensated frame differences, nor have the theoretical aspects of OBMC been investigated thoroughly. We first interpret the space-dependent characteristics of motion-compensated frame differences based on a novel statistical motion distribution model. We then apply the statistical motion distribution model to the analysis of prediction efficiency of OBMC. Through the analysis, we prove theoretically that OBMC can reduce and equalize the motion-compensated frame differences across a block. The analytical results are justified by empirical experiments with typical image sequences.     

Schottky-biased, optically controlled coplanar waveguide phase-shifter

Phase shift measurements of a Schottky-biased, optically controlled coplanar waveguide (CPW) phase-shifter are presented. A prototype device consisting of a CPW on top of a lightly doped GaAs epilayer on a semi-insulating GaAs substrate was fabricated and tested. The highest phase shift obtained with an illuminating optical intensity of 4mW/cm/sup 2/ was 120 degrees at 40 GHz for a 1 cm-long device.<>     

Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.