纳米SiO2粉体的制备与研究

纳米SiO2粉体的制备是以硅酸钠和盐酸为原料，添加适宜的稳定剂(非离子表面活性剂)和分散剂，在适宜的pH值和温度下，采用化学沉淀法合成。研究表明，要得到性能优良纳米的SiO2粉体，最佳工艺条件为：温度20～40℃，pH=6，反应液质量浓度P1=20g／L，P2=1．20g／L，反应时间15min。结果表明：制备的纳米SiO2粒径30～50nm，比表面积大，分散性好，质量优良，可达到产业化的生产。     

Studies of structure and cycleability of LiMn2O4 and LiNd0.01Mn1.99O4 as cathode for Li-ion batteries

Lithium manganese oxides LiMn₂O₄ and rare earth elements doped LiNd_0.01Mn_1.99O₄ were synthesized by microwave method. The structure and the electrochemical performances of the samples were characterized. XRD data shows both samples exhibit the same pure spinel phase. But due to the introduction of Nd³⁺ ion into the unit cell, the lattice parameter of the Nd-doped spinel was larger than that of the undoped one. The two samples had a similar morphology including small particle size and homogeneous particle distribution as tested by SEM. The cyclic voltammmetry and constant-current charge-discharge tested that Nd-doped spinel displayed a better reversibility and cycleability.     

让设计成为科学、艺术、时尚融合的载体——记北京服装学院教师作品展

本文结合北京服装学院2008年在中国美术馆举办的首届教师作品展,就学校的办学理念、办学特色、创新教育、优势互补和理论研讨等方面展开论述。不仅彰显了北京服装学院的学科优势,而且突出了学校在“奥运”和“神七”设计中贡献社会的浓重一笔。同时,也强调了学校对传统与时尚、艺术与科学、民族与世界融为一炉的设计理念的高度重视。     

A Performance Evaluation of Classic Convolutional Neural Networks for 2D and 3D Palmprint and Palm Vein Recognition

Palmprint recognition and palm vein recognition are two emerging biometrics technologies. In the past two decades, many traditional methods have been proposed for palmprint recognition and palm vein recognition, and have achieved impressive results. However, the research on deep learning-based palmprint recognition and palm vein recognition is still very preliminary. In this paper, in order to investigate the problem of deep learning based 2D and 3D palmprint recognition and palm vein recognition in-depth, we conduct performance evaluation of seventeen representative and classic convolutional neural networks (CNNs) on one 3D palmprint database, five 2D palmprint databases and two palm vein databases. A lot of experiments have been carried out in the conditions of different network structures, different learning rates, and different numbers of network layers. We have also conducted experiments on both separate data mode and mixed data mode. Experimental results show that these classic CNNs can achieve promising recognition results, and the recognition performance of recently proposed CNNs is better. Particularly, among classic CNNs, one of the recently proposed classic CNNs, i.e., EfficientNet achieves the best recognition accuracy. However, the recognition performance of classic CNNs is still slightly worse than that of some traditional recognition methods.

     

Improved Computational Model of Grid Cells Based on Column Structure

To simulate the firing pattern of biological grid cells, this paper presents an improved computational model of grid cells based on column structure. In this model, the displacement along different directions is processed by modulus operation, and the obtained remainder is associated with firing rate of grid cell. Compared with the original model, the improved parts include that: the base of modulus operation is changed, and the firing rate in firing field is encoded by Gaussian-like function. Simulation validates that the firing pattern generated by the improved computational model is more consistent with biological characteristic than original model. Besides, the firing pattern is badly influenced by the cumulative positioning error, but the computational model can also generate the regularly hexagonal firing pattern when the real-time positioning results are modified.     

时效对接触线用Cu-Ag-Cr合金性能的影响

分析了固溶温度、时效及时效前冷变形量对Cu - 0 1 %Ag - 0 1 %Cr接触线用合金性能的影响 ,结果表明 :经 870℃固溶、 40 %～ 5 0 %冷变形及 480℃× 1 5h时效处理后 ,合金可获得良好的综合性能。     

Ni-Cr-Fe-Si-B合金涂层及铝青铜基体熔合区组织的研究

采用钨极氩弧焊方法在铝青铜基体上施焊了Ni—Cr-Fe-Si—B合金涂层，并运用金相显微镜、扫描电子显微镜及能谱分析了喷涂层、熔合区及热影响区的组织形貌和成分分布。结果表明，喷焊时，在涂层与基体界面两侧各组元均发生了明显的扩散，Cu、Ni组元间可相互取代，基体融合区组织的基本组成仍为α (α γ2)，但同时也形成了Cu2FeAl7、NiAl3等新相，且融合区组织细小，涂层与基体间为冶金态结合。     

浅论综合康复机构网络系统规划

随着互联网络的迅猛发展,各康复机构的业务正不断向外延伸,而综合康复机构在发展过程中受到信息网络系统的限制.该文论述了如何解决既能按照国家有关规定将内外网络物理隔离,而又能实现内外网络的信息系统数据安全交换,使现有的资源得到最大利用.     

基于单片机的机房温湿度监控系统

本文阐述了基于STM32F103c8t6的机房温湿度监控系统的设计原理。该系统主要以STM32F103c8t6单片机为核心,以DHT11温湿度传感器作为采集系统,把实时温度、湿度数据显示在OLED屏幕上。如果温湿度数值超过设置的阈值,会通过无线通讯模块GSM800C发送信息给用户,从而对交警中心机房内的环境实行实时监控,使环境内的温湿度得到有效监控。