隧道挖掘中采用补偿灌浆的实例

在英国伦敦多克兰斯轻便铁路刘易舍姆延长线（DLR－LWE）双隧道掘进工程中，在敏感建筑物下进行了补偿灌浆，以防止隧道开挖引起的过度沉降。但是，过度灌浆也会对隧道下部施加超越。介绍了由隧道掘进承包商所编辑的关于地面和建筑物沉降以及由补偿灌浆引起的隧道衬砌变形的详细现场监测数据。     

Factors affecting cloud point analysis of palm oleins

Some of the factors affecting cloud point determination of palm oleins are described. These are the type of container used, method of stirring, rate of stirring and bath temperature. The repeatability and reproducibility standard deviations of the method are determined from collaborative trials. Recommendations for the test are made to reduce the large variations among laboratories.     

A review of anode materials development in solid oxide fuel cells

High temperature solid oxide fuel cell (SOFC) has prospect and potential to generate electricity from fossil fuels with high efficiency and very low greenhouse gas emissions as compared to traditional thermal power plants. In the last 10 years, there has been significant progress in the materials development and stack technologies in SOFC. The objective of this paper is to review the development of anode materials in SOFC from the viewpoint of materials microstructure and performance associated with the fabrication and optimization processes. Latest development and achievement in the Ni/Y₂O₃-ZrO₂ (Ni/YSZ) cermet anodes, alternative and conducting oxide anodes and anode-supported substrate materials are presented. Challenges and research trends based on the fundamental understanding of the materials science and engineering for the anode development for the commercially viable SOFC technologies are discussed.     

Effect of cooking method on the fatty acid profile of New Zealand King Salmon (Oncorhynchus tshawytscha)

Farmed New Zealand King Salmon (Oncorhynchus tshawytscha) was prepared according to common consumer techniques; raw, poached, steamed, microwaved, pan fried (no added oil), oven baked (no added oil) and deep fried (in sunflower oil). The fatty acid profile was investigated to determine the optimal preparation techniques to achieve both optimal sensory and nutritional qualities, in particular the levels of long chain polyunsaturated omega-3 fatty acids. The modified Bligh and Dyer method was used for lipid extraction and the Hartman and Lago method for FAMES preparation. Fatty acid composition was determined by gas chromatography. There were moisture and lipid losses during cooking amongst the different methods. The fatty acid profile showed only minor differences between the methods apart from an increase in PUFA in the deep fried salmon due to linoleic acid uptake from the frying oil. In all the cooking methods the omega-3 fatty acids were well preserved. However, deep fried showed the lowest amounts of omega-3 fatty acids. As the results showed good preservation of omega-3 fatty acids regardless of cooking method, there may be possible “internal protection” of omega-3 fatty acids in King Salmon that warrants future research.     

Encapsulation of food grade antioxidant in natural biopolymer by electrospinning technique: A physicochemical study based on zein–gallic acid system

Gallic acid was successfully incorporated into zein ultra-fine fibres at different loading amount (5%, 10% and 20%) in order to develop an encapsulating technology for functional ingredient delivery using electrospinning. The produced fibres exhibit diameters ranging from 327 to 387 nm. The physical and thermal properties of encapsulated gallic acid were determined by X-ray diffraction (XRD) and differential scanning calorimetry (DSC); and the interaction between gallic acid and zein was attested by attenuated total reflection-Fourier transform infrared (ATR-FTIR). Thermogravimetric analysis (TGA) demonstrated a different thermal stability of the fabricated complex before and after the gallic acid incorporation. Lastly, the 1,1′-diphenyl-2-picrylhydrazyl (DPPH) assay showed that the gallic acid had retained its antioxidant activity after incorporation in zein electrospun fibres. Overall, electrospinning technique had shown promising results as an efficient and effective method for the preparation of sub-micron structured encapsulated functional ingredient that may find uses in food industry.     

Pt and Ru dispersed on LiCoO2 for hydrogen generation from sodium borohydride solutions

Nano-sized platinum and ruthenium dispersed on the surface LiCoO₂ as catalysts for borohydride hydrolysis are prepared by microwave-assisted polyol process. The catalysts are characterized by transmission electron microscopy (TEM), X-ray diffractometry (XRD) and X-ray photoelectron spectroscopy (XPS). Very uniform Pt and Ru nanoparticles with sizes of <10 nm are dispersed on the surface of LiCoO₂. XRD patterns show that the Pt/LiCoO₂ and Ru/LiCoO₂ catalysts only display the characteristic diffraction peaks of a LiCoO₂ crystal structure. Results obtained from XPS analysis reveal that the Pt/LiCoO₂ and Ru/LiCoO₂ catalysts contain mostly Pt(0) and Ru(0), with traces of Pt(IV) and Ru(IV), respectively. The hydrogen generation rates using low noble metal loading catalysts, 1 wt.% Pt/LiCoO₂ and 1 wt.% Ru/LiCoO₂, are very high. The hydrogen generation rate using Ru/LiCoO₂ as a catalyst is slightly higher compared with that of Pt/LiCoO₂.     

Pd nanoparticles supported on PDDA-functionalized carbon black with enhanced ORR activity in alkaline medium

Pd/C catalyst with small particle size, high dispersion and high wt.% of metal was in situ synthesized by a simple aqueous phase reduction method. Poly(diallyldimethylammonium chloride) PDDA-functionalized carbon black was used as a support material for the in situ deposition of Pd nanoparticles by means of electrostatic attraction. The catalysts were characterized by transmission electron microscopy, X-ray diffractometry and X-ray photoelectron spectroscopy, cyclic voltammetry and rotating disc electrode test. The results indicated that Pd nanoparticles with an average size of 2.09 nm were uniformly dispersed onto the carbon black with a metal weight percentage of ∼30 wt.%. The prepared Pd/C catalyst has showed remarkably larger electrochemical surface area and higher and more stable ORR activity as compared to commercial Pd/C catalyst and commercial Pt/C catalyst in alkaline media, which was believed to be a promising alternative to Pt-based catalyst used in alkaline fuel cell.     

Design of biorefinery systems for conversion of corn stover into biofuels using a biorefinery engineering framework

Unlocking the potential and value of lignocellulosic residues is an important step in making biorefineries economically and environmentally promising. This calls for a holistic and systematic approach in designing sustainable industrial systems. In this work, biorefinery systems via biochemical route (acetone–butanol–ethanol or ABE system) and thermochemical route (gasification and mixed alcohols or GMA system) for converting corn stover into biofuels have been designed using a Sustainable Engineering Framework. The framework involves eight main steps: (1) design problem definition, (2) data collection, (3) process synthesis and simulation, (4) process integration, (5) resource recovery from residues, (6) utility system design, (7) economic and environmental modelling and (8) economic value and environmental impact margin analysis for decision making. Consideration of resource recovery from biorefinery waste streams has proven to be the key in making biorefineries self-sustaining and with low environmental impacts. Simultaneous economic and environmental feasibility assessment at the early stage of process design is highly envisaged. The cost of biofuel production in the ABE system has been found to be 49.2 US$/GJ and 69.9 US$/GJ in the GMA system. The greenhouse gas emissions are 46.2 g CO₂-eq/GJ for ABE and 19.0 g CO₂-eq/GJ for GMA, lower than gasoline (85 g CO₂-eq/GJ). The GMA system is not economically compelling though with high environmental benefit, while the ABE system has shown to be both economically and environmentally feasible.     

Multiple-wavelength integration in InGaAs-InGaAsP structures using pulsed laser irradiation-induced quantum-well intermixing

In this paper, we present the characteristics of a quantum-well intermixing technique using pulsed-photoabsorption-induced disordering. Photoluminescence, micro-Raman spectroscopy, and transmission electron microscopy were used to characterize the process. Using this technique, a differential wavelength shift between the intermixed and nonintermixed regions of over 160 nm has been observed from InGaAs-InGaAsP heterostructures. It was found from the micro-Raman measurements that a spatial resolution of better than 2.5 /spl mu/m can be achieved. A theoretical model has been developed to estimate the spatial resolution limit. Theoretical analysis has also been performed to investigate the effect of laser irradiation on the degree of intermixing in InGaAs-InGaAsP structures. To verify the capability of this process in monolithic photonic integration, high-quality bandgap tuned lasers, two-section extended cavity lasers, and multiple-wavelength laser chips have been fabricated.