Assessment of river Po sediment quality by micropollutant analysis

Trace metals, PCB congeners and DDT homologues were determined in composite sediment samples collected from 10 representative sites along the river Po in two separate seasons. The aim was to identify the most anthropogenically impacted areas for future monitoring programmes and to aid development of Italian sediment quality criteria. The surface samples were collected during low flow conditions. Trace metal concentrations were assayed by electrothermal (Cd, Co, Cr, Cu, Ni, Pb), flame (Fe, Mn, Zn) or hydride generation (As) atomic absorption spectrometry after microwave assisted acid digestion. Hg was determined on solid samples by automated analyser. Organic microcontaminants were determined by gas-chromatography with 63Ni electron capture detector after Soxhlet extraction. Concentrations of trace metals, total PCB and DDT homologues showed two distinct peaks at the sites immediately downstream of Turin and Milan, respectively, and in each case decreased progressively further downstream. Principal component analysis identified three major factors (from a multi-dimensional space of 35 variables) which explained 85-90% of the total observed variance. The first and second factors corresponded to anthropogenic inputs and geological factors on sediment quality; the third included seasonal processes of minor importance. Sediment quality assessment identified Cd, Cu, Hg, Pb, Zn and organic microcontaminants as posing the most serious threats to river sediment quality. A reference site within the Po basin provided useful background values. Moderate pollution by organochlorine compounds was ascribed both to local sources and to atmospheric deposition.     

Ultrastructure of multicellular dwarf males with external gametangium in Oedogonium macrandrium (Oedogoniales,Chlorophyta)

This is the first comprehensive ultrastructural study on dwarf males with external gametangia in the ge in the genus Oedogonium, from androspore germination to the liberation of mature male gametes. The ultrastructure of the process in O. macrandrium Wittrok is similar to that of Bulbochaete hiloensis (Nordstedt) Tiffany, butwith two remarkable differences. In O. macrandrium : 1) instead of a true transverse wall, only condensed mucilage appears between the gametes of each antheridial cell, and 2) the cell wall between the basal cell and the basal most antheridial cell has simple plasmodesmata similar to those present in the transverse walls of vegetative cells, which are absent in B. hiloensis.     

Nitrogen concentration and nitrate/ammonium ratio affect yield and change the oxalic acid concentration and fatty acid profile of purslane (Portulaca oleracea L.) grown in a soilless culture system

Purslane is an excellent source of omega‐3 fatty acids, amino acids and vitamins. The aim of this research was to study the effect of different nitrogen levels and NO₃⁻‐N/NH₄⁺‐N ratios in the nutrient solution on the yield and on the oxalic acid content and fatty acid profile in purslane grown in a soilless culture system. Two experiments were carried out to test different levels of nitrogen: (1) 8–12–16 mmol L⁻¹ and (2) 0–12–24–36 mmol L⁻¹. A third experiment was carried out maintaining the N level fixed (12 mmol L⁻¹) but varying the NO₃⁻‐N/NH₄⁺‐N ratio: 60:40, 40:60, 0:100. The results indicated that plants grew with increasing nitrogen level up to 36 mmol L⁻¹. Nitrogen supplied in both NO₃⁻ and NH₄⁺ forms produced bigger plants than N supplied in NH₄⁺ form only. Nitrogen did not significantly influence the polyunsaturated fatty acid content in the canopy. Significant trends were found for α‐linolenic acid (LNA; 18:3 n‐3) and linoleic acid (LA; 18:2 n‐6), indicating a favorable accumulation of omega‐3 fatty acids with increasing N; palmitic acid decreased by increasing N and by switching the NO₃⁻/NH₄⁺ ratio towards the NH₄⁺ level in the nutrient solution, but using 0:100 NO₃⁻/NH₄⁺, decreased plant quality. Increasing N lowered oxalic acid production and palmitic acid content, enhancing purslane nutritional quality. Keeping a high N level in the nutrient solution with a 40:60 NO₃⁻/NH₄⁺ ratio would give the best results in terms of yield, oxalic acid concentration and fatty acid profile. Copyright © 2006 Society of Chemical Industry     

Synthesis and Biological Evaluation of Papain‐Family Cathepsin L‐Like Cysteine Protease Inhibitors Containing a 1,4‐Benzodiazepine Scaffold as Antiprotozoal Agents

Novel papain‐family cathepsin L‐like cysteine protease inhibitors endowed with antitrypanosomal and antimalarial activity were developed, through an optimization study of previously developed inhibitors. In the present work, we studied the structure–activity relationships of these derivatives, with the aim to develop new analogues with a simplified and more synthetically accessible structure and with improved antiparasitic activity. The structure of the model compounds was significantly simplified by modifying or even eliminating the side chain appended at the C3 atom of the benzodiazepine scaffold. In addition, a simple methylene spacer of appropriate length was inserted between the benzodiazepine ring and the 3‐bromoisoxazoline moiety. Several rhodesain and falcipain‐2 inhibitors displaying single‐digit micromolar or sub‐micromolar antiparasitic activity against one or both parasites were identified, with activities that were one order of magnitude more potent than the model compounds.     

Influence of concrete strength and length/diameter on the axial capacity of CFT columns

This paper presents an experimental analysis of the confinement effects in steel–concrete composite columns regarding two parameters: concrete compressive strength and column slenderness. Sixteen concrete-filled steel tubular columns with circular cross section were tested under axial loading. The tested columns were filled by concrete with compressive strengths of 30, 60, 80, and 100 MPa, and had length/diameter ratios of 3, 5, 7, and 10. The experimental values of the columns’ ultimate load were compared to the predictions of 4 code provisions: the Brazilian Code NBR 8800:2008, Eurocode 4 (EN 1994-1-1:2004), AINSI/AISC 360:2005, and CAN/CSA S16-01:2001. According to the results, the load capacity of the composite columns increased with increasing concrete strength and decreased with increasing length/diameter ratio. In general, the code provisions were highly accurate in the prediction of column capacity. Among them, the Brazilian Code was the most conservative, while Eurocode 4 presented the values closest to the experimental results.     

Composite connections in slim-floor system: An experimental study

This paper reports the results of full-scale tests in beam-to-column connections for composite slim floor systems, including tests on Bare Steel connection and composite connection. The tested system consists of a concrete-filled composite column and a composite floor where an asymmetric steel beam is connected to a composite column by shear steel plates. Tests results previously obtained on partially encased composite beams were used to define the position of the headed studs in the slim floor system. Based on the obtained results of connections, the composite and Bare Steel connection behaved as semi-rigid and nominally pinned respectively. The tests results also indicated a significant contribution of the slim floor to the moment capacity of the connection.     

Efficient and stable nitritation and denitritation of ammonium-rich sludge dewatering liquor using an SBR with continuous loading

Separate treatment of dewatering liquor from anaerobic sludge digestion significantly reduces the nitrogen load of the main stream and improves overall nitrogen elimination. Such ammonium-rich wastewater is particularly suited to be treated by high rate processes which achieve a rapid elimination of nitrogen with a minimal COD requirement. Processes whereby ammonium is oxidised to nitrite only (nitritation) followed by denitritation with carbon addition can achieve this. Nitrogen removal by nitritation/denitritation was optimised using a novel SBR operation with continuous dewatering liquor addition. Efficient and robust nitrogen elimination was obtained at a total hydraulic retention time of 1 day via the nitrite pathway. Around 85-90% nitrogen removal was achieved at an ammonium loading rate of 1.2 kg [corrected] NH(4)(+)-N m(-3)d(-1). Ethanol was used as electron donor for denitritation at a ratio of 2.2 g COD g(-1) N removed. Conventional nitritation/denitritation with rapid addition of the dewatering liquor at the beginning of the cycle often resulted in considerable nitric oxide (NO) accumulation during the anoxic phase possibly leading to unstable denitritation. Some NO production was still observed in the novel continuous mode, but denitritation was never seriously affected. Thus, process stability can be increased and the high specific reaction rates as well as the continuous feeding result in decreased reactor size for full-scale operation.     

Rugged, portable tungsten coil atomic emission spectrometer

Tungsten coil atomic emission spectrometry is an ideal technique for field applications because of its simplicity, low cost, low power requirement, and independence from cooling systems. A new, portable, compact design is reported here. The tungsten coil is extracted from an inexpensive 24 V, 250 W commercial light bulb. The coil is housed in a small, aluminum cell. The emission signal exits from a small aperture in the cell, while the bulk of the blackbody emission from the tungsten coil is blocked. The resulting spectra exhibit extremely low background signals. The atomization cell, a single lens, and a hand-held charge coupled device (CCD) spectrometer are fixed on a 1 × 6 × 30 cm ceramic base. The resulting system is robust and easily transported. A programmable, miniature 400 W solid-state constant current power supply controls the temperature of the coil. Fifteen elements are determined with the system (Ba, Cs, Li, Rb, Cr, Sr, Eu, Yb, Mn, Fe, Cu, Mg, V, Al, and Ga). The precision ranges from 4.3% to 8.4% relative standard deviation for repetitive measurements of the same solution. Detection limits are in the 0.04 to 1500 μg/L range. Accuracy is tested using standard reference materials for polluted water, peach leaves, and tomato leaves. For those elements present above the detection limit, recoveries range from 72% to 147%.     

Magnetoelectric coupling in ordered arrays of multilayered heteroepitaxial BaTiO₃/CoFe₂O₄ nanodots

Fully epitaxial BaTiO(3)/CoFe(2)O(4) ferroelectric/ferromagnetic multilayered nanodot arrays, a new type of magnetoelectric (ME) nanocomposite with both horizontal and vertical orderings, were fabricated via a stencil-derived direct epitaxy technique. By reducing the clamping effect, ferroelectric domain modification and distinct magnetization change proportional to different interfacial area around the BaTiO(3) phase transition temperatures were found, which may pave the way to quantitative introducing of ME coupling at nanoscale and build high density multistate memory devices.