Analysis of color symbology from the perspective of cultural semiotics focused on Korean costume colors according to the cultural changes

The purpose of this study was to analyze the symbolization of colors as cultural codes, based on costume colors. In order to study the significance of colors in cultural changes, we carried out a quantitative analysis and interpreted it from the perspective of cultural semiotics. The range of this study was focused on Korean costume colors, over diverse diachronic stages of Korean culture. For this study 1535 color samples were collected, measured with a spectrophotometer, and analyzed quantitatively according their diachronic stages of origin. As a result, red, blue, and yellow were found to be the most frequently used colors during the Chosun Dynasty, a period based on Confucianism. These colors acted as cultural codes with cultural significance. During the Modern times pink, light blue, and black increased in frequency and represented the reception of western culture, the changing sex role of women in society, and utilitarianism. In these days, neutral colors and grayish tones of all colors are the most significant colors of high frequency. The use of such colors is closely related to industrialization, mechanization, functionalism, and the changes of women's sex roles in the societies. They are used as cultural codes, especially to emphasize a rational and masculine image rather than a feminine image. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 71–79, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20290     

A micromachined electrochemical sensor for free chlorine monitoring in drinking water.

In this work, we designed, fabricated and tested a disposable, flow-through amperometric sensor for free chlorine determination in water. The sensor is based on the principle of an electrochemical cell. The substrate, as well as the top microfluidic layer, is made up of a polymer material. The advantages include; (a) disposability from low cost; (b) stable operation range from three-electrode design; (c) fluidic interconnections that provide on line testing capabilities; and (d) transparent substrate which provides for future integration of on-chip optics. The sensor showed a good response and linearity in the chlorine concentration ranging from 0.3 to 1.6 ppm, which applies to common chlorination process for drinking water purification.     

Time series modeling and spectrum analysis for chatter mode in endmilling dynamics

To analyze the chatter mechanics, the power spectrum of a time series method was analyzed by considering cutting and structural dynamics. In this study, several time series models such as AR (burg, least square, yule walker, geometric lattice, instrument variable), ARX (arx, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proved that arx, armax and iv4 are more desirable and reliable algorithms than the others for the calculation of the chatter mode in the endmilling operation. The cutting forces Fx and Fz have more powerful effects on the chatter than Fy in the sense that there is no shifting or pseudo mode in the power spectrum.     

Volumetric three‐dimensional up‐conversion display medium

Abstract— Several rare‐earth‐doped fluoride crystals that are excited to emit visible light by sequential two‐photon absorption have been investigated as display‐medium candidates for static volumetric three‐dimensional displays. Dispersion of powders of these materials in a refractive‐index‐matched polymer is reported because such a medium may result in a scalable display. The scattering problem in such a medium is greatly reduced by index‐matching the polymer to the crystalline particles. An index‐matching condition that optimizes the performance is identified.     

Surface and normal ensembles for surface reconstruction

The majority of the existing techniques for surface reconstruction and the closely related problem of normal reconstruction are deterministic. Their main advantages are the speed and, given a reasonably good initial input, the high quality of the reconstructed surfaces. Nevertheless, their deterministic nature may hinder them from effectively handling incomplete data with noise and outliers. An ensemble is a statistical technique which can improve the performance of deterministic algorithms by putting them into a statistics based probabilistic setting. In this paper, we study the suitability of ensembles in normal and surface reconstruction. We experimented with a widely used normal reconstruction technique [Hoppe H, DeRose T, Duchamp T, McDonald J, Stuetzle W. Surface reconstruction from unorganized points. Computer Graphics 1992;71-8] and Multi-level Partitions of Unity implicits for surface reconstruction [Ohtake Y, Belyaev A, Alexa M, Turk G, Seidel H-P. Multi-level partition of unity implicits. ACM Transactions on Graphics 2003;22(3):463-70], showing that normal and surface ensembles can successfully be combined to handle noisy point sets.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

Hybrid pulse position modulation/ultrashort light pulse code-division multiple-access systems .I. Fundamental analysis

We propose a hybrid pulse position modulation/ultrashort light pulse code-division multiple-access (PPM/ULP-CDMA) system for ultrafast optical communications. The proposed system employs spectral CDMA encoding/decoding and PPM with very short pulse separation. The statistical properties of the encoded ULP are investigated with a general pulse model, and the performance of the proposed PPM/ULP-CDMA system is investigated. It is shown that we can improve upon the performance of other ULP-CDMA systems, such as those using on-off keying, by employing PPM. It is also shown that we can improve the performance of the proposed system by increasing the effective number of chips, by increasing the number of PPM symbols, and by reducing the ULP duration. The performance analysis shows that the aggregate throughput of the proposed PPM/ULP-CDMA system could be over 1 Tb/s.     

Integrated modelling under uncertainty in watershed-level assessment and management.

Uncertainty in water quality model predictions is inevitably high due to natural stochasticity, model uncertainty, and parameter uncertainty. An integrated modelling system (modified-BASINS) under uncertainty is described and demonstrated for use in receiving-water quality prediction and watershed management. A Monte Carlo simulation was used to investigate the effect of various uncertainty types on output prediction. Without pollution control measures in the watershed, the concentrations of total nitrogen (T-N) and total phosphorus (T-P) in the Hwaong Reservoir, considering three uncertainty types, would be less than about 4.4 and 0.23 mg L(-1), respectively, in 2012, with 90% confidence. The effects of two watershed management practices, wastewater treatment plants (WWTP) and constructed wetlands (WETLAND), were evaluated. The combined scenario (WWTP + WETLAND) was the most effective at improving reservoir water quality, bringing concentrations of T-N and T-P in the Hwaong Reservoir to less than 3.4 and 0.14 mg L(-1), 24 and 41% improvements, respectively, with 90% confidence. Overall, the Monte Carlo simulation in the integrated modelling system was practical for estimating uncertainty and reliable in water quality prediction. The approach described here may allow decisions to be made based on the probability and level of risk, and its application is recommended.