Performance study of linear and nonlinear diversity-combining techniques in synchronous FFH/MA communication systems over fading channels

Based on the Fourier-Bessel series and exponential characteristic function approach, the paper presents analytical bit-error-rate expressions for synchronous fast frequency-hopped spread-spectrum multiple-access systems over Rician fading channels with M-ary frequency-shift-keying modulation. Linear-combining, product-combining and clipper receivers are studied. Numerical results show that both the clipper and product-combining receivers perform significantly better than the linear-combining receiver. The clipper receiver with an optimum threshold level slightly outperforms the product-combining receiver. However, the product-combining receiver is the preferred diversity-combining method because it is completely nonparametric. In addition, the optimum diversity levels for various diversity-combining receivers over Rayleigh fading channels are higher than that of the Rician fading channels     

Exponential Stability of Interval Dynamical Systems with Quadratic Nonlinearity

This article proposes an approach for investigating the exponential stability of a nonlinear interval dynamical system with the nonlinearity of a quadratic type on the basis of the Lyapunov’s direct method. It also constructs an inner estimate of the attraction domain to the origin for the system under consideration.     

某厂锆（Zr）生产流程中不同产物的天然放射性核素含量测定

本文报道了某厂锆(Zr)生产流程中原料(锆英砂,主要成份为 ZrSiO_4)、半成品(ZrC,ZrCl_4)、废渣和成品锆中天然放射性核素~(238)U、~(226)Ra、~(232)Th 和~(40)K 含量测定结果。采用 NaI(Tl)γ能谱法进行测定,结果表明,原料、半成品和废渣中都含有一定的放射性,各生产环节应采取适当的防护措施;成品锆中基本不含放射性,可安全地应用于各个生产和生活领域。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.