Fabrication of Optically Transparent and Electrooptic Strontium Barium Niobate Ceramics

The tetragonal tungsten bronze (TTB) type of Sr _x Ba_{1− x} ^m Nb₂O₆ (SBN) (0.5 ≤ x ≤ 0.75) was synthesized by a mixed-oxide route. Using the two-step densification process of pressureless sintering followed by oxygen HIPing, transparent ceramics were successfully fabricated. Microstructural, dielectric, optical, and electrooptic properties were investigated. All single-phase TTB-type SBN showed the characteristics of relaxor ferroelectrics. The extinction coefficients of the sample with the highest transparency were calculated from transmission spectra to be 30.4, 5.8, and 2.4 cm⁻¹ at 600, 1450, and 2000 nm, respectively. The linear electrooptic coefficients for SBN55, r ₃₃ and r ₁₃, were 46 × 10⁻¹² and 21 × 10⁻¹² m/V at 633 nm, respectively.     

Lexical and sublexical translation of spelling to sound: Strategic anticipation of lexical status.

Two experiments on oral reading of single words compared naming performance in pure blocks of nonwords or exception words with performance in blocks of randomly mixed nonwords and exception words. Ss named exception words faster and made fewer regularization errors when they were not also prepared for nonwords. These data suggest Ss inhibit or ignore the computation of assembled phonology when only exception words are expected. Ss named nonwords faster, but no more accurately, when low-frequency exception words were not also anticipated. Thus, Ss' readiness to execute assembled phonology appears to be adjusted in relation to the likely time course of retrieval of learned pronunciations, when the latter must be attended to. This evidence for strategic dissociation between sublexical and lexical translation is discussed in relation to current models. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Form-specific visual priming in the right cerebral hemisphere.

Results of 4 experiments indicate that both within-modality and case-specific visual priming for words are greater when test stimuli are presented initially to the right cerebral hemisphere (RH). In contrast, neither within-modality nor case-specific explicit memory for words is greater when stimuli are presented initially to the RH. Priming is measured using word-stem completion, and explicit memory is measured using word-stem cued recall. In both cases, Ss first rate how much they like words, and then word stems are presented briefly to the RH (in the left visual field) or to the left hemisphere (in the right visual field). Results suggest that at least 2 separate systems encode the visual representations that produce priming. The system that is more effective in the RH is better at representing form-specific information, whereas another system that is not more effective in the RH does not distinguish among distinct instances of word forms. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mean-variance interactions in process improvement and capacity design

We investigate mean-variance interactions of processing time as applied to process improvement and capacity design. For general capacity cost and flowcost functions, we demonstrate that production processes fall into one of six regions on the mean-variance interaction plane, each with its own policy implications. The general model is specialized to the case of an M/G/1 queue with linear and separable mean and variance costs, and with flowcosts proportional to mean queue length. Optimal solutions for processing-time mean and variance are derived, and easily obtained operating parameters are used to identify appropriate process improvement policies. A simulation example of a production network taken from industry verifies the efficacy of the linear M/G/1 model in a more general setting. We conclude that intelligent management of both processing capacity (i.e. mean processing time) and processing-time variances can be powerful tools for both capacity design and process improvement.     

Violent recidivism: Assessing predictive validity.

[Correction Notice: An erratum for this article was reported in Vol 73(4) of Journal of Consulting and Clinical Psychology (see record 2007-16787-001). In this article, several errors are present on pp. 738 and 746. The corrections are listed in the erratum.] Until very recently, there has been little evidence of the ability of either clinicians or actuarial instruments to predict violent behavior. Moreover, a confusing variety of measures have been proposed for the evaluation of the accuracy of predictions. This report demonstrates that receiver operating characteristics (ROCs) have advantages over other measures inasmuch as they are simultaneously independent of the base rate for violence in the populations studied and of the particular cutoff score chosen to classify cases as likely to be violent. In an illustration of the value of this approach, the base rates of violence were altered with the use of data from 3.5-, 6-, and 10-year follow-ups of 799 previously violent men. Base rates for the 10-year follow-up were also altered by changing the definition of violent recidivism and by examining a high-risk subgroup. The report also shows how ROC methods can be used to compare the performance of different instruments for the prediction of violence. The report illustrates how ROCs facilitate decisions about whether, at a particular base rate, the use of a prediction instrument is warranted. Finally, some of the limitations of ROCs are outlined, and some cautionary remarks are made with regard to their use. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mouse lung epithelial cell lines--tools for the study of differentiation and the neoplastic phenotype

Several dozen lung epithelial cell lines have been established in culture over the past 20 years from normal lung explants and their spontaneous transformants, and from lung tumors that arose spontaneously or were induced with chemicals, viruses, or oncogenic transgenes. To provide information from which to choose appropriate lines for investigating problems in lung cell biology and pulmonary neoplasia, this review describes the origins of these lines and some of their characteristics. These include growth, morphology, tumorigenicity, ability to metastasize, xenobiotic metabolism, mutational status, signal transducing activities, cytogenetics, ability to form domes, and electric conductance. In addition to collecting this information in a single place for the first time, we describe previously unpublished apoptosis features of some of these lines. An increasing number of investigations are beginning to use these lines and this review contains references into 1997.     

Synthesis and Characterization of Amorphous Si2N2O

Amorphous silicon oxynitride powder was synthesized by nitridation of high-purity silica in ammonia at 1120°C. The resulting material was X-ray amorphous, and its chemical characteristics were determined by X-ray photoelectron spectroscopy (XPS) and ²⁹Si nuclear magnetic resonance (NMR). The XPS analysis showed a shift to lower binding energies for the Si₂ p peak with increasing nitrogen content. Upon initial nitridation, the full width at half maximum (FWHM) of the Si₂ p peak increased, but decreased again at higher nitrogen contents, thus showing the formation of a silicon oxynitride phase with a single or small range of composition. The ²⁹Si NMR analysis showed the formation of (amorphous) Si₃N₄ (Si–N₄) and possibly two oxynitride phases (Si–N₃O, Si–N₂O₂). It is concluded that while XPS, FT-IR, and nitrogen analysis may show the formation of an homogeneous, amorphous silicon oxynitride (Si₂N₂O) phase, the formation of phase–pure, amorphous Si₂N₂O is extremely difficult via this route.     

Measurement of the residual mechanical properties of crazed polycarbonate. I: Qualitative analysis

A new technique to quantify the bulk craze density of transparent plates was used to characterize the craze growth behavior of polycarbonate at various stress levels. The craze growth rates were found to exponentially increase with an increase in stress, obeying the Eyring equation for thermally activated processes in the presence of an applied stress. The residual mechanical properties of crazed polycarbonate were then correlated to the crazing stress, relative craze density and strain rate. The results show that increasing the bulk craze density does not affect the yield stress but decreases both the failure stress and ductility of polycarbonate. Also, a crazing stress of 40 MPa was found to cause a much larger degree of degradation of failure properties than a crazing stress of 45 MPa. Correlating the crazing stress to the craze microstructure revealed that fewer, larger crazes form at the lower crazing stress. Therefore, flaw size has a greater effect on the failure properties of polycarbonate than flaw quantity.     

A Chemical Kinetics Model to Predict Diesel Engine Performance. Part II. Bench-Test Procedures

Bench tests have been used to screen lubricants and additives for industrial fluids in machinery applications for a long time. As the cost of engine testing increases dramatically, the need for simple laboratory bench tests increases. Bench tests simulate a particular aspect of the engine operation such as oxidation or wear, but the engine operation blends both mechanical, chemical, and combustion processes together and allows these parameters to interact freely. There are many bench tests providing a measure of oxidation stability under simulated conditions. For a given application, while the generic aspects of the lubricant degradation mechanism may be similar, environmental factors such as oxygen availability, the presence of specific metals (catalytic effects), and residence times of the oil at high-temperature regions may be specific to that application. Universal bench-test procedures that can predict oxidation stability therefore are not feasible. As described in part I of this paper, a computer simulation program has been developed combining a chemical kinetic model and a finite-difference program to simulate the engine operating conditions to predict lubricant performance in a diesel engine. This paper describes the bench-test procedures used to determine the kinetic constants used in the kinetic model to describe the lubricant degradation processes. The bench tests are specifically designed for the determination of kinetic constants in general for a particular reaction path but take into account the particular environmental factors intrinsic in the Caterpillar 1K engine dynamometer test.