The effects of the pretreatment of intravenous high dose methylprednisolone on Na(+)-K(+)/Mg(+2) ATPase and lipid peroxidation and early ultrastructural findings following middle cerebral artery occlusion in the rat

The sodium-potassium activated and magnesium dependent adenosine-5'-triphosphatase (Na(+)-K(+)/Mg(+2) ATPase EC.3.6.1.3.) activity and lipid peroxidation and early ultrastructural findings were determined in rat brain at the acute stage of ischaemia produced by permanent unilateral occlusion of the middle cerebral artery (MCA). The effects of the pretreatment with intravenous high-dose methylprednisolone (MP) on these biochemical indices and ultrastructural findings were also evaluated in the same model. The rats were divided into four groups. In group I, 10 rats were used to determine Na(+)-K(+)/Mg(+2) ATPase activity and the extent of lipid peroxidation by measuring the malondialdehyde (MDA) content and normal ultrastructural findings. In group II on 20 rats, only subtemporal craniectomy was done in order to determine the effects of the surgical procedure on these indices and findings. This group was treated intravenously with saline solution before occlusion. In group III with MCA occlusion, saline solution was administered intravenously to 20 rats in the same amount of methylprednisolone used in group IV, ten minutes before the occlusion. In Group IV, a single high-dose (30 mg/kg) of methylprednisolone was administered intravenously, ten minutes before occlusion in 20 rats. After occlusion of the middle cerebral artery, Na(+)-K(+)/Mg(+2) ATPase activity was decreased promptly in the first ten minutes in the ischaemic hemisphere and remained at a lower level than the contralateral hemispheres in the same group and the normal levels in group I, during 120 minutes of ischaemia. A single dose methylprednisolone pretreatment prohibited the inactivation of Na(+)-K(+)/Mg(+2) ATPase. On the other hand, there was significant difference in malondialdehyde content between group I and group III. Malondialdehyde levels were significantly increased following ischaemia and a non-significant increase was observed in the contralateral hemisphere. Methylprednisolone treatment significantly decreased malondialdehyde content on the side of the ischaemic hemisphere. We conclude that there is a positive relationship between membrane-bound enzyme Na(+)-K(+)/Mg(+2) ATPase activity, malondialdehyde content and early ultrastructural changes in the treated group with MP. These data suggest that the pretreatment injection of high doses (30 mg/kg) methylprednisolone contribute to the protection of the brain from ischaemia with stabilization of the cell membrane by effecting the lipid peroxidation and the activation of Na(+)-K(+)/Mg(+2) ATPase.     

Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

The Monkman-Grant (M-G) and its modified parameters were evaluated for type 316LN and modified 9Cr-Mo stainless steels prepared with minor element variations. Several sets of creep data for the two alloy systems were obtained by constant-load creep tests in 550-650°C temperature range. The M-G parameters,m, m’,C, andC’ were proposed and discussed for the two alloy systems. Them value of the M-G relation was 0.90 in type 316LN steel and 0.84 in modified 9Cr-Mo steel. Them’, value of the modified relation was 0.94 in type 316LN steel and 0.89 in 9Cr-Mo steel. Although creep fracture modes and creep properties between type 316LN and modified 9Cr-Mo steels showed a basic difference, the M-G and its modified relations demonstrated linearity quite well. Them’ of modified relation almost overlapped regardless of the creep testing conditions and chemical variations in the two alloy systems, and the parameterm’ was closer to unity than that of the M-G relation.     

The corrosion behavior of sputter-deposited aluminum-tungsten alloys

Thin films on aluminum-tungsten alloys were prepared by co-deposition of pure aluminum and pure tungsten, each sputtered by an independently controlled magnetron source, on glass and sapphire substrates. Completely amorphous films were obtained in the Al₈₀W₂₀-Al₆₇W₃₃ composition range. Passivity and corrosion behavior of amorphous Al-W alloys were investigated in 1 M deaerated hydrochloric acid solution using polarization and impedance spectroscopy measurements and have been correlated with the properties of pure alloy components. Tungsten and sputter-deposited Al-W thin films are inherently passive materials while aluminum undergoes pitting corrosion in hydrochloric acid solution. The passive film formed at the OCP on each alloy possesses excellent electric and dielectric properties comparable to those of the isolating film on tungsten. The absolute impedance increases with increasing tungsten content in the alloy. According to electrochemical polarization measurements, alloying Al with W in solid solution significantly enhances the material's resistance to pitting corrosion by shifting the breakdown potential above 2000 mV (Al₆₇W₃₃) and lowering the corrosion rate at the OCP by more than two orders of magnitude. The most likely mechanism explaining the passivity of amorphous Al-W alloys, the Solute Vacancy Interaction Model (SVIM), involves the formation of complexes between highly oxidized solute atoms (W⁺⁶) and mobile cation vacancies, which restrict the transport of Cl⁻ through the oxide film and inhibit its breakdown in hydrochloric acid solution. The role that film stress relaxation effects and microscopic defects in amorphous Al-W films, of the some composition, and deposited on various substrates play in their corrosion resistance is discussed.     

Utilities in the sky?: Comparison of space-based and terrestrial solar power systems

Could huge arrays of space-based solar power systems one day supply utility scale electricity to the electric power grid on earth? How realistic a possibility is this option for alternative energy supply at the moment? Finley R. Shapiro, USA compares space-based and terrestrial solar power systems.     

PIM卧管式三旋在催化裂化装置上的应用

分析了PIM卧管式三旋在催化装置应用过程中所出现的问题 ,并且有针对性地进行了改造 ,取得了良好的效果