Reducing control points in lofted B-spline surface interpolation using common knot vector determination

A new algorithm for reducing control points in lofted surface interpolation to rows of data points is presented in this paper. The key step of surface lofting is to obtain a set of compatible B-spline curves interpolating each row. Given a set of points and their parameterization, a necessary and sufficient condition is proposed to determine the existence of interpolating B-spline curves defined on a given knot vector. Based on this condition, we first properly construct a common knot vector that guarantees the existence of interpolating B-spline curves to each row of points. Then we calculate a set of interpolating B-spline curves defined on the common knot vector by energy minimization. Using this method, fewer control points are employed while maintaining a visually pleasing shape of the lofted surface. Several experimental results demonstrate the usability and quality of the proposed method.     

Pitchfork bifurcation and flip-flop operation with a coupled nonlinear system

A ring cavity system consisting of two hybrid Michelson interferometers coupled together with feedback is constructed. This system shows spatial bifurcation and can be utilized as an all-optical flip-flop device. We demonstrate experimentally a flip-flop operation by use of only a positive pulse in this system.     

Scalable optical hypercube-based interconnection network for massively parallel computing

Two important parameters of a network for massively parallel computers are scalability and modularity. Scalability has two aspects: size and time (or generation). Size scalability refers to the property that the size of the network can be increased with nominal effect on the existing configuration. Also, the increase in size is expected to result in a linear increase in performance. Time scalability implies that the communication capabilities of a network should be large enough to support the evolution of processing elements through generations. A modular network enables the construction of a large network out of many smaller ones. The lack of these two important parameters has limited the use of certain types of interconnection networks in the area of massively parallel computers. We present a new modular optical interconnection network, called an optical multimesh hypercube (OMMH), which is both size and time scalable. The OMMH combines positive features of both the hypercube (small diameter, high connectivity, symmetry, simple routing, and fault tolerance) and the torus (constant node degree and size scalability) networks. Also presented is a three-dimensional optical implementation of the OMMH network. A basic building block of the OMMH network is a hypercube module that is constructed with free-space optics to provide compact and high-density localized hypercube connections. The OMMH network is then constructed by the connection of such basic building blocks with multiwavelength optical fibers to realize torus connections. The proposed implementation methodology is intended to exploit the advantages of both space-invariant free-space and multiwavelength fiber-based optical interconnect technologies. The analysis of the proposed implementation shows that such a network is optically feasible in terms of the physical size and the optical power budget.     

Metal Ions versus Protons: Tracking of Charge-Carrier Insertion into a Cathode Oxide in Aqueous Rechargeable Batteries

Protons in aqueous electrolytes can perform as an additional type of charge carrier for insertion/extraction in addition to the primary carrier cations in aqueous rechargeable batteries. Despite many diverse claims regarding the effect of protons, mutually conflicting experimental results and their interpretations without direct evidence have been reported over the last decade. Systematic examinations and analyses are thus imperative to clarify the conditions of proton insertion in aqueous rechargeable batteries. Utilizing V₂O₅ as a model cathode and beaker-type cells with a sufficient amount of ZnSO₄ aqueous electrolytes in this work, it is demonstrated that protons are inserted into the cathode prior to Zn-ions in low-pH conditions (pH ≤ 3.0). In stark contrast, the influence of protons on the discharge voltage and capacity is insignificant, when either the pH becomes higher (pH ≥ 4.0) or the electrolyte volume is considerably low in coin-type cells. Similar behavior of pH-dependent proton insertion is also verified in Na–, Mg–, and Al-ion electrolytes. Providing a resolution to the controversy regarding proton insertion, the present study emphasizes that the influence of protons substantially varies depending on the pH and relative volume of electrolytes in aqueous batteries.     

Designing Metallic and Insulating Nanocrystal Heterostructures to Fabricate Highly Sensitive and Solution Processed Strain Gauges for Wearable Sensors

All‐solution processed, high‐performance wearable strain sensors are demonstrated using heterostructure nanocrystal (NC) solids. By incorporating insulating artificial atoms of CdSe quantum dot NCs into metallic artificial atoms of Au NC thin film matrix, metal–insulator heterostructures are designed. This hybrid structure results in a shift close to the percolation threshold, modifying the charge transport mechanism and enhancing sensitivity in accordance with the site percolation theory. The number of electrical pathways is also manipulated by creating nanocracks to further increase its sensitivity, inspired from the bond percolation theory. The combination of the two strategies achieves gauge factor up to 5045, the highest sensitivity recorded among NC‐based strain gauges. These strain sensors show high reliability, durability, frequency stability, and negligible hysteresis. The fundamental charge transport behavior of these NC solids is investigated and the combined site and bond percolation theory is developed to illuminate the origin of their enhanced sensitivity. Finally, all NC‐based and solution‐processed strain gauge sensor arrays are fabricated, which effectively measure the motion of each finger joint, the pulse of heart rate, and the movement of vocal cords of human. This work provides a pathway for designing low‐cost and high‐performance electronic skin or wearable devices.     

Metal microparticle – Polymer composites as printable,bio/ecoresorbable conductive inks

Biologically and environmentally resorbable electronic devices support application possibilities that cannot be addressed with conventional technologies. This paper presents highly conductive, water-soluble composites that can be printed to form contacts, interconnects, antennas, and other important features that are essential to nearly all systems of this type. An optimized material formulation involves in situ polymerization to yield a polyanhydride containing a dispersion of molybdenum microparticles at appropriate concentrations. Comparisons of essential physical and electrical properties of these materials to those of composites formed with other polymers and other metal microparticles reveal the relevant considerations. Various functional demonstrations of screen-printed test structures and devices illustrate the suitability of these conductive inks for use in water-soluble electronic devices. A key advantage of the material introduced here compared to alternatives is its ability to maintain conductance over significant periods of time while immersed in relevant aqueous solutions. Studies involving live animal models establish the biocompatibility.     

Topological derivative-based technique for imaging thin inhomogeneities with few incident directions

Many non-iterative imaging algorithms require a large number of incident directions. Topological derivative-based imaging techniques can alleviate this problem, but lacks a theoretical background and a definite means of selecting the optimal incident directions. In this paper, we rigorously analyse the mathematical structure of a topological derivative imaging function, confirm why a small number of incident directions is sufficient, and explore the optimal configuration of these directions. To this end, we represent the topological derivative-based imaging function as an infinite series of Bessel functions of integer order of the first kind. Our analysis is supported by the results of numerical simulations.     

Localization of atrial natriuretic peptide receptors in the rat tongue and hard palate

The effect of a naturally occurring plant phenolic constituent (the acylphloroglucinol derivative, jensenone, derived from Eucalyptus jensenii) on the food intake of two folivorous marsupials, the common ringtail (Pseudocheirus peregrinus) and the common brushtail possum (Trichosurus vulpecula) was studied. When fed diets containing varying concentrations of jensenone, both species regulated their intake of jensenone so as not to exceed a ceiling intake. This ceiling was about twice as high for common ringtails as for common brushtails from northern Australia. Southern populations of common ringtails showed greatly reduced capacities to tolerate jensenone. When common brushtails were injected (0.5 mg.kg-0.75 body mass) with ondansetron (a selective antagonist of serotonin 5HT3 receptors), they ate significantly more jensenone than animals injected with physiological saline. The same pattern was observed when common ringtails were fed diets containing both jensenone and ondansetron (0.0035 mg.g-1 wet mass of diet). Ondansetron injection had no effect on food intake when the food did not contain jensenone while the addition of higher doses of ondansetron to diets of common ringtails very slightly reduced food intakes of a non-jensenone diet. When common brushtails were given 50 mg of jensenone by gastric lavage, their average subsequent intake of dietary jensenone matched the difference between the daily threshold and the dose given, although the response of individuals was highly variable. Lavage with water alone had no effect on subsequent jensenone intake compared with the pre-dose period. We interpret these results as evidence that the antifeedant effects of jensenone and related compounds are partly mediated by serotonin action on 5HT3 receptors most likely via "nausea" to condition a food aversion.