Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.     

A simple SNR representation method for AMC schemes of MIMO systems with ML detector

Adaptive modulation and coding (AMC) is a powerful technique to enhance the link performance by adjusting the transmission power, channel coding rates and modulation levels according to channel state information. In order to efficiently utilize the AMC scheme, an accurate signal-to-noise ratio (SNR) value is normally required for determining the AMC level. In this paper, we propose a simple method to represent the SNR values for maximum likelihood (ML) detector in multi-input multi-output (MIMO) systems. By analyzing the relation between the upper bound and the lower bound of the ML detector performance, we introduce an efficient way to determine the SNR for the ML receiver. Based on the proposed SNR representation, an AMC scheme for single antenna systems can be extended to MIMO systems with ML detector. From computer simulations, we confirm that the proposed SNR representation allows us to achieve almost the same system throughput as the optimum AMC systems in frequency selective channels with reduced complexity.     

Studies on the performance characteristics and improvements of the piezoelectrically-driven micro gas compressors

This study presents the main characteristics of a micro gas compressor produced by microfabrication techniques on silicon wafers. The compressor consists of a compression chamber, check valves and a silicon membrane where the piezoelectric bimorph actuator is installed. Compressor performance was investigated under various working conditions of input voltage and frequency to the actuator at several downstream back pressures. Volume stroke ratio is a critical parameter for gas compressors. However, micro actuators do not generally produce large displacement, so the volume stroke ratio of the micro compressor is expected to be significantly less than that of conventional mechanical compressors. Therefore, the possibility of using dual compression was also investigated in order to improve micro compressor performance. The performance of the micro compressor is evaluated in this study through experiments and simulation.     

A 0.8-V accurately tuned linear continuous-time filter

An accurately tuned low-voltage linear continuous-time filter is presented in this paper. Accurate tuning is achieved using time-constant matched master-slave tuning combined with power-up mismatch calibration. A low-pass biquad designed for a corner frequency of 115 kHz achieves better than -80-dB total harmonic distortion with a 250-mV/sub pp/ 10-kHz input signal. The prototype implemented in 0.18-/spl mu/m CMOS process occupies an area of 0.4 mm/sup 2/ and dissipates 4.6 mW (2.6 mW for the filter and 2 mW for tuning) of power.     

Polydopamine Encapsulation of Fluorescent Nanodiamonds for Biomedical Applications

Fluorescent nanodiamonds (FNDs) are promising bioimaging probes compared with other fluorescent nanomaterials such as quantum dots, dye‐doped nanoparticles, and metallic nanoclusters, due to their remarkable optical properties and excellent biocompatibility. Nevertheless, they are prone to aggregation in physiological salt solutions, and modifying their surface to conjugate biologically active agents remains challenging. Here, inspired by the adhesive protein of marine mussels, encapsulation of FNDs within a polydopamine (PDA) shell is demonstrated. These PDA surfaces are readily modified via Michael addition or Schiff base reactions with molecules presenting thiol or nitrogen derivatives. Modification of PDA shells by thiol terminated poly(ethylene glycol) (PEG‐SH) molecules to enhance colloidal stability and biocompatibility of FNDs is described. Their use as fluorescent probes for cell imaging is demonstrated; it is found that PEGylated FNDs are taken up by HeLa cells and mouse bone marrow‐derived dendritic cells and exhibit reduced nonspecific membrane adhesion. Furthermore, functionalization with biotin‐PEG‐SH is demonstrated and long‐term high‐resolution single‐molecule fluorescence based tracking measurements of FNDs tethered via streptavidin to individual biotinylated DNA molecules are performed. This robust polydopamine encapsulation and functionalization strategy presents a facile route to develop FNDs as multifunctional labels, drug delivery vehicles, and targeting agents for biomedical applications.     

Stretchable,Transparent Zinc Oxide Thin Film Transistors

Stretchable and transparent thin film transistors (TFTs) with intrisically brittle oxide semiconductors are built using a wavy structural configuration that can provide high flexibility and stretchability. After device fabrication procedures including high temperature annealing, the oxide semiconductor‐based TFT arrays can be transferred directly to plastic or rubber substrates, without an additional device process, using transfer printing methods. This procedure can avoid some of the thermal degradation problems associated with plastic or rubber substrates by separating them from the annealing procedure needed to improve the device performance. These design and fabrication methods offer the possibility of developing a new format of stretchable electronics.     

Orthogonal code hopping multiplexing

An orthogonal code hopping multiplexing scheme is proposed as a statistical multiplexing scheme for an orthogonal downlink in order to accommodate more orthogonal downlink channels than orthogonal codewords for mobile stations, and its performance is evaluated.     

Equalization digital on-channel repeater in the single frequency networks

Digital On-Channel Repeater (DOCR) can be used for Single Frequency Networks (SFN's). It is much simple and low cost compared to Distributed Transmitter which needs Studio to Transmitter Link (STL). However, traditional DOCR has one of those defects such as a power limit, a long time system processing delay or a poor output signal quality. In order to overcome all of those defects, we introduce Equalization DOCR (EDOCR) which regenerates the original 8-VSB output signal with relatively short time system processing delay. Lab. and Field test results show that the EDOCR can eliminate the loop-back signal up to 5.5 dB with 5.5 /spl mu/s system processing delay. By using EDOCR, we can save spectrum resources and extend coverage areas.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.