Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Identification and characterization of human metabolites of CAI [5-amino-1-1(4''-chlorobenzoyl-3,5-dichlorobenzyl)-1,2,3-triazole- 4-carboxamide)

BACKGROUND: Bronchoscopic bronchoalveolar lavage in children to investigate bronchial disorders such as asthma has both ethical and procedural difficulties. OBJECTIVE: The aim of this study was to establish a standardized non-bronchoscopic method to perform bronchoalveolar lavage in children attending for elective surgery to obtain normal cellular data. METHODS: Bronchoalveolar lavage was performed on normal children (n = 55) by infusing saline (20 mL) through an 8 FG suction catheter passed after endotracheal intubation. Oxygen saturation, heart and respiratory rate were monitored during the bronchoalveolar lavage procedure. Cellular analysis and total protein estimation of the lavage fluid were performed. Epithelial lining fluid volume was calculated (n = 15) using the urea dilution method. RESULTS: The procedure was well tolerated by all children. Total cell count and differential cell count for children (macrophages 70.8 +/- 2.3%, lymphocytes 3.8 +/- 0.6%, neutrophils 5.7 +/- 1.0%, eosinophils 0.14 +/- 0.03%, epithelial cells 19.6 +/- 2.1%, mast cells 0.21 +/- 0.02%) were similar to those reported for adults. Age and sex comparisons revealed no differences between groups. The mean total protein recovered in the cell free supernatant was 49.72 +/- 4.29 mg/L and epithelial lining fluid volume was 0.82 +/- 0.11% of return lavageate. CONCLUSION: This method allows bronchoalveolar lavage to be performed safely and quickly on children attending for routine elective surgery. Using this method and taking the 'window of opportunity' of elective surgery, the presence or absence of airway inflammation could be studied in children with various patterns of asthma during relatively asymptomatic periods.     

Intelligent monitor for typhoon in IoT system of smart city

The Journal of Supercomputing - Accidents often occur in the earth—typhoons, floods, earthquakes, traffic accidents and so on. Whether these accidents can be timely and effectively responded...     

The implementation of technical practices and human factors of the toyota production system in different industries

The Toyota Production System (TPS) can result in huge benefits for companies and has been widely implemented around the world. Nevertheless, most adopters emphasize only the technical practices of the TPS, but neglect the critical role of human factors in the implementation of the TPS. Therefore, this study aims at developing an integrated TPS model that fully integrates the technical elements and human elements of the TPS with Total Quality Management (TQM) practices. An empirical study was conducted to confirm the causal relationships among these constructs. In the empirical study, questionnaires were mailed and e‐mailed to 620 companies that had implemented the TPS, and 151 of the completed questionnaires were valid. These 151 respondents were divided into eight categories. The results revealed that the implementation level of each construct was significantly different in each industry. The automobile and motorcycle industries have put a great deal of effort into the application of Humanity, Human Resource Management (HRM), and TQM practices and obtained good results. Other industries, however, ignored the implementation of HRM practices. The results also revealed that the early adopters enjoyed significant benefits from the implementation of the TPS, which led high‐tech companies to start adopting TPS practices and become lean enterprises. © 2011 Wiley Periodicals, Inc.     

Fatigue crack-propagation in annealed poly(butylene terephthalate)

Samples with the same percentage crystallinity, supermolecular structure and lamellar thickness but different average molecular weight were prepared to distinguish the effect of tie chain density on fatigue crack propagation (FCP) behaviour. This alteration in molecular weight was accomplished by controlled chain degradation during thermal annealing. A significant decrease in FCP resistance was observed when samples were annealed at different temperatures for various amounts of time. In addition, an examination of the fracture surfaces of these specimens indicates a transition to a more brittle-type behaviour when annealed for longer periods of time at any specific annealing temperature. The decrease in FCP resistance is attributed to a decrease in the tie chain density.     

Resveratrol Butyrate Esters Inhibit BPA-Induced Liver Damage in Male Offspring Rats by Modulating Antioxidant Capacity and Gut Microbiota

Resveratrol can affect the physiology or biochemistry of offspring in the maternal–fetal animal model. However, it exhibits low bioavailability in humans and animals. Fifteen-week SD pregnant female rats were orally administered bisphenol A (BPA) and/or resveratrol butyrate ester (RBE), and the male offspring rats (n = 4–8 per group) were evaluated. The results show that RBE treatment (BPA + R30) compared with the BPA group can reduce the damage caused by BPA (p < 0.05). RBE enhanced the expression of selected genes and induced extramedullary hematopoiesis and mononuclear cell infiltration. RBE increased the abundance of S24-7 and Adlercreutzia in the intestines of the male offspring rats, as well as the concentrations of short-chain fatty acids (SCFAs) in the feces. RBE also increased the antioxidant capacity of the liver by inducing Nrf2, promoting the expression of HO-1, SOD, and CAT. It also increased the concentration of intestinal SCFAs, enhancing the barrier formed by intestinal cells, thereby preventing BPA-induced metabolic disruption in the male offspring rats, and reduced liver inflammation. This study identified a potential mechanism underlying the protective effects of RBE against the liver damage caused by BPA exposure during the peri-pregnancy period, and the influence of the gut microbiota on the gut–liver axis in the offspring.     

Evaluation of the superplastic formability of SP-inconel 718 superalloy

The superplastic formability of SP- lnconel 718 superalloy was evaluated using the argon blowing method. Relationships among superplastic forming parameters (forming temperature, argon pressure, and forming time) and specific dome height (dome height/workpiece diameter) were investigated, as were changes in material properties after superplastic forming. Experimental results showed the optimum forming temperature range for SP- lnconel 718 to be between 975 and 995 °C. During the superplastic forming process, 5- phase precipitates formed at grain boundaries and limited the grain growth, which is considered beneficial for superplastic deformation. On the other hand, increasing the forming deformation also increased the formation of cavities, which can be attributed to the existence of niobium- rich inclusions. This degraded the superplasticity of the superalloy. Electrochemical tests showed that the corrosion resistance of SP- lnconel 718 after superplastic forming worsened because of the existence of both S- phase precipitates and niobium- rich inclusions.     

Estimating discharge in gravel‐bed river using non‐contact ground‐penetrating and surface‐velocity radars

Discharge measurement is a critical task for gravel‐bed channels. Under high‐flow conditions, the elevation of the riverbed changes significantly by intensive torrential flow. The stage–discharge relations commonly used for stream discharge estimation may no longer be adequate. The contact‐type velocity measuring is also subject to measurement errors and/or instrument failures by the high‐flow velocities, driftwood, stumps, and debris. This study developed a new real‐time method to estimate river discharge in gravel‐bed channels. A systematic measuring technology combining ground‐penetrating radar and surface‐velocity radar was employed. The rating curves representing the relations of water surface velocity to the channel cross‐sectional mean velocity and flow area were established. Stream discharge was then deduced from the resulting mean velocity and flow area. The proposed method was examined in a steep gravel‐bed reach of the Cho‐Shui River in central Taiwan. The estimated stream discharge during three flood events were compared to the prediction by using the stage–discharge relation and the index‐velocity method. The proposed method of this study is capable of computing reasonable values of discharge for an entire flood hydrograph, whereas the other two methods tend to produce large extrapolation errors. Moreover, when the computed discharge is used in 2D flood flow simulation, the proposed method demonstrates better performance than the commonly used stage–discharge and index‐velocity methods.     

Evaluation of a haptics-based virtual reality temporal bone simulator for anatomy and surgery training

Introduction

Virtual reality simulation training may improve knowledge of anatomy and surgical skills. We evaluated a 3-dimensional, haptic, virtual reality temporal bone simulator for dissection training.

Methods

The subjects were 7 otolaryngology residents (3 training sessions each) and 7 medical students (1 training session each). The virtual reality temporal bone simulation station included a computer with software that was linked to a force-feedback hand stylus, and the system recorded performance and collisions with vital anatomic structures. Subjects performed virtual reality dissections and completed questionnaires after the training sessions.

Results

Residents and students had favorable responses to most questions of the technology acceptance model (TAM) questionnaire. The average TAM scores were above neutral for residents and medical students in all domains, and the average TAM score for residents was significantly higher for the usefulness domain and lower for the playful domain than students. The average satisfaction questionnaire for residents showed that residents had greater overall satisfaction with cadaver temporal bone dissection training than training with the virtual reality simulator or plastic temporal bone. For medical students, the average comprehension score was significantly increased from before to after training for all anatomic structures. Medical students had significantly more collisions with the dura than residents. The residents had similar mean performance scores after the first and third training sessions for all dissection procedures.

Discussion

The virtual reality temporal bone simulator provided satisfactory training for otolaryngology residents and medical students.