Possibility of superconductivity with highT c in La-Sr-Nb-O system

We prepared La-Sr-Nb-O system samples both in bulk form and as a film, with sharp resistive transitions at temperatures of 228–323 K, depending on the annealing conditions. The sharp resistive transitions might be attributable to superconductivity. Magnetic ordering was observed over a narrow temperature range around 40 K for some of the samples.     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

Effects of support and additive on oxidation state and activity of Pt catalyst in propane combustion

The effects of support and additive on the oxidation state and catalytic activity of Pt catalyst in the low temperature propane combustion were systematically investigated on Pt/MgO, Pt/Al₂O₃ and Pt/SiO₂–Al₂O₃. The catalytic activity varied much with both support materials and additives. The catalyst on the more acidic support showed higher activity, and the catalytic activity on every support materials increased as the electronegativity of additives increased, while some additives decreased the activity. The oxidation state of platinum, estimated by white line intensity of Pt L_III-edge XANES spectrum, also varied with the support and additives, and additives with higher electronegativity greatly prevented the platinum from its oxidation under oxidising atmosphere. Among almost all the catalysts with various supports and various additives, a clear relationship was observed between the oxidation state of platinum and the catalytic activity; the more metallic platinum showed higher activity. Thus, it was concluded that the total electrophilic/electrophobic property derived from those of the support and additive controls the oxidation state of platinum, which intensively affects the catalytic activity; i.e. higher electrophilic property provides less oxidised platinum, resulting in high catalytic activity. The mechanism of this effect was also discussed on the basis of thermochemical data, and it was proposed that the electrophobic materials promote the noble metal oxidation since the noble metal oxo-anion such as PtO^δ− is more stabilised with electrophobic cation.     

Bonelike Hydroxyapatite Induction by a Gel-Derived Titania on a Titanium Substrate

Gel-derived titania coating on commercial pure (c.p.) titanium induces hydroxyapatite formation onto its surface from a simulated body fluid (SBF, a metastable calcium phosphate solution). The induced apatite is similar to bone apatite in that it is poorly crystallized, calcium-deficient, and carbonate-containing. Furthermore, the carbonate (CO^2–3) groups go into the apatite lattice and lie at the positions of PO^3–4 and OH^– to replace these ionic groups, resembling the (CO^2–3) groups of bone apatite. Therefore, the apatite induced by the gel-derived titania is said to be bonelike. A chemical stimulation, stemming from abundant hydroxyl groups and negative charges at the surface of the titania gel, is believed to be responsible for the bonelike apatite induction. The potential of bone-bonding is predicted for the gel-derived titania, for it is an efficient bonelike apatite inducer in the SBF.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeation and separation characteristics of methanol/n-pentanol systems and n-propanol/n-heptane systems through nylon 12 membranes were studied by changing the feed composition of the binary organic mixtures. These characteristics were discussed from the viewpoints of physical and chemical nature of the permeating molecules and the membrane.     

Kinetic study on the first stage during thermal degradation of polystyrene

The kinetic parameters of the first stage of polystyrene degradation have been investigated to elucidate the reaction mechanisms using the flow reactor system. The decrease in molecular weight of polystyrene was recorded at minute intervals over the temperature range 310°–390°C. Generally, the first and second stages were observed by thermogravimetric analysis (t.g.a.), however in the early stage of the degradation volatile yields of at least 5% occurred. Therefore, using t.g.a. analysis it is difficult to detect this earlier stage. It became evident that the first stage in the earlier part of the reaction could be detected by g.p.c. analysis. We have observed the hidden kinetic parameters of the nature of the first stage of the polystyrene degradation. The results indicate that the main chains were degraded randomly with the small quantitative volatile groups in the first stage and the rates of decrease in molecular weight in the first stage against reaction temperatures were evaluated as log k_s = 12.0 ? 41300/RT.     

Development of AAS resin by the emulsion–suspension polymerization method

In order to improve the weatherability of acryonitrile—styrene—butadiene rubber graft polymer (ABS resin), an attempt was made to develop a resin (AAS resin) in which acrylic rubber of good weatherability was used instead of butadiene rubber. First, by copolymerizing dicyclopentenyl-methacrylate (DCP-MA,3%) with butyl acrylate, crosslinked acrylic rubber was obtained. This also introduced grafting sites into the rubber. Next, methods of graft copolymerizing styrene and acrylonitrile with this rubber were examined. An emulsion–suspension polymerization method was developed in which the initial stage of the polymerization, emulsion polymerization, changed into suspension polymerization during the process. By this method of polymerization, rubber particles were combined and enlarged, bringing about a graft-type resin with high impact resistance. This polymerization method is industrially useful because particle-shaped resins are obtained without the need of a salting-out process. The AAS resin, obtained in this way, has much improved weatherability over ABS resin and shows strength equal to that of ABS resin. © 1992 John Wiley & Sons, Inc.     

Stabilization of β-Bi2O3 by Sb2O3 Doping

The metastable β form of bismuth sesquioxide was obtained by doping antimony oxide. The solubility of antimony was 4 to 10 at. %in β specimens, where more than 75% of the antimony atoms were valenced at 5+.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.