Relationship between local structure and stability in hen egg white lysozyme mutant with alanine substituted for glycine

We prepared five mutant lysozymes in which glycines whose dihedralangles are located in the region of the left-handed helix, Gly49,Gly67, Gly71, Gly102 and Gly117, were mutated to an alanineresidue. From analyses of their thermal stabilities using differentialscanning calorimetry, most of them were more destabilized thanthe native lysozyme, except for the G102A mutant, which hasa stability similar to that of the native lysozyme at pH 2.7.As for the destabilized mutant lysozymes, their X-ray crystallographicanalyses showed that their global structures did not changebut that the local structures changed slightly. By examiningthe dihedral angles at the mutation sites based on X-ray crystallographicresults, it was found that the dihedral angles at these mutationsites tended to adopt favorable values in a Ramachandran plotand that the extent and direction of their shifts from the originalvalue had similar tendencies. Therefore, the change in dihedralangles may be the cause of the slight local structural changesaround the mutation site. On the other hand, regarding the mutationof G102A, the global structure was almost identical with thatof the native structure but the local structure was drasticallychanged. Therefore, it was suggested that the drastic localconformational change might be effective in releasing the unfavorableinteraction of the native state at the mutation site.     

Ferroelectric and Magnetic Properties in Room‐Temperature Multiferroic GaxFe2−xO3 Epitaxial Thin Films

GaFeO₃‐type iron oxide is a promising room‐temperature multiferroic material due to its large magnetization. To expand its usability, controlling the ferroelectric and magnetic properties is crucial. In this study, high‐quality Ga_xFe_2–xO₃ (x = 0–1) epitaxial films are fabricated and their properties are systematically investigated. All films exhibit room‐temperature out‐of‐plane ferroelectricity, showing that the coercive electric field (E_c) decreases monotonically with x. Additionally, the films show in‐plane ferrimagnetism with a Curie temperature (T_C) >350 K at x = 0–0.6. The coercive magnetic field (H_c) decreases with x at x ≤ 0.6, but shows a constant value at x > 0.6, whereas the saturated magnetization (M_s) increases with x at x ≤ 0.6, but decreases with x at x > 0.6. X‐ray magnetic circular dichroism reveals that the large magnetization at x = 0.6 is derived from Fe³⁺ (3d⁵) at octahedral sites. The controllable range of the E_c, H_c, and M_s values at room temperature (400–800 kV cm^?1, 1–8 kOe, and 0.2–0.6 µ_B/f.u.) is very wide and differs from those of well‐known multiferroic BiFeO₃. Furthermore, the Ga_xFe_2?xO₃ films exhibit room‐temperature magnetocapacitance effects, indicating that adjusting T_C near room temperature is useful to achieve large room‐temperature magnetocapacitance behavior.     

超声波探头位置对Al-5.7%Cu铸锭凝固组织的影响

研究了超声波探头位置变化对Al-5.7%Cu合金铸锭凝固组织的影响,考察了探头水平位置变化对等轴晶占有率的影响,探讨了超声波作用下晶粒细化机理。结果表明:当探头浸入深度相同且位于铸型中心线时,得到的细等轴晶区最大,且呈对称分布;当探头的位置贴近铸型壁时,细等轴晶区向探头端面附近集中并缩减,柱状晶区进一步扩大。超声波的细化效果来自于声空化造成微区瞬时过冷,以及动态形核;而声流造成凝固的枝晶破碎,提供结晶核心。     

Effects of PbTiO 3 Seed Layer on the Characteristics of RF-Sputtered Pb(Zr 0.5 ,Ti 0.5 )O 3 Thin Films

The effects of seed layers on the characteristics of rf-sputtered lead zirconium titanate thin films were investigated. Prior to sputtering, PbTiO 3 seed layers (100 nm) were deposited onto the Pt/Ti/Si and Pt/Si substrates by sol-gel (spin coating) processing method. Structure-property relation was studied as functions of substrate temperature and sputtering conditions. Special efforts were given in optimizing the deposition parameters to prepare the films in the perovskite phase without post deposition annealing. Dielectric constant and loss tangent of the films were in the range 800-950 and 0.04 -0.06, respectively. Remanent polarization and coercive field were 23.1 w C/cm 2 and 75kV/cm, respectively, for the films without PbTiO 3 seed layer, where as the corresponding quantities for in situ -deposited perovskite Pb(Zr, Ti)O 3 films on PbTiO 3 seed layer were 28 w C/cm 2 and 65 kV/cm, respectively.     

Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

Rapid evaluation of oxidation catalysis by gas sensor system: total oxidation, oxidative dehydrogenation, and selective oxidation over metal oxide catalysts

The rapid evaluation of catalysis is an indispensable technology for the success of combinatorial chemistry. A small-sized, less expensive, easily operating screening is desirable for parallel settings which dramatically shortens the evaluation time. Recent advances in gas sensors have enabled us to use them for the rapid evaluation of oxidation catalysis. Three typical catalytic oxidations over metal oxide catalysts were evaluated by gas sensor systems optimized for each catalytic system. The first one is the total oxidation of carbon monoxide in air. Five catalytic combustion-type gas sensors were used in a parallel reactor system to shorten the evaluation time. The second one is the oxidative dehydrogenation (ODH) of ethane over the mixed oxide of nickel and iron. The evaluation of the ODH catalysis was performed by a selective olefin sensor which determines the concentration of C₂H₄ in C₂H₆. The third one is the selective oxidation catalysis of propane over alkali modified Fe/SiO₂. The effluents including CO, CO₂, aldehydes and ketones in propane were analyzed by the CO, CO₂ and semiconductor-type gas sensors selective toward aldehydes and ketones. These evaluation results indicated that gas sensors have a good potential for the rapid evaluation of oxidation catalysts.     

A TEM study on melt-crystallized poly(butylene terephthalate)

A study was made to investigate an optimum condition for ruthenium tetraoxide staining of poly(butylene terephthalate) (PBT) with glass transition temperature as low as ca. 23 degrees C for TEM observation of melt-grown PBT crystals. The morphological study of ultrathin sections prepared based on optimum staining at 25 degrees C for 8 h revealed formation of fringed-micellar crystal nuclei in the early stage and folded-chain fringed-micellar crystals in the later stage of isothermal crystallization at 40 degrees C from melt. The fraction of chain-folded crystals increased with increasing crystallization temperature from the quantitative analysis of crystal thickness in comparison with the reported morphology using the replica method.     

Effect of mixing ratio on bactericidal action of MgO–CaO powders

MgO–CaO powders were prepared with different molar ratios (MgO/CaO) at 1400 °C for 2 h in air. By using the powder samples obtained, the change in bactericidal effect as a function of MgO–CaO composition was studied by colony count method. From the XRD measurements, it was found that CaO solid solution was formed by the replacement of Mg²⁺ ion with larger Ca²⁺ ion. However, no formation of MgO solid solution was observed. The average particle size and the specific surface area of the samples used in this study were about 0.2 m and 10.5m²g^–1, respectively. The pH values of physiological saline containing powder samples increased with the increase of CaO content, and the value reached 12.1 in sample with the molar ratio (MgO/CaO) of 0.25. From the results of bactericidal tests for Staphylococcus aureus, it was found that the bactericidal effect increased with the increase of CaO content in the samples.     

Novel circular-beam equalizing techniques that use graded-index fiber optics for a high-power laser diode

We demonstrate a novel method of equalizing a laser diode (LD) beam into a circular beam. This method uses the twist effect of graded index (GI) fiber optics. An asymmetric LD beam with beam qualities of M2 = 500 in the slow axis and M2 = 4 in the fast axis is converted successfully into a symmetric circular beam with a beam quality of M2 = 175. The circular-output beam with 92% coupling efficiency from the fiber input to the fiber output is obtained with a 5-m-long GI1200 (1200 means a core diameter of 1200 microm) fiber for a 2-W LD array. We extend the experiments to a higher-power source with higher asymmetric beam qualities of M2 = 3000 and M2 = 4. By slightly bending the GI10000 (10000 means a core diameter of 10,000 microm) fiber, we have succeeded in generating a symmetric beam with a improved beam quality of M2 = 2000. The average beam quality is preserved when the asymmetric ratio is not high, and the beam quality degradation ratio is investigated up to asymmetric ratios of 750.